26-21SYGC/S530-E2/TR8

Page 1

Page 2

EVERLIGHT ELECTRONICS CO.,LTD. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 9 Device No. :SZDSE-261- Prepared date:8-Apr-2009 Prepared by: Huang yongxin Technical Data Sheet 1.6mm round Subminiature Chip LEDs 26-21SYGC/S530-E2/TR8 Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. ․It does not contain the TBBA material. Descriptions ․The 26-21 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Part No. Material Emitted Color Resin Color 26-21SYGC/S530-E2/TR8 AlGaInP Brilliant Yellow Green Water Clear

Page 3

EVERLIGHT ELECTRONICS CO.,LTD. 26-21SYGC/S530-E2/TR8 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 9 Device No. :SZDSE-261- Prepared date:8-Apr-2009 Prepared by: Huang yongxin Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Page 4

EVERLIGHT ELECTRONICS CO.,LTD. 26-21SYGC/S530-E2/TR8 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 9 Device No. :SZDSE-261- Prepared date:8-Apr-2009 Prepared by: Huang yongxin Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA Operating Temperature IFP 60 mA Storage Temperature Pd 60 mW Electrostatic Discharge(HBM) ESD 2000 V Power Dissipation Topr -40 ~ +85 ℃ Peak Forward Current (Duty 1/10 @1KHz) Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 200 315 ----- mcd Viewing Angle 2θ1/2 ----- 30 ----- deg Peak Wavelength λp ----- 575 ----- nm Dominant Wavelength λd ----- 573 ----- nm Spectrum Radiation Bandwidth △λ ----- 20 ----- nm Forward Voltage VF 1.7 2.0 2.4 V IF=20mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Dominant Wavelength ±1nm

Page 5

EVERLIGHT ELECTRONICS CO.,LTD. 26-21SYGC/S530-E2/TR8 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 9 Device No. :SZDSE-261- Prepared date:8-Apr-2009 Prepared by: Huang yongxin Typical Electro-Optical Characteristics Curves

Page 6

EVERLIGHT ELECTRONICS CO.,LTD. 26-21SYGC/S530-E2/TR8 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 9 Device No. :SZDSE-261- Prepared date:8-Apr-2009 Prepared by: Huang yongxin Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm

Page 7

EVERLIGHT ELECTRONICS CO.,LTD. 26-21SYGC/S530-E2/TR8 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 9 Device No. :SZDSE-261- Prepared date:8-Apr-2009 Prepared by: Huang yongxin Carrier Tape Dimensions: Loaded quantity 1500 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Desiccant LabelAluminum moisture-proof bag

Page 8

EVERLIGHT ELECTRONICS CO.,LTD. 26-21SYGC/S530-E2/TR8 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 9 Device No. :SZDSE-261- Prepared date:8-Apr-2009 Prepared by: Huang yongxin Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260 ±5 ℃ ℃ Min. 5sec. 6 Min. 22 PCS. 0/1 2 Temperature Cycle H : +100 15min℃ ∫ 5 min L : -40 15min℃ 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100 5min℃ ∫ 10 sec L : -10 5min℃ 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85 / 85%RH℃ 1000 Hrs. 22 PCS. 0/1

Page 9

EVERLIGHT ELECTRONICS CO.,LTD. 26-21SYGC/S530-E2/TR8 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 9 Device No. :SZDSE-261- Prepared date:8-Apr-2009 Prepared by: Huang yongxin Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board.