Contact Us
SalesDept@heisener.com +86-755-83210559 ext. 811

AP1117D25G-13

hotAP1117D25G-13

AP1117D25G-13

For Reference Only

Part Number AP1117D25G-13
Manufacturer Diodes Incorporated
Description IC REG LINEAR 2.5V 1A TO252-3
Datasheet AP1117D25G-13 Datasheet
Package TO-252-3, DPak (2 Leads + Tab), SC-63
In Stock 5,000 piece(s)
Unit Price Request a Quote
Lead Time Can Ship Immediately
Estimated Delivery Time Aug 9 - Aug 14 (Choose Expedited Shipping)
Request for Quotation

Part Number # AP1117D25G-13 (PMIC - Voltage Regulators - Linear) is manufactured by Diodes Incorporated and distributed by Heisener. Being one of the leading electronics distributors, we carry many kinds of electronic components from some of the world’s top class manufacturers. Their quality is guaranteed by its stringent quality control to meet all required standards.

For AP1117D25G-13 specifications/configurations, quotation, lead time, payment terms of further enquiries please have no hesitation to contact us. To process your RFQ, please add AP1117D25G-13 with quantity into BOM. Heisener.com does NOT require any registration to request a quote of AP1117D25G-13.

AP1117D25G-13 Specifications

ManufacturerDiodes Incorporated
CategoryIntegrated Circuits (ICs) - PMIC - Voltage Regulators - Linear
Datasheet AP1117D25G-13Datasheet
PackageTO-252-3, DPak (2 Leads + Tab), SC-63
Series-
Output ConfigurationPositive
Output TypeFixed
Number of Regulators1
Voltage - Input (Max)18V
Voltage - Output (Min/Fixed)2.5V
Voltage - Output (Max)-
Voltage Dropout (Max)1.4V @ 1A
Current - Output1A
Current - Quiescent (Iq)-
Current - Supply (Max)10mA
PSRR60dB (180Hz)
Control Features-
Protection FeaturesOver Current, Over Temperature
Operating Temperature-20°C ~ 125°C
Mounting TypeSurface Mount
Package / CaseTO-252-3, DPak (2 Leads + Tab), SC-63
Supplier Device PackageTO-252-3

AP1117D25G-13 Datasheet

Page 1

Page 2

AP1117/AP1117I Document number: DS31009 Rev. 23 - 2 1 of 13 www.diodes.com June 2013 © Diodes Incorporated AP1117/AP1117I 1A DROPOUT POSITIVE ADJUSTABLE OR FIXED-MODE REGULATOR Description AP1117 is a low dropout positive adjustable or fixed-mode regulator with 1A output current capability. The product is voltage specifically designed to provide well-regulated supply for low IC applications such as high-speed bus termination and low current 3.3V logic supply. AP1117 is also well suited for other applications such as VGA cards. AP1117 is guaranteed to have lower than 1.4V dropout at full load current making it ideal to provide well-regulated outputs of 1.25 to 5.0 with 6.4V to 18V input supply. AP1117 is available both in commercial temperature grade (AP1117) and in industrial temperature range (AP1117I) (TO252 and SOT223). Features  1.4V Maximum Dropout at Full Load Current  Fast Transient Response  Output Current Limiting  Built-in Thermal Shutdown  Good Noise Rejection  3-Terminal Adjustable or Fixed 1.5V, 1.8V,2.5V, 3.3V, 5.0V  Operating Junction Temperature range  0°C ≤ TJ ≤ +125°C (All packages)  -20°C ≤ TJ ≤ +125°C (see ordering information)  -40°C ≤ TJ ≤ +125°C (see ordering information)  Lead-Free Packages: SOT223, TO252, SOT89-3, TO263 and TO220-3  Totally Lead-Free; RoHS Compliant (Notes 1 & 2)  SOT223, TO252, SOT89-3, TO263 and TO220-3: Available in “Green” Molding Compound (No Br, Sb)  Halogen and Antimony Free. “Green” Device (Note 3) Applications  PC Peripheral  Communication  Consumer Equipment Pin Assignments SOT89-3 Adj (GND) VOUT VIN 1 3 2 Tab is VOUT ( Top View ) SOT223 VIN VOUT Adj (GND) Tab is VOUT ( Top View ) 3 2 1 TO220-3 Tab is VOUT 3 VIN 2 1 VOUT Adj (GND) ( Front View ) TO252 and TO263 3 2 1 VIN VOUT Tab is VOUT ( Top View ) Adj (GND) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen and Antimony free, "Green" and Lead-Free. 3. Halogen and Antimony free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds.

Page 3

AP1117/AP1117I Document number: DS31009 Rev. 23 - 2 2 of 13 www.diodes.com June 2013 © Diodes Incorporated AP1117/AP1117I Typical Applications Circuit ( 5V/3.3V fixed output ) ( 5V/2.5V ADJ output ) ) R R (1 VV 1 2 REFo  Ω Ω Pin Descriptions Pin Number I/O Pin Name Function 1 I Adj (GND) A resistor divider from this pin to the VOUT pin and ground sets the output voltage (Ground only for Fixed-Mode). 2 O VOUT The output of the regulator. A minimum of 4.7µF capacitor (0.15Ω ≤ ESR ≤ 0.5Ω) must be connected from this pin to ground to insure stability. 3 I VIN The input pin of regulator. Typically a large storage capacitor is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response. This pin must always be 1.3V higher than VOUT in order for the device to regulate properly. A minimum of 4.7µF capacitor (0.15Ω ≤ ESR ≤0.5Ω) must be connected from this pin to ground to insure stability. Functional Block Diagram 3 Thermal Shutdown 1 2 VOUT Adj 1.25V + + CURRENT LIMIT VIN - + + 1 GND (FIXED) -

Page 4

AP1117/AP1117I Document number: DS31009 Rev. 23 - 2 3 of 13 www.diodes.com June 2013 © Diodes Incorporated AP1117/AP1117I Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.) Symbol Parameter Rating Unit VIN DC Supply Voltage -0.3 to +18 V TMJ Maximum Junction Temperature +150 °C PD Power Dissipation SOT89-3 SOT223 TO220-3 TO252 TO263 Internally limited by maximum junction temperature of +150°C (Note 4) mW TST Storage Temperature -65 to +150 °C Notes: 4. AP1117 contains an internal thermal limiting circuit that is designed to protect the regulator in the event that the maximum junction temperature exceeded. When activated, typically at +150°C, the regulator output switches off and then back on as the die cools. Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.) Symbol Parameter Min Max Unit TOP Operating Junction Temperature Range AP1117 0 +125 °C AP1117I -40 +125 Note: 11. 22uF is suggested for Cin/Cout value when application is required to work under 0℃. Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Parameter Conditions Min Typ Max Unit Reference Voltage AP1117-ADJ TA = +25°C, (VIN-OUT) = 1.5V IO = 10mA 1.225 1.250 1.275 V Output Voltage AP1117-1.5 IOUT = 10mA, TA = +25°C, 3V ≤ VIN ≤ 12V 1.470 1.500 1.530 V AP1117-1.8 IOUT = 10mA, TA = +25°C, 3.3V ≤ VIN ≤ 12V 1.764 1.800 1.836 V AP1117-2.5 IOUT = 10mA, TA = +25°C, 4V ≤ VIN ≤ 12V 2.450 2.500 2.550 V AP1117-3.3 IOUT = 10mA, TA = +25°C, 4.8V ≤ VIN ≤ 12V 3.235 3.300 3.365 V AP1117-5.0 IOUT = 10mA, TA = +25°C, 6.5V ≤ VIN ≤ 12V 4.900 5.000 5.100 V Line Regulation AP1117-XXX IO = 10mA,VOUT +1.5V < VIN < 12V, TA = 25°C — — 0.2 % Load Regulation AP1117-ADJ VIN = 3.3V,VADJ = 0, 0mA < IO < 1A, TA = +25°C (Notes 5, 6) — — 1 % AP1117-1.5 VIN = 3V, 0mA < IO < 1A, TA = +25°C (Notes 5, 6) — 12 15 mV AP1117-1.8 VIN = 3.3V, 0mA < IO < 1A, TA = +25°C (Notes 5, 6) — 15 18 mV AP1117-2.5 VIN = 4V, 0mA < IO < 1A, TA = +25°C (Notes 5, 6) — 20 25 mV Notes: 5. See thermal regulation specifications for changes in output voltage due to heating effects. Line and load regulation are measured at a constant junction temperature by low duty cycle pulse testing. Load regulation is measured at the output lead = 1/18” from the package. 6. Line and load regulation are guaranteed up to the maximum power dissipation of 15W. Power dissipation is determined by the difference between input and output differential and the output current. Guaranteed maximum power dissipation will not be available over the full input/output range.

Page 5

AP1117/AP1117I Document number: DS31009 Rev. 23 - 2 4 of 13 www.diodes.com June 2013 © Diodes Incorporated AP1117/AP1117I Electrical Characteristics (cont.) (@TA = +25°C, unless otherwise specified.) Parameter Conditions Min Typ Max Unit Load Regulation (cont.) AP1117-3.3 VIN = 5V, 0 ≤ IOUT ≤ 1A, TA = +25°C (Notes 5, 6) — 26 33 mV AP1117-5.0 VIN = 8V, 0 ≤ IOUT ≤ 1A, TA = +25°C (Notes 5, 6) — 40 50 mV Dropout Voltage (VIN-VOUT) AP1117-ADJ/1.5/1.8 2.5/3.3/5.0 IOUT = 800mA, VOUT = 1% VOUT 0°C ≤ TJ ≤ +125°C — 1.2 1.3 V Dropout Voltage (VIN-VOUT) AP1117-ADJ/1.5/1.8 2.5/3.3/5.0 IOUT = 1A, VOUT = 1% VOUT 0°C ≤ TJ ≤ +125°C — 1.3 1.4 V AP1117I-ADJ/1.5/1.8 2.5/3.3/5.0 -40°C ≤ TJ ≤ +125°C Current Limit AP1117-ADJ/1.5/1.8 2.5/3.3/5.0 (VIN-VOUT) = 5V 1. 1 — — A Minimum Load Current (Note 7) AP1117-XXX 0°C ≤ TJ ≤ +125°C — 5 10 mA Thermal Regulation TA = +25°C, 30ms pulse — 0.008 0.040 %/W Ripple Rejection F = 180Hz, COUT = 25µF Tantalum, IOUT = 1A — — — — AP1117-XXX VIN = VOUT +3V — 60 70 dB Temperature Stability IO = 10mA — 0.5 — % θJA Thermal Resistance Junction-to-Ambient θJA SOT89-3: Control Circuitry/Power Transistor (Note 8) SOT223: Control Circuitry/Power Transistor (Note 9) TO252: Control Circuitry/Power Transistor (Note 8) TO220-3: Control Circuitry/Power Transistor (Note 8) TO263: Control Circuitry/Power Transistor (Note 8) — — — — — 164 107 73 78 60 — — — — — °C/W θJC Thermal Resistance Junction-to-Case SOT89-3: Control Circuitry/Power Transistor (Note 8) SOT223: Control Circuitry/Power Transistor (Note 9) TO252: Control Circuitry/Power Transistor (Note 8) TO220-3: Control Circuitry/Power Transistor (Note 8) TO263: Control Circuitry/Power Transistor (Note 8) — — — — — 42 15 12 3.5 3.5 — — — — — °C/W Notes: 7. Quiescent current is defined as the minimum output current required in maintaining regulation. At 12V input/output differential the device is guaranteed to regulate if the output current is greater than 10mA. 8. Test conditions for SOT89-3, TO220-3, TO252 and TO263: Devices mounted on FR-4 substrate, single sided PC board, 2oz copper,with minimum recommended pad layout, no air flow. The case point of θJC is located on the thermal tab. 9. Test conditions for SOT223: Devices mounted on FR-4 substrate, single sided PC board, 2oz copper, with 5mm x 5mm thermal pad layout, no air flow. The case point of θJC is located on the thermal tab.

Page 6

AP1117/AP1117I Document number: DS31009 Rev. 23 - 2 5 of 13 www.diodes.com June 2013 © Diodes Incorporated AP1117/AP1117I Typical Performance Characteristics 0 2.0 0 250 500 750 1000 OUTPUT CURRENT (mA) Dropout Voltage vs. Output Current 1.8 1.6 1.4 1.2 1.0 0.8 0.2 0.4 0.6 D R O P O U T V O LT A G E ( V ) T = 25°CJ T = 125°CJ -40 0 25 50 75 100 125 I = 800mALOAD TEMPERATURE (°C) Load Regulation vs. Temperature 0.20 0 -0.20 -0.40 -0.80 -1 O U T P U T V O LT A G E D E V IA T IO N ( % ) -40 -25 0 25 50 75 100 125 150 2 TEMPERATURE (°C) Percent Change in Output Voltage vs. Temperature 1.5 1 0.5 0 -0.5 -1 -2 -1.5O U T P U T V O LT A G E C H A N G E ( % ) 0.8 1 2 4 6 8 10 12 INPUT VOLTAGE (V) Line Regulation 0.6 0.4 0.2 0 O U T P U T V O LT A G E D E V IA T IO N ( % ) 7.5 0 20 40 60 80 100 120 140 160 180 200 C = 1µF C = 10µF Tantalum IN OUT TIME (µs) Line Transient Response 6.5 5.5 40 20 0 -20 -40 O U T P U T V O LT A G E D E V IA T IO N ( m V ) IN P U T V O LT A G E ( V ) 0 10 20 30 40 50 60 70 80 90 100 -1 0 1 2 -20 -10 0 10 20 30 C = 1µF C = 10µF Tantalum Preload = 100mA IN OUT TIME (µs) Load Transient Response L O A D C U R R E N T ( A ) O U T P U T V O LT A G E D E V IA T IO N ( m V )

Page 7

AP1117/AP1117I Document number: DS31009 Rev. 23 - 2 6 of 13 www.diodes.com June 2013 © Diodes Incorporated AP1117/AP1117I Application Information Load Regulation For improved load regulation the AP1117-ADJ should have the upper feedback resistor, R1, connected as close as possible to VOUT and the lower resistor, R2, connected as close as possible to the load GND return. This helps reduce any parasitic resistance in series with the load. Stability and Decoupling Capacitors Input Capacitors To ensure stable operation, the input supply must be low impedance up to a frequency of a few MHz. This requires a closely placed input decoupling capacitor of 4.7µF minimum. This can be either ceramic or solid tantalum. The ESR of this capacitor must be less than 0.5Ω. Output Capacitor The AP1117 also requires a closely placed output capacitor as part of the device frequency compensation. As part of its improved performance over industry standard 1117, the AP1117 is suitable for use with MLCC (Multi-Layer Ceramic Chip) capacitors. A minimum output capacitor of 4.7µF ceramic X7R or 4.7µF solid tantalum is required. Aluminum electrolytic can be used but a minimum of 47µF is required. When using Aluminum electrolytic it is still recommended to also use a 1µF MLCC in parallel. The ESR of the output capacitors must be less than 0.5Ω. The AP1117 is stable when using the correct value of MLCC capacitors. When using MLCC capacitors X7R dielectric is recommended. Do not use Y5V dielectrics. Capacitor Track Length Both input and output capacitors must be placed close to the AP1117. PCB traces not longer than 10mm are recommended between the AP1117 and the capacitors. Thermal Considerations Thermal protection circuitry will shut down the regulator should the junction temperature exceed typically +150°C at the sense point. The AP1117 is pin compatible with similar ‘1117 regulators and offers extended temperature range and improved regulation specifications. AP1117 series regulators have internal thermal limiting circuitry designed to protect the device during overload conditions. For continuous normal load conditions however, the maximum junction temperature rating of +125°C must not be exceeded. It is important to give careful consideration to all sources of thermal resistance from junction to ambient. For the SOT223 and TO252 packages, which are designed to be surface mounted, additional heat sources mounted near the device must also be considered. Heat sinking is accomplished using the heat spreading capability of the PCB and its copper traces. The θJC (junction to tab) of the TO252 and SOT223 are +12°C/W and +15°C/W respectively. Thermal resistances from tab to ambient can be as low as 30°C/W. The total thermal resistance from junction to ambient (θJA) can be as low as +42 ~ +46°C/W. This requires a reasonable sized PCB with at least one layer of copper to spread the heat across the board and couple it into the surrounding air. Datasheet specifications using 2 oz copper and a 5mm x 5mm pad with TA = +27°C, no air flow yielded θJA (junction to tab) of +73°C/W and +107°C/W for TO252 and SOT223 respectively. The thermal resistance for each application will be affected by thermal interactions with other components on the board. Some experimentation will be necessary to determine the actual value. See graphs of power dissipation and thermal pictures of different size PCB copper area for guidance.

Page 8

AP1117/AP1117I Document number: DS31009 Rev. 23 - 2 7 of 13 www.diodes.com June 2013 © Diodes Incorporated AP1117/AP1117I Ordering Information Device Junction Temperature Range Package Code Packaging (Note 10) Tube 13” Tape and Reel Quantity Part Number Suffix Quantity Part Number Suffix AP1117DXXL-13 0 to +125°C D TO252 NA NA 2500/Tape & Reel -13 AP1117DXXG-13 -20 to +125°C D TO252 NA NA 2500/Tape & Reel -13 AP1117IDXXG-13 -40 to +125°C D TO252 NA NA 2500/Tape & Reel -13 AP1117EXXL-13 0 to +125°C E SOT223 NA NA 2500/Tape & Reel -13 AP1117EXXG-13 -20 to +125°C E SOT223 NA NA 2500/Tape & Reel -13 AP1117IEXXG-13 -40 to +125°C E SOT223 NA NA 2500/Tape & Reel -13 AP1117KXXL-13 0 to +125°C K TO263 NA NA 800/Tape & Reel -13 AP1117KXXG-13 0 to +125°C K TO263 NA NA 800/Tape & Reel -13 AP1117TXXL-U 0 to +125°C T TO220-3 50 -U NA NA AP1117TXXG-U 0 to +125°C T TO220-3 50 -U NA NA AP1117YXXL-13 0 to +125°C Y SOT89-3 NA NA 2500/Tape & Reel -13 AP1117YXXG-13 0 to +125°C Y SOT89-3 NA NA 2500/Tape & Reel -13 Notes: 10. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. Note: 11. 22uF is suggested for Cin/Cout value when application is required to work under 0℃. 4003002001000 600500 800700 900 COPPER AREA (mm ) 2 1.6 0.6 1.5 1.4 1.3 0.9 0.8 0.7 1.2 1.1 1.0 160 60 150 140 130 90 80 70 120 110 100 P (W ) D  J A ( °C /W ) P vs. Copper area 1oz Cu on FR4 D JA vs. Copper area 1oz Cu on Fr4 Temperature Package VOUT Lead Free Packing Blank : Commercial I : Industrial D : TO252 E : SOT223 K : TO263 T : TO220-3 Y : SOT89-3 Blank : ADJ 15 : 1.5V 18 : 1.8V 25 : 2.5V 33 : 3.3V 50 : 50V L : Lead Free G : Green U : Tube 13 : Tape & Reel AP1117 X X XX X X - Pb Lead-Free Pb Lead-Free Pb Lead-Free Pb Lead-Free Pb Lead-Free

Page 9

AP1117/AP1117I Document number: DS31009 Rev. 23 - 2 8 of 13 www.diodes.com June 2013 © Diodes Incorporated AP1117/AP1117I Marking Information (1) SOT223 Y W X 17X-VV Logo X : Internal code ( Top View ) Y : Year : 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z repersents 52 and 53 week Temperature Range Part Number Blank : Commercial I : Industrial 1117 for ADJ 17-VV: 15 for 1.5V 18 for 1.8V 25 for 2.5V 33 for 3.3V 50 for 5.0V 1117I for ADJ 17I-VV: 15 for 1.5V 18 for 1.8V 25 for 2.5V 33 for 3.3V 50 for 5.0V (2) TO252 (3) SOT89-3 Identification Code Output Version DA AP1117-ADJ DB AP1117-1.5V DC AP1117-1.8V DD AP1117-2.5V DE AP1117-3.3V DF AP1117-5.0V

Page 10

AP1117/AP1117I Document number: DS31009 Rev. 23 - 2 9 of 13 www.diodes.com June 2013 © Diodes Incorporated AP1117/AP1117I Marking Information (cont.) (4) TO263 1117-VV X : Internal code YY : Year : 01~09 ( Top View ) YY WW X X WW : Week : 01~52, 52 represents Logo G : Green Part Number VV: 15 for 1.5V 18 for 1.8V 25 for 2.5V 33 for 3.3V 50 for 5.0V Blank for ADJ 52 and 53 week L : Lead Free (5) TO220-3 ( Top View ) 17 - VV Logo YY WW X X Part Number 1117 for ADJ 17-VV : 15 for 1.5V 18 for 1.8V 25 for 2.5V 33 for 3.3V 50 for 5.0V X : Internal code WW : Week : 01~52, 52 represents YY : Year : 01~09 52 and 53 week G : Green L : Lead Free Package Outline Dimensions (All dimensions in mm.) (1) Package Type: SOT223 SOT223 Dim Min Max Typ A 1.55 1.65 1.60 A1 0.010 0.15 0.05 b1 2.90 3.10 3.00 b2 0.60 0.80 0.70 C 0.20 0.30 0.25 D 6.45 6.55 6.50 E 3.45 3.55 3.50 E1 6.90 7.10 7.00 e — — 4.60 e1 — — 2.30 L 0.85 1.05 0.95 Q 0.84 0.94 0.89 All Dimensions in mm A1 A

AP1117D25G-13 Reviews

Average User Rating
5 / 5 (139)
★ ★ ★ ★ ★
5 ★
125
4 ★
14
3 ★
0
2 ★
0
1 ★
0

Write a Review

Not Rated
Thanks for Your Review!

May*****udley

July 18, 2020

Thousands of in stock parts with low cost shipping and standard quality.

Chris*****r Rai

July 17, 2020

I can find what I want, and also trust I'm getting what I paid for. Many times I had to send things back or eat the cost dealing shady sellers, either way it cost me.

Shau*****agat

July 16, 2020

Every time I order, I get it correctly filled and faster than most of website. For a friendly use operate system, you guys are the best!

Mil*****arsa

July 13, 2020

Excellent ease of using site both in finding products and ordering! Also shipping charges reasonable.

Gibs*****uang

June 28, 2020

Not messy and easy to handle. I've used these professionally and for my self, and they never failed me.

Tris*****Bruce

June 26, 2020

Super Fast Delivery & Well Packaged - Great Service - No Problems

Esme*****ohit

June 25, 2020

Great website. Well organized and easy to search products.

Jeff*****Mistry

June 19, 2020

The parts as described and fast shipping. Thanks for the great service

Karl*****hasin

June 5, 2020

I enjoy doing business with Heisener, please keep up the GREAT Service!

Madd*****kinner

June 1, 2020

Well packed in anti-static bags. Repaired my amp perfectly - thank you!

AP1117D25G-13 Guarantees

Service Guarantee

Service Guarantees

We guarantee 100% customer satisfaction.

Our experienced sales team and tech support team back our services to satisfy all our customers.

Quality Guarantee

Quality Guarantees

We provide 90 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.

AP1117D25G-13 Packaging

Verify Products
Customized Labels
Professional Packaging
Sealing
Packing
Insepction

AP1117D25G-13 Related Products

4HF212500Z4BACUGI 4HF212500Z4BACUGI IDT, Integrated Device Technology Inc, OSC MEMS 212.50MHZ LVDS SMD, 6-SMD, No Lead, - View
1812Y1K00150FFR 1812Y1K00150FFR Knowles Syfer, CAP CER 15PF 1000V C0G/NP0 1812, 1812 (4532 Metric), - View
1808J0100333FCT 1808J0100333FCT Knowles Syfer, CAP CER 0.033UF 10V C0G/NP0 1808, 1808 (4520 Metric), - View
CC0603GRNPO9BN821 CC0603GRNPO9BN821 Yageo, CAP CER 820PF 50V NPO 0603, 0603 (1608 Metric), - View
ALS81G913NT100 ALS81G913NT100 KEMET, CAP ALUM 91000UF 20% 100V SCREW, Radial, Can - Screw Terminals, - View
CZRC5366B-G CZRC5366B-G Comchip Technology, DIODE ZENER 39V 5W DO214AB, DO-214AB, SMC, - View
hotV42MLA1206H V42MLA1206H Littelfuse Inc., VARISTOR 53V 180A 1206, 1206 (3216 Metric), - View
P51-2000-S-W-D-20MA-000-000 P51-2000-S-W-D-20MA-000-000 SSI Technologies Inc, SENSOR 2000PSIS 1/8 NPT 4-20MA, Cylinder, - View
CMF557K5000FKRE CMF557K5000FKRE Vishay Dale, RES 7.5K OHM 1/2W 1% AXIAL, Axial, - View
T37011-18-0 T37011-18-0 Curtis Industries, CONN BARRIER STRP 18CIRC 0.375", -, - View
PV75W14-5P PV75W14-5P ITT Cannon, LLC, CONN PLUG 5POS STRAIGHT W/PINS, -, - View
VI-B53-EV VI-B53-EV Vicor Corporation, CONVERTER MOD DC/DC 24V 150W, Full Brick, - View
Payment Methods
Delivery Services

Quick Inquiry

AP1117D25G-13

Certified Quality

Heisener's commitment to quality has shaped our processes for sourcing, testing, shipping, and every step in between. This foundation underlies each component we sell.

ISO9001:2015, ICAS, IAF, UKAS

View the Certificates

Do you have any question about AP1117D25G-13?

+86-755-83210559 ext. 811 SalesDept@heisener.com heisener007 2354944915 Send Message

AP1117D25G-13 Tags

  • AP1117D25G-13
  • AP1117D25G-13 PDF
  • AP1117D25G-13 datasheet
  • AP1117D25G-13 specification
  • AP1117D25G-13 image
  • Diodes Incorporated
  • Diodes Incorporated AP1117D25G-13
  • buy AP1117D25G-13
  • AP1117D25G-13 price
  • AP1117D25G-13 distributor
  • AP1117D25G-13 supplier
  • AP1117D25G-13 wholesales

AP1117D25G-13 is Available in