Contact Us
SalesDept@heisener.com +86-755-83210559 ext. 811

ADM222ARZ-REEL

hotADM222ARZ-REEL

ADM222ARZ-REEL

For Reference Only

Part Number ADM222ARZ-REEL
Manufacturer Analog Devices Inc.
Description IC TXRX RS-232 18SOIC
Datasheet ADM222ARZ-REEL Datasheet
Package 18-SOIC (0.295", 7.50mm Width)
In Stock 2,576 piece(s)
Unit Price $ 2.0503 *
Lead Time Can Ship Immediately
Estimated Delivery Time Jun 5 - Jun 10 (Choose Expedited Shipping)
Request for Quotation

Part Number # ADM222ARZ-REEL (Interface - Drivers, Receivers, Transceivers) is manufactured by Analog Devices Inc. and distributed by Heisener. Being one of the leading electronics distributors, we carry many kinds of electronic components from some of the world’s top class manufacturers. Their quality is guaranteed by its stringent quality control to meet all required standards.

For ADM222ARZ-REEL specifications/configurations, quotation, lead time, payment terms of further enquiries please have no hesitation to contact us. To process your RFQ, please add ADM222ARZ-REEL with quantity into BOM. Heisener.com does NOT require any registration to request a quote of ADM222ARZ-REEL.

ADM222ARZ-REEL Specifications

ManufacturerAnalog Devices Inc.
CategoryIntegrated Circuits (ICs) - Interface - Drivers, Receivers, Transceivers
Datasheet ADM222ARZ-REELDatasheet
Package18-SOIC (0.295", 7.50mm Width)
Series-
TypeTransceiver
ProtocolRS232
Number of Drivers/Receivers2/2
DuplexFull
Receiver Hysteresis400mV
Data Rate200kbps
Voltage - Supply4.5 V ~ 5.5 V
Operating Temperature-40°C ~ 85°C
Mounting TypeSurface Mount
Package / Case18-SOIC (0.295", 7.50mm Width)
Supplier Device Package18-SOIC

ADM222ARZ-REEL Datasheet

Page 1

Page 2

REV. Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. a ADM222/ADM232A/ADM242 High-Speed, 5 V, 0.1 F CMOS RS-232 Drivers/Receivers FEATURES 200 kB/s Transmission Rate Small (0.1 F) Charge Pump Capacitors Single 5 V Power Supply Meets All EIA-232-E and V.28 Specifications Two Drivers and Two Receivers On-Board DC-DC Converters 9 V Output Swing with 5 V Supply 30 V Receiver Input Levels Pin Compatible with MAX222/MAX232A/MAX242 APPLICATIONS Computers Peripherals Modems Printers Instruments FUNCTIONAL BLOCK DIAGRAM * INTERNAL 400k PULL-UP RESISTOR ON EACH TTL/CMOS INPUT ** INTERNAL 5k PULL-DOWN RESISTOR ON EACH RS-232 INPUT +5V TO +10V VOLTAGE DOUBLER +5V TO –10V VOLTAGE INVERTER C1+ C1– V+ V– C2+ C2– T1 ADM2xx T2 R1 R2 0.1F 0.1F 0.1F GND TTL/CMOS OUTPUTS R1OUT R2OUT T1OUT T2OUT R1IN R2IN T1IN T2IN TTL/CMOS INPUTS* RS-232 OUTPUTS RS-232 INPUTS** 0.1F 5V INPUT 0.1F EN SHDN (ADM242) (ADM222, ADM242) VCC GENERAL DESCRIPTION The ADM222, ADM232A, ADM242 are a family of high-speed RS-232 line drivers/receivers offering transmission rates up to 200 kB/s. Operating from a single 5 V power supply, a highly efficient on-chip charge pump using small (0.1 µF) external capacitors allows RS-232 bipolar levels to be developed. Two RS-232 drivers and two RS-232 receivers are provided on each device. The devices are fabricated on BiCMOS, an advanced mixed technology process that combines low power CMOS with high- speed bipolar circuitry. This allows for transmission rates up to 200 kB/s, yet minimizes the quiescent power supply current to under 5 mA. The ADM232A is a pin-compatible, high-speed upgrade for the AD232 and for the ADM232L. It is available in 16-lead DIP and in both narrow and wide surface-mount (SOIC) packages. The ADM222 contains an additional shutdown (SHDN) func- tion that may be used to disable the device, thereby reducing the supply current to 0.1 µA. During shutdown, all transmit/receive functions are disabled. The ADM222 is available in 18-lead DIP and in a wide surface-mount (SOIC) package. The ADM242 combines both shutdown (SHDN) and enable (EN) functions. The shutdown function reduces the supply current to 0.1 mA. During shutdown, the transmitters are dis- abled but the receivers continue to operate normally. The enable function allows the receiver outputs to be disabled thereby facilitating sharing a common bus. The ADM242 is available in 18-lead DIP and in a wide surface-mount (SOIC) package. C One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 ©2016 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com Document Feedback

Page 3

REV.–2– ADM222/ADM232A/ADM242–SPECIFICATIONS (VCC = 5 V  10%. C1–C4 = 0.1 F; all spec- ifications TMIN to TMAX unless otherwise noted.) Parameter Min Typ Max Unit Test Conditions/Comments RS-232 TRANSMITTERS Output Voltage Swing ±5 ±9 V All Transmitter Outputs Loaded with 3 kΩ to Ground Input Logic Threshold Low, VINL 1.7 0.8 V TIN Input Logic Threshold High, VINH 2.4 1.7 V TIN Logic Pull-Up Current 12 40 µA TIN = 0 V Data Rate 200 kB/s Output Resistance 300 Ω VCC = V+ = V– = 0 V, VOUT = ±2 V Output Short Circuit Current (Instantaneous) ±10 mA RS-232 RECEIVERS RS-232 Input Voltage Range –30 +30 V RS-232 Input Threshold Low 0.8 1.2 V RS-232 Input Threshold High 1.6 2.4 V RS-232 Input Hysteresis 0.2 0.4 1.0 V VCC = 5 V RS-232 Input Resistance 3 5 7 kΩ TA = 0°C to 85°C TTL/CMOS Output Voltage Low, VOL 0.05 0.4 V IOUT = 3.2 mA TTL/CMOS Output Voltage High, VOH 3.5 V IOUT = –1.0 mA TTL/CMOS Output Short-Circuit Current –2 –85 mA Source Current (VOUT = GND)* TTL/CMOS Output Short-Circuit Current 10 35 mA Sink Current (VOUT = VCC)* TTL/CMOS Output Leakage Current ±0.05 ±10 µA SHDN = GND/EN = VCC 0 V ≤ VOUT ≤ VCC EN Input Threshold Low, VINL 1.4 0.8 V EN Input Threshold High, VINH 2.0 1.4 V POWER SUPPLY Power Supply Current 4 8 mA No Load 13 mA 3 kΩ Load on Both Outputs Shutdown Power Supply Current 0.1 10 µA SHDN Input Leakage Current ±1 µA SHDN Input Threshold Low, VINL 1.4 0.8 V SHDN Input Threshold High, VINH 2.0 1.4 V AC CHARACTERISTICS Transition Region Slew Rate 3 8 30 V/µs CL = 50 pF to 1000 pF, RL = 3 kΩ to 7 kΩ Measured from +3 V to –3 V or –3 V to +3 V Transmitter Propagation Delay TTL to RS-232 0.85 3.5 µs tPHLT 1.0 3.5 µs tPLHT Receiver Propagation Delay RS-232 to TTL 0.1 0.5 µs tPHLR 0.3 0.5 µs tPLHR Receiver Output Enable Time 125 500 ns tER Receiver Output Disable Time 160 500 ns tDR Transmitter Output Enable Time 250 µs SHDN Goes High Transmitter Output Disable Time 3.5 µs SHDN Goes Low Transmitter + to – Propagation Delay Difference 150 ns Receiver + to – Propagation Delay Difference 200 ns *Guaranteed by design, not production tested. Specifications subject to change without notice. C

Page 4

REV. ADM222/ADM232A/ADM242 –3– ABSOLUTE MAXIMUM RATINGS* (TA = 25°C unless otherwise noted) VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 V V+ . . . . . . . . . . . . . . . . . . . . . . . . . . . (VCC – 0.3 V) to +13 V V– . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +0.3 V to –13 V Input Voltages TIN . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to (VCC + 0.3 V) RIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±30 V Output Voltages TOUT . . . . . . . . . . . . . . . . . . . (V+, +0.3 V) to (V–, –0.3 V) ROUT . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to (VCC + 0.3 V) Short Circuit Duration TOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Continuous Power Dissipation N-16 . . . . . . . . . . . . . . . . . . . . . . 400 mW (Derate 7.5 mW/°C above 70°C) θJA, Thermal Impedance . . . . . . . . . . . . . . . . . . . . 80°C/W Power Dissipation R-16N . . . . . . . . . . . . . . . . . . . . . 400 mW (Derate 7 mW/°C above 70°C) θJA, Thermal Impedance . . . . . . . . . . . . . . . . . . . . 80°C/W Power Dissipation R-16W . . . . . . . . . . . . . . . . . . . . . 400 mW (Derate 7 mW/°C above 70°C) θJA, Thermal Impedance . . . . . . . . . . . . . . . . . . . . 80°CW Power Dissipation N-18 . . . . . . . . . . . . . . . . . . . . . . 400 mW (Derate 7 mW/°C above 70°C) θJA, Thermal Impedance . . . . . . . . . . . . . . . . . . . . 80°C/W Power Dissipation R-18W . . . . . . . . . . . . . . . . . . . . . 400 mW (Derate 7 mW/°C above 70°C) θJA, Thermal Impedance . . . . . . . . . . . . . . . . . . . . 80°C/W Operating Temperature Range Industrial (A Version) . . . . . . . . . . . . . . . –40°C to +85°C Storage Temperature Range . . . . . . . . . . . . –65°C to +150°C Lead Temperature (Soldering, 10 sec) . . . . . . . . . . . . 300°C Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . . 215°C Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°C *This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operation sections of this specifica- tion is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. Test Circuits V– V+ 0V VOUT 3V VIN tPHLT tPLHT Figure 1. Transmitter Propagation Delay Timing 0.8V 3V 3.5V RECEIVER OUTPUT EN INPUT 0V tER Figure 2. Receiver Enable Timing tPHLR tPLHR GND VCC 50% VIN VOUT 3V 0V Figure 3. Receiver Propagation Delay Timing VOH – 0.5V RECEIVER OUTPUT EN INPUT VOL + 0.5V VOH VOL 0V 3V tDR Figure 4. Receiver Disable Timing C

Page 5

ADM222/ADM232A/ADM242 –4– VIN VOUT 50pF3k SHDN Figure 5. Shutdown Test Circuit + 5V TRANSMITTER OUTPUT SHDN INPUT – 5V V+ 0V 3V V– tDT Figure 6. Transmitter Shutdown Disable Timing 2 4 6 5 12 11 13 10 3 7 15 8 14 9 18 * INTERNAL 400k PULL-UP RESISTOR ON EACH TTL/CMOS INPUT ** INTERNAL 5k PULL-DOWN RESISTOR ON EACH RS-232 INPUT +5V TO +10V VOLTAGE DOUBLER +5V TO –10V VOLTAGE INVERTER C1+ C1– V+ V– C2+ C2– T1 ADM222 T2 R1 R2 C1 0.1F C2 0.1F C3 0.1F GND TTL/CMOS OUTPUTS R1OUT R2OUT T1OUT T2OUT R1IN R2IN T1IN T2IN TTL/CMOS INPUTS* RS-232 OUTPUTS RS-232 INPUTS** 5V INPUT C5 0.1F 6.3V SHDN 16 C4 0.1F VCC 17 Figure 7. ADM222 Typical Operating Circuit PIN FUNCTION DESCRIPTION Mnemonic Function VCC Power Supply Input, 5 V ± 10%. V+ Internally generated positive supply (+10 V nominal). V– Internally generated negative supply (–10 V nominal). GND Ground Pin. Must be connected to 0 V. C1+ External capacitor 1, (+ terminal) is connected to this pin. C1– External capacitor 1, (– terminal) is connected to this pin. C2+ External capacitor 2, (+ terminal) is connected to this pin. C2– External capacitor 2, (– terminal) is connected to this pin. TIN Transmitter (Driver) Inputs. These inputs accept TTL/CMOS levels. An internal 400 kΩ pull-up resistor to VCC is connected on each input. TOUT Transmitter (Driver) Outputs. These are RS-232 levels (typically ±9 V). RIN Receiver Inputs. These inputs accept RS-232 signal levels. An internal 5 kΩ pull-down resistor to GND is connected on each of these inputs. ROUT Receiver Outputs. These are TTL/CMOS levels. NC No Connect. No connections are required to this pin. EN (ADM242 Only) Active Low Digital Input. May be used to enable or disable (three-state) both receiver outputs. SHDN (ADM222 and ADM242) Active Low Digital Input. May be used to disable the device so that the power consumption is minimized. On the ADM222 all drivers and receivers are disabled. On the ADM242 the drivers are disabled but the receivers remain enabled. 18 17 16 15 14 13 12 11 10 1 2 3 4 5 6 7 8 9 TOP VIEW (Not to Scale) ADM222 NC = NO CONNECT R2IN T2OUT NC C1+ V+ C1– V– C2– C2+ T2IN SHDN VCC GND T1OUT T1IN R1OUT R1IN R2OUT Figure 8. ADM222 DIP and SOIC Pin Configurations REV. C

Page 6

REV. ADM222/ADM232A/ADM242 –5– TOP VIEW (Not to Scale) 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 C1+ V+ C1– C2+ C2– V– T2OUT R2IN VCC GND T1OUT R1IN R1OUT T1IN T2IN R2OUT ADM232A Figure 9. ADM232A DIP/SOIC Pin Configuration 1 3 5 4 11 10 12 9 2 6 14 7 13 8 * INTERNAL 400k PULL-UP RESISTOR ON EACH TTL/CMOS INPUT ** INTERNAL 5k PULL-DOWN RESISTOR ON EACH RS-232 INPUT +5V TO +10V VOLTAGE DOUBLER +5V TO –10V VOLTAGE INVERTER C1+ C1– V+ V– C2+ C2– T1 ADM232A T2 R1 R2 C1 0.1F C2 0.1F C3 0.1F GND TTL/CMOS OUTPUTS R1OUT R2OUT T1OUT T2OUT R1IN R2IN T1IN T2IN TTL/CMOS INPUTS* RS-232 OUTPUTS RS-232 INPUTS** 5V INPUT C5 0.1F 6.3V 15 C4 0.1F VCC 16 Figure 10. ADM232A Typical Operating Circuit 18 17 16 15 14 13 12 11 10 1 2 3 4 5 6 7 8 9 TOP VIEW (Not to Scale) ADM242 R2IN T2OUT EN C1+ V+ C1– V– C2– C2+ T2IN SHDN VCC GND T1OUT T1IN R1OUT R1IN R2OUT Figure 11. ADM242 DIP/SOIC Pin Configuration 2 4 6 5 12 11 13 10 3 7 8 14 9 18 * INTERNAL 400k PULL-UP RESISTOR ON EACH TTL/CMOS INPUT ** INTERNAL 5k PULL-DOWN RESISTOR ON EACH RS-232 INPUT +5V TO +10V VOLTAGE DOUBLER +5V TO –10V VOLTAGE INVERTER C1+ C1– V+ V– C2+ C2– T1 ADM242 T2 R1 R2 C1 0.1F C2 0.1F C3 0.1F GND TTL/CMOS OUTPUTS R1OUT R2OUT T1OUT T2OUT R1IN R2IN T1IN T2IN TTL/CMOS INPUTS* RS-232 OUTPUTS RS-232 INPUTS** 5V INPUT C5 0.1F 6.3V 16 C4 0.1F VCC EN SHDN 15 17 1 Figure 12. ADM242 Typical Operating Circuit C

Page 7

ADM222/ADM232A/ADM242 –6– –Typical Performance Characteristics LOAD CURRENT – mA –15 0 5 V + , V – – V 10 15 20 25 30 –10 –5 0 5 10 15 V+ V– TPC 1. Charge Pump V+, V– vs. Current LOAD CAPACITANCE – pF –9 0 500 T R A N S M IT T E R O U T P U T V O L T A G E – V –7 –5 5 1000 1500 2000 2500 3000 115kBps 230kBps 460kBps –3 –1 7 9 3 1 TPC 2. Transmitter Baud Rate vs. Load Capacitance T CH1 10.0V CH2 5.00V M 1.00s CH2 –6.4V : 6.2V : 140ns @: –3.5V T TPC 3. Transmitter Unloaded Slew Rate LOAD CURRENT – mA –15 0 2 T x O /P V O L T A G E – V 4 6 8 10 12 –10 –5 0 5 10 15 14 Tx O/P HI Tx O/P LO TPC 4. Transmitter Output Voltage vs. Current 10 90 100 0% 0.010V 100s A4 5V 5V TPC 5. Charge Pump V+, V– Exiting Shutdown T CH1 10.0V CH2 5.00V M 1.00s CH2 –6.4V : 6.0V : 600ns @: –2.9V T TPC 6. Transmitter Fully Loaded Slew Rate REV. C 230kbps 115kbps 460kbps

Page 8

REV. ADM222/ADM232A/ADM242 –7– GENERAL INFORMATION The ADM222/ADM232A/ADM242 are high-speed RS-232 drivers/receivers requiring a single digital 5 V supply. The RS-232 standard requires transmitters that will deliver ±5 V minimum on the transmission channel and receivers that can accept signal levels down to ±3 V. The parts achieve this by integrating step- up voltage converters and level-shifting transmitters and receivers onto the same chip. CMOS technology is used to keep the power dissipation to an absolute minimum. All devices con- tain an internal charge pump voltage doubler and a voltage inverter that generates ± 10 V from the 5 V input. Four exter- nal 0.1 µF capacitors are required for the internal charge pump voltage converter. The ADM222/ADM232A/ADM242 is a modification, enhance- ment and improvement to the AD230-AD241 family and derivatives thereof. It is essentially plug-in-compatible and does not have materially different applications. CIRCUIT DESCRIPTION The internal circuitry consists of four main sections. These are: Charge Pump Voltage Converter TTL/CMOS to RS-232 Transmitters RS-232 to TTL/CMOS Receivers Enable and Shutdown Functions. Charge Pump DC-DC Voltage Converter The Charge Pump Voltage converter consists of an oscillator and a switching matrix. The converter generates a ±10 V supply from the input 5 V level. This is done in two stages using a switched capacitor technique. The 5 V input supply is doubled to 10 V using capacitor C1 as the charge storage element. The –10 V level is also generated from the input 5 V supply using C1 and C2 as the storage elements. Capacitors C3 and C4 are used to reduce the output ripple. Their values are not critical and can be reduced if higher levels of ripple are acceptable. The charge pump capacitors C1 and C2 may also be reduced at the expense of higher output imped- ance on the V+ and V– supplies. The V+ and V– supplies may also be used to power external circuitry if the current requirements are small. Please refer to the typical performance characteristics which shows the V+, V– output voltage vs. current. In the shutdown mode the charge pump is disabled and V+ decays to VCC while V– decays to 0 V. Transmitter (Driver) Section The Drivers convert TTL/CMOS input levels into RS-232 output levels. With VCC = 5 V and driving a typical RS-232 load, the output voltage swing is ±9 V. Even under worst-case conditions the drivers are guaranteed to meet the ±5 V RS-232 minimum requirement. The input threshold levels are both TTL- and CMOS-compat- ible with the switching threshold set at VCC/4. With a nominal VCC = 5 V, the switching threshold is 1.25 V typical. Unused inputs may be left unconnected, as an internal 400 kΩ pull-up resistor pulls them high forcing the outputs into a low state. As required by the RS-232 standard, the slew rate is limited to less than 30 V/µs without the need for an external slew limiting capacitor, and the output impedance in the power-off state is greater than 300 Ω. Receiver Section The receivers are inverting level-shifters that accept RS-232 input levels (±3 V to ±15 V) and translate them into 5 V TTL/ CMOS levels. The inputs have internal 5 kΩ pull-down resistors to ground and are also protected against overvoltages of up to ± 30 V. The guaranteed switching thresholds are 0.8 V mini- mum and 2.4 V maximum, which are well within the ± 3 V RS-232 requirement. The low level threshold is deliberately positive as it ensures that an unconnected input will be inter- preted as a low level. The receivers have Schmitt trigger input with a hysteresis level of 0.5 V. This ensures error-free reception for both noisy inputs and for inputs with slow transition times Enable and Shutdown Functions On the ADM222, both receivers are fully disabled during shutdown. On the ADM242, both receivers continue to operate normally. This function is useful for monitoring activity so that when it occurs, the device can be taken out of the shutdown mode. The ADM242 also contains a receiver enable function (EN) which can be used to fully disable the receivers, independent of SHDN. APPLICATIONS INFORMATION A selection of typical operating circuits is shown in TPCs 1–6 and Figure 13. 10 90 100 0% 5V A1 5s 2.0V 5V Figure 13. Transmitter Output Disable Timing C

Page 9

ADM222/ADM232A/ADM242 Data Sheet Rev. C | Page 10 of 11 OUTLINE DIMENSIONS COMPLIANT TO JEDEC STANDARDS MS-001-BB 0.022 0.018 0.015 0.150 0.130 0.115 0.070 0.060 0.055 0.021 0.016 0.0110.045 0.039 0.030 0.195 0.130 0.115 16 1 8 9 0.100 BSC 0.775 0.755 0.735 0.210 MAX 0.015 MIN 0.280 0.250 0.240 0.430 MAX 0.012 0.010 0.008 0.325 0.310 0.300 0.015 GAUGE PLANE 03 -0 7- 2 01 4 -D SEATING PLANE TOP VIEW SIDE VIEW END VIEW PIN 1 INDICATOR Figure 14. 16-Lead Plastic Dual In-Line Package [PDIP] Narrow Body (N-16) Dimensions shown in inches CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. COMPLIANT TO JEDEC STANDARDS MS-013-AA 10.50 (0.4134) 10.10 (0.3976) 0.30 (0.0118) 0.10 (0.0039) 2.65 (0.1043) 2.35 (0.0925) 10.65 (0.4193) 10.00 (0.3937) 7.60 (0.2992) 7.40 (0.2913) 0.75 (0.0295) 0.25 (0.0098) 45° 1.27 (0.0500) 0.40 (0.0157) COPLANARITY 0.10 0.33 (0.0130) 0.20 (0.0079) 0.51 (0.0201) 0.31 (0.0122) SEATING PLANE 8° 0° 16 9 8 1 1.27 (0.0500) BSC 03 -2 7- 20 07 -B Figure 15. 16-Lead Standard Small Outline Package [SOIC_W] Wide Body (RW-16) Dimensions shown in millimeters and (inches)

Page 10

Data Sheet ADM222/ADM232A/ADM242 Rev. C | Page 11 of 11 CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. COMPLIANT TO JEDEC STANDARDS MS-012-AC 10.00 (0.3937) 9.80 (0.3858) 16 9 8 1 6.20 (0.2441) 5.80 (0.2283) 4.00 (0.1575) 3.80 (0.1496) 1.27 (0.0500) BSC SEATING PLANE 0.25 (0.0098) 0.10 (0.0039) 0.51 (0.0201) 0.31 (0.0122) 1.75 (0.0689) 1.35 (0.0531) 0.50 (0.0197) 0.25 (0.0098) 1.27 (0.0500) 0.40 (0.0157) 0.25 (0.0098) 0.17 (0.0067) COPLANARITY 0.10 8° 0° 0 60 60 6 -A 45° Figure 16. 16-Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-16) Dimensions shown in millimeters and (inches) CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. COMPLIANT TO JEDEC STANDARDS MS-013-AB 0.30 (0.0118) 0.10 (0.0039) 2.65 (0.1043) 2.35 (0.0925) 10.65 (0.4193) 10.00 (0.3937) 7.60 (0.2992) 7.40 (0.2913) 0.75 (0.0295) 0.25 (0.0098) 1.27 (0.0500) 0.40 (0.0157) COPLANARITY 0.10 0.33 (0.0130) 0.20 (0.0079) 0.51 (0.0201) 0.31 (0.0122) SEATING PLANE 8° 0° 18 10 9 1 1.27 (0.0500) BSC 11.75 (0.4626) 11.35 (0.4469) 0 6 07 0 6- A 45° Figure 17. 18-Lead Standard Small Outline Package [SOIC_W] Wide Body (RW-18) Dimensions shown in millimeters and (inches)

ADM222ARZ-REEL Reviews

Average User Rating
5 / 5 (74)
★ ★ ★ ★ ★
5 ★
67
4 ★
7
3 ★
0
2 ★
0
1 ★
0

Write a Review

Not Rated
Thanks for Your Review!

Bens*****arquez

May 30, 2020

Thousands of in stock parts with low cost shipping and standard quality.

Leon*****ichael

May 28, 2020

Tested one of them and works good.

Cal*****Batta

May 13, 2020

It works fine and does what it has designed for. No regrets.

Emi*****Nagi

May 12, 2020

Quality made product satisfied with my purchase. Thanks.

Brynl*****nford

May 4, 2020

I bought this for myself, and liked it so much. I also bought one for a friend.

Dimit*****exander

May 1, 2020

The specs range is wide for a selection and the customer service is great.

Have*****rekh

April 27, 2020

Worked good to turn my AC welder into a DC welder.

Octav*****ennan

April 25, 2020

Perfect, functional, arrived a weeks earlier, excellent Seller. Recommended

Osc*****Modi

April 22, 2020

Resonators were genuine Murata components and arrived in 3 days from Hongkong

Elie*****Sharp

April 20, 2020

Great kit, cost half the price of other stores. Includes most items that someone would need.

ADM222ARZ-REEL Guarantees

Service Guarantee

Service Guarantees

We guarantee 100% customer satisfaction.

Our experienced sales team and tech support team back our services to satisfy all our customers.

Quality Guarantee

Quality Guarantees

We provide 90 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.

ADM222ARZ-REEL Packaging

Verify Products
Customized Labels
Professional Packaging
Sealing
Packing
Insepction

ADM222ARZ-REEL Related Products

2220J5000271MXR 2220J5000271MXR Knowles Syfer, CAP CER 2220, 2220 (5750 Metric), - View
1808J0630391JDT 1808J0630391JDT Knowles Syfer, CAP CER 390PF 63V X7R 1808, 1808 (4520 Metric), - View
CZRU52C3V9 CZRU52C3V9 Comchip Technology, DIODE ZENER 3.9V 150MW 0603, 2-SMD, No Lead, - View
71V35761SA200BGI8 71V35761SA200BGI8 IDT, Integrated Device Technology Inc, IC SRAM 4.5MBIT 200MHZ 119BGA, 119-BGA, - View
hotLFE2-70SE-5FN672C LFE2-70SE-5FN672C Lattice Semiconductor Corporation, IC FPGA 500 I/O 672FBGA, 672-BBGA, - View
hotTC6501P120VCTTR TC6501P120VCTTR Microchip Technology, IC TEMP SWITCH OD 120C SOT23-5, SC-74A, SOT-753, - View
RWR84N1400FRBSL RWR84N1400FRBSL Vishay Dale, RES 140 OHM 7W 1% WW AXIAL, Axial, - View
RW0S6BB5R00FE RW0S6BB5R00FE Ohmite, RES SMD 5 OHM 1% 0.6W 2010, 2010 (5025 Metric), - View
RV1206FR-07210KL RV1206FR-07210KL Yageo, RES SMD 210K OHM 1% 1/4W 1206, 1206 (3216 Metric), - View
37-0501-21 37-0501-21 Aries Electronics, CONN SOCKET SIP 37POS GOLD, -, - View
EJH-108-01-F-D-RA-12 EJH-108-01-F-D-RA-12 Samtec Inc., .100 X .100 EJECTOR HEADER ASSEM, -, - View
PLA1G121J04 PLA1G121J04 ITT Cannon, LLC, CIRCULAR, -, - View
Payment Methods
Delivery Services

Quick Inquiry

ADM222ARZ-REEL

Certified Quality

Heisener's commitment to quality has shaped our processes for sourcing, testing, shipping, and every step in between. This foundation underlies each component we sell.

ISO9001:2015, ICAS, IAF, UKAS

View the Certificates

Do you have any question about ADM222ARZ-REEL?

+86-755-83210559 ext. 811 SalesDept@heisener.com heisener007 2354944915 Send Message

ADM222ARZ-REEL Tags

  • ADM222ARZ-REEL
  • ADM222ARZ-REEL PDF
  • ADM222ARZ-REEL datasheet
  • ADM222ARZ-REEL specification
  • ADM222ARZ-REEL image
  • Analog Devices Inc.
  • Analog Devices Inc. ADM222ARZ-REEL
  • buy ADM222ARZ-REEL
  • ADM222ARZ-REEL price
  • ADM222ARZ-REEL distributor
  • ADM222ARZ-REEL supplier
  • ADM222ARZ-REEL wholesales

ADM222ARZ-REEL is Available in