Contact Us
SalesDept@heisener.com +86-755-83210559 ext. 811

CPC1465D

hotCPC1465D

CPC1465D

For Reference Only

Part Number CPC1465D
Manufacturer IXYS Integrated Circuits Division
Description IC DC TERMINATION 16-SOIC
Datasheet CPC1465D Datasheet
Package 16-SOIC (0.295", 7.50mm Width)
In Stock 857 piece(s)
Unit Price $ 4.4895 *
Lead Time Can Ship Immediately
Estimated Delivery Time Jun 3 - Jun 8 (Choose Expedited Shipping)
Request for Quotation

Part Number # CPC1465D (Interface - Telecom) is manufactured by IXYS Integrated Circuits Division and distributed by Heisener. Being one of the leading electronics distributors, we carry many kinds of electronic components from some of the world’s top class manufacturers. Their quality is guaranteed by its stringent quality control to meet all required standards.

For CPC1465D specifications/configurations, quotation, lead time, payment terms of further enquiries please have no hesitation to contact us. To process your RFQ, please add CPC1465D with quantity into BOM. Heisener.com does NOT require any registration to request a quote of CPC1465D.

CPC1465D Specifications

ManufacturerIXYS Integrated Circuits Division
CategoryIntegrated Circuits (ICs) - Interface - Telecom
Datasheet CPC1465DDatasheet
Package16-SOIC (0.295", 7.50mm Width)
Series-
FunctionDC Signal Termination
InterfaceISDN, SHDSL
Number of Circuits1
Voltage - Supply-
Current - Supply-
Power (Watts)1W
Operating Temperature-40°C ~ 85°C
Mounting TypeSurface Mount
Package / Case16-SOIC (0.295", 7.50mm Width)
Supplier Device Package16-SOIC

CPC1465D Datasheet

Page 1

Page 2

INTEGRATED CIRCUITS DIVISION DS-CPC1465-R05 www.ixysic.com 1 CPC1465 SHDSL/ISDN DC Termination IC Features • Meets wetting (sealing) current requirements per ITU-T G.991.2 • Integrated bridge rectifier for polarity correction • Uses inexpensive opto-coupler for DC signalling • Electronic inductor, breakover, and latch circuits • Current limiting and excess power protection circuits • ANSI SHDSL and ISDN compatible • MLT and SARTS compatible • Compatible with portable test sets • Excellent linearity • Compatible with GlobespanVirata and Conexant SHDSL transceiver chip set families • Small SOIC or DFN Package • DFN package 60 percent smaller than SOIC • SOIC is pin compatible with Agere LH1465AAE • Flammability rating UL 94 V-0 Applications • Router and bridge customer premises equipment • Leased line equipment • T1/E1 network line cards and repeaters • Network Termination 1 (NT1) equipment • Mechanized Loop Test (MLT) networks • Switched Access Remote Test System (SARTS) networks Description The CPC1465 is a DC termination IC used in Single-pair High-speed Digital Subscriber Line (SHDSL) and Integrated Services Digital Network subscriber line (ISDN) equipment. It provides a polarity insensitive DSL loop sealing current DC termination with a recognizable device signature for MLT systems. The CPC1465 passes low frequency ISDN network signalling information via an inexpensive optocoupler to the NT1’s internal control logic. Ordering Information Figure 1. CPC1465 Typical 2-Wire DC Termination Application Part Number Description CPC1465D DC Termination IC, 16-pin SOIC in tubes, 47/tube CPC1465DTR DC Termination IC, 16-pin SOIC tape and reel, 1000/reel CPC1465M DC Termination IC, 16-pin DFN in tubes, 52/tube CPC1465MTR DC Termination IC, 16-pin DFN tape and reel, 1000/reel CPC1465 Digital Control Circuitr Transceiver TIP RING 2.2k 5% Ω 4W PR+ NC NC TIP RING NC NC PR- TC NC NC RS PD NC NC COM dc Blocking Capacitor1 Fμ 1% 1/4W Current Limit and Excess Power Protection Electronic Inductor, Breakover, Latch, and Opto Driver Bridge Rectifier 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 NOTE: Pinout is for the SOIC package 68.1Ω 1 2 4 3 75kΩ VCC CPC1303 (5kV rms Isolation) or CPC1001N (1500V rms Isolation)

Page 3

INTEGRATED CIRCUITS DIVISION CPC1465 2 www.ixysic.com R05 1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 Package Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 Pin Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.3 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.4 Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.4.1 DC Characteristics, Normal Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.4.2 AC Characteristics, Normal Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.4.3 Transition Characteristics, Normal Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.5 Application Signalling Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 1.5.1 LED Trigger Characteristics During MLT Signalling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 1.5.2 LED Trigger Characteristics During Dial Test Set Signalling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2. Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.2 Surge Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.3 Bridge Rectifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.4 State Transitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.4.1 Activation - On-State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.4.2 Deactivation - Off-State . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.5 Photo-Diode (PD) Output Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.6 On-State Behavior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.6.1 Typical Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.6.2 Over-Voltage Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 3. Manufacturing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 3.1 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3.1.1 CPC1465D 16-Pin SOIC Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 3.1.2 CPC1465M 16-Pin DFN Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 3.2 Tape and Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3.2.1 CPC1465DTR 16-Pin SOIC Tape & Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 3.2.2 CPC1465MTR 16-Pin DFN Tape & Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Page 4

INTEGRATED CIRCUITS DIVISION CPC14651. Specifications 1.1 Package Pinout 1.2 Pin Description 1.3 Absolute Maximum Ratings Electrical absolute maximum ratings are at 25C. Absolute maximum ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. CPC1465D 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 NC PR+ NC TIP RING NC NC PR- TC NC NC RS PD NC NC COM CPC1465M 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 NC PR+ TIP NC NC RING NC PR- TC NC NC RS PD NC NC COM SOIC Pin DFN Pin Name Description 1 1 PR+ Protection resistor positive side 2 2 NC No connection 3 NC No connection 4 3 TIP Tip lead 4 NC No connection 5 NC No connection 5 6 RING Ring lead 6 NC No connection 7 7 NC No connection 8 8 PR- Protection resistor negative side 9 9 COM Common 10 10 NC No connection 11 11 NC No connection 12 12 PD Photo-diode (LED input current) 13 13 RS Current limiting resistor 14 14 NC No connection 15 15 NC No connection 16 16 TC Timing capacitor Parameter Minimum Maximum Unit Maximum Voltage (T to R, R to T)* - 300 V Power dissipation - 1 W Operating temperature -40 +85 °C Operating relative humidity 5 95 % Storage temperature -40 +125 °C *IXYS Integrated Circuits recommends the use of room-temperature-vulcanizing silicone RTV sealant on the SOIC package tip and ring pins (pins 4 and 5) to guard against the possibility of arcing.R05 www.ixysic.com 3

Page 5

INTEGRATED CIRCUITS DIVISION CPC14651.4 Electrical Characteristics Unless otherwise specified, minimum and maximum values are guaranteed by production testing requirements. Typical values are characteristic of the device and are the result of engineering evaluations. In addition, typical values are provided for informational purposes only and are not part of the testing requirements. All electrical specifications are provided for TA=25C 1.4.1 DC Characteristics, Normal Operation For operational templates: (see Figure 2 on page 5) and (see Figure 3 on page 5). 1.4.2 AC Characteristics, Normal Operation For test conditions: (see Figure 4 on page 6) and (see Figure 5 on page 6). 1.4.3 Transition Characteristics, Normal Operation For activation/deactivation test conditions: (see Figure 6 on page 7). Parameter Conditions Symbol Minimum Typical Maximum Unit Activate/Non-activate Voltage Off State VAN 30.0 35.0 39.0 V Breakover current - IBO - 0.5 1 mA DC Voltage drop Active State, 1 mA  ISL  20 mA VON - 12.5 15 V DC leakage current VOFF = 20 V ILKG - 1.5 5 A Hold/Release current Active State IH/R 0.1 0.5 1.0 mA Minimum on current VON < 54 V IMIN1 20 38 - mA Minimum on current 54 V  VON  100 V for 2 seconds, source resistance 200  to 4 k IMIN2 9.0 45 - mA Minimum on current VON > 100 V IMIN3 0 0.1 - mA Maximum on current VON  70 V IMAX1 - 38.4 70 mA Maximum on current VON > 70 V IMAX2 - - mA Photodiode drive current Active State IPD 0.2 0.3 10 mA Parameter Conditions Symbol Minimum Typical Maximum Unit ac impedance 200 Hz to 50 kHz ZMT 10 38 - k Linearity distortion f= 200 Hz to 40 kHz, ISL = 1 mA to 20 mA, VAPP  10.5 VPP D1 75 78 - dB Linearity distortion f= 200 Hz to 40 kHz, ISL = 1 mA to 20 mA, VAPP  12 VPP D2 50 70 - dB Parameter Conditions Symbol Minimum Typical Maximum Unit Activate time (see Figure 7 on page 7) t1 3.0 13 50 ms Deactivate time (see Figure 8 on page 7) t2 3.0 - 100 ms VON 1k -----------4 www.ixysic.com R05

Page 6

INTEGRATED CIRCUITS DIVISION CPC1465Figure 2. I-V Requirements Template, 0 V to 50 V Figure 3. I-V Requirements Template, 0 V to 250 V 1A 100 mA 10 mA 1 mA 100 A 10 A 1 A 0 µ µ µ t n err u C Absolute Voltage (V) 0 10 20 30 40 50 Transition Region Transition Region On State Off State IMAX1 IMIN1 VON IHR IBO ILKG VAN 1A 100 mA 10 mA 1 mA 100 A 10 A 1 A 0 μ μ μ C u rr e n t Absolute Voltage (V) 0 50 100 150 200 250 IMAX1 IMIN2 IMIN1 IMAX2 70 V, 70 mA 54 V, 9 mA 100 V, 0 mAR05 www.ixysic.com 5

Page 7

INTEGRATED CIRCUITS DIVISION CPC1465Figure 4. Test Circuit for ac Impedance and Linearity Figure 5. Linearity Requirement Template 68 Fμ 1k Ω DUT VAPP ac generator ISL 1 - 20 mA dc current source Vmt Vsig Zmt 1000 Vmt Vsig ---------------------------= Linearity 20 Vmt Vsig2ndHarmonic ---------------------------------------log 20 1000 67.5 -----------log+= 75 50 0 L in e a ri ty ( d B ) Applied ac Voltage (V )PP 0 0.5 10.0 10.5 11.0 11.5 12.0 Unacceptable Acceptable6 www.ixysic.com R05

Page 8

INTEGRATED CIRCUITS DIVISION CPC1465Figure 6. Test Circuit for Activate and Deactivate Times Figure 7. Applied Waveform for Activation Test Figure 8. Applied Waveform for Deactivation Test 1 Fμ 85 Ω DUT Pulse generator 85 mH 40 V 30 V 20 V 10 V 0 43.5 V Source Impedance 200 to 4kΩ Ωt1 500 ms Measure 2.0 mA 1.5 mA 1.0 mA 0.5 mA 0 Current source limited to 30 V t2 500 ms MeasureR05 www.ixysic.com 7

Page 9

INTEGRATED CIRCUITS DIVISION CPC14651.5 Application Signalling Characteristics These tests assume crowbar protection across the CPC1465 limiting peak potentials to 250 V. 1.5.1 LED Trigger Characteristics During MLT Signalling For test conditions: (see Figure 9 on page 9). 1.5.2 LED Trigger Characteristics During Dial Test Set Signalling For test conditions: (see Figure 9 on page 9). Parameter Conditions Symbol Minimum Typical Maximum Unit Applied ac Voltage - - 60 - 62 VPEAK Applied ac frequency - - 2 - 3 Hz Number of half-cycles applied - - 6 - 10 - Total loop resistance - - 900 - 4500  Required opto-coupler response Number of pulses per half-cycle applied - - - 1 - - Pulse width (opto on) (see Figure 9 on page 9) TON 10 - - ms Pulse width (opto off) (see Figure 9 on page 9) TOFF 10 - - ms Parameter Conditions Symbol Minimum Typical Maximum Unit Applied dc battery Voltage - - -43.5 - -56 VDC Frequency (pulses per second) - - 4 - 8 - Percent break - - 40 - 60 % Number of pulses - - 6 - 10 - Total Loop Resistance - - 200 - 4000  Required opto-coupler response Number of pulses per make/break applied - - - 1 - - Pulse width (opto on) (see Figure 9 on page 9) TON 10 - - ms Pulse width (opto off) (see Figure 9 on page 9) TOFF 10 - - ms8 www.ixysic.com R05

Page 10

INTEGRATED CIRCUITS DIVISION CPC1465Figure 9. Test Circuit for LED Operation Figure 10. Typical ISDN NT1 Application Diagram CPC1465 TIP RING 2.2k 5% Ω 4W PR+ NC NC TIP RING NC NC PR- TC NC NC RS PD NC NC COM 1 Fμ 68.1 1% Ω 1/4 W 85Ω 25Ω 25Ω + R 200 - 4k 900 - 4.5k (MLT) LOOP Ω Ω Ω Ω V -43.5V to -56V 60V , 2 Hz - 3 Hz (MLT) BAT PEAK 85mH Series rotary dial Shunt rotary dial 5V 1 Fμ 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 NOTE: Pinout is for the SOIC package 1 2 4 3 75kΩ VCC CPC1001N VOUT CPC1465 TIP RING 2.2k 5% Ω 4W PR+ NC NC TIP RING NC NC PR- TC NC NC RS PD NC NC COM 68.1 1% Ω 1/4 W 1 Fμ 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 1 Fμ 3.6V NOTE: Pinout is for the SOIC package V 5V CC 1 2 4 3 75kΩCPC1001N VOUTR05 www.ixysic.com 9

CPC1465D Reviews

Average User Rating
5 / 5 (184)
★ ★ ★ ★ ★
5 ★
166
4 ★
18
3 ★
0
2 ★
0
1 ★
0

Write a Review

Not Rated
Thanks for Your Review!

Zay*****Mann

May 25, 2020

It's so nice to have all these babies. I was using so many for projects, I decided to buy these. They'll definitely last me a while!

Colb*****octor

May 24, 2020

Awesome selection for all electronic parts here! Great service when it is needed too! Prices are competitive as well. Thank you!

Jeremi*****kinson

May 21, 2020

The fastest shipping I've seen yet

Arabell*****taraman

May 20, 2020

Used these for a solar project, and they are working great.

Lisa*****lier

May 10, 2020

The helper is super handy, especially if you work with medium size PCB boards as it allows to hold the board steady in every position. It feels pretty sturdy and of good quality.

Kal*****Bass

April 25, 2020

Excellent safe and secure packing. Fast ship out. Thanks

Karli*****liamson

April 21, 2020

No problem in making an order and will see how the shipping goes.

Mali*****pence

April 20, 2020

Always meet my expectations with order and questions.

Aria*****nglish

April 13, 2020

It arrived earlier than the deadline. All is OK. Thank you

Orio*****dson

April 12, 2020

Nice to have an assortment on hand, just in case. Happy with this purchase.

CPC1465D Guarantees

Service Guarantee

Service Guarantees

We guarantee 100% customer satisfaction.

Our experienced sales team and tech support team back our services to satisfy all our customers.

Quality Guarantee

Quality Guarantees

We provide 90 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.

CPC1465D Packaging

Verify Products
Customized Labels
Professional Packaging
Sealing
Packing
Insepction

CPC1465D Related Products

MAX1248BCEE MAX1248BCEE Maxim Integrated, IC ADC LP 10-BIT SERIAL 16-QSOP, 16-SSOP (0.154", 3.90mm Width), - View
8N4DV85LC-0010CDI8 8N4DV85LC-0010CDI8 IDT, Integrated Device Technology Inc, IC OSC VCXO DUAL FREQ 6-CLCC, 6-CLCC, - View
HC4-HL-DC48V HC4-HL-DC48V Panasonic Electric Works, RELAY GEN PURPOSE 4PDT 5A 48V, -, - View
742C083201JP 742C083201JP CTS Resistor Products, RES ARRAY 4 RES 200 OHM 1206, 1206 (3216 Metric), Concave, Long Side Terminals, - View
EXB-Q16P334J EXB-Q16P334J Panasonic Electronic Components, RES ARRAY 15 RES 330K OHM 1506, 1506, Convex, Long Side Terminals, - View
3212061 3212061 Phoenix Contact, TERM BLOCK PLUG 9POS 90DEG, -, - View
1707793 1707793 Phoenix Contact, TERM BLOCK HDR 6POS VERT 3.81MM, -, - View
68685-349LF 68685-349LF Amphenol FCI, CONN RCPT 49POS .100" SNG ROW, -, - View
SBH51-LPPE-D11-SP-BK SBH51-LPPE-D11-SP-BK Sullins Connector Solutions, CONN HEADER 22POS 1MM GOLD SMD, -, - View
T4113002081-000 T4113002081-000 TE Connectivity AMP Connectors, CONN PLUG MALE 8POS SCREW GOLD, -, - View
ACS02C14S-2P-472 ACS02C14S-2P-472 Amphenol Industrial Operations, ER 4C 4#16S PIN RECP BOX, -, - View
UEI-3.3/15-Q12PR-C UEI-3.3/15-Q12PR-C Murata Power Solutions Inc., DC/DC CONVERTER 3.3V 50W, 9-DIP Module, 8 Leads, - View
Payment Methods
Delivery Services

Quick Inquiry

CPC1465D

Certified Quality

Heisener's commitment to quality has shaped our processes for sourcing, testing, shipping, and every step in between. This foundation underlies each component we sell.

ISO9001:2015, ICAS, IAF, UKAS

View the Certificates

Do you have any question about CPC1465D?

+86-755-83210559 ext. 811 SalesDept@heisener.com heisener007 2354944915 Send Message

CPC1465D Tags

  • CPC1465D
  • CPC1465D PDF
  • CPC1465D datasheet
  • CPC1465D specification
  • CPC1465D image
  • IXYS Integrated Circuits Division
  • IXYS Integrated Circuits Division CPC1465D
  • buy CPC1465D
  • CPC1465D price
  • CPC1465D distributor
  • CPC1465D supplier
  • CPC1465D wholesales

CPC1465D is Available in