Contact Us
SalesDept@heisener.com +86-755-83210559 ext. 811

CRA12E0834K30JTR

CRA12E0834K30JTR

CRA12E0834K30JTR

For Reference Only

Part Number CRA12E0834K30JTR
Manufacturer Vishay Dale
Description RES ARRAY 4 RES 4.3K OHM 2012
Datasheet CRA12E0834K30JTR Datasheet
Package 2012, Convex, Long Side Terminals
In Stock 442 piece(s)
Unit Price $ 0.0600 *
Lead Time To be Confirmed
Estimated Delivery Time Jul 11 - Jul 16 (Choose Expedited Shipping)
Request for Quotation

Part Number # CRA12E0834K30JTR (Resistor Networks, Arrays) is manufactured by Vishay Dale and distributed by Heisener. Being one of the leading electronics distributors, we carry many kinds of electronic components from some of the world’s top class manufacturers. Their quality is guaranteed by its stringent quality control to meet all required standards.

For CRA12E0834K30JTR specifications/configurations, quotation, lead time, payment terms of further enquiries please have no hesitation to contact us. To process your RFQ, please add CRA12E0834K30JTR with quantity into BOM. Heisener.com does NOT require any registration to request a quote of CRA12E0834K30JTR.

CRA12E0834K30JTR Specifications

ManufacturerVishay Dale
CategoryResistors - Resistor Networks, Arrays
Datasheet CRA12E0834K30JTRDatasheet
Package2012, Convex, Long Side Terminals
SeriesCRA12
Circuit TypeIsolated
Resistance (Ohms)4.3k
Tolerance±5%
Number of Resistors4
Number of Pins8
Power Per Element125mW
Temperature Coefficient±200ppm/°C
Operating Temperature-55°C ~ 155°C
Applications-
Mounting TypeSurface Mount
Package / Case2012, Convex, Long Side Terminals
Supplier Device Package-
Size / Dimension0.200" L x 0.120" W (5.08mm x 3.05mm)
Height - Seated (Max)0.028" (0.70mm)

CRA12E0834K30JTR Datasheet

Page 1

Page 2

CRA12E, CRA12S www.vishay.com Vishay Revision: 24-Jun-13 1 Document Number: 31003 For technical questions, contact: thickfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Thick Film Chip Resistor Array FETAURES • Convex terminal array available with either scalloped corners (E version) or square corners (S version) • Wide ohmic range: 10R to 1M0 • 8 or 10 terminal package with isolated resistors • Pure tin solder contacts on Ni barrier layer, provides compatibility with lead (Pb)-free and lead containing soldering processes • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note (1) Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material. Note (2) Preferred way for ordering products is by use of the PART NUMBER. STANDARD ELECTRICAL SPECIFICATIONS MODEL CIRCUIT POWER RATING P70 °C W LIMITING ELEMENT VOLTAGE MAX. V TEMPERATURE COEFFICIENT ± ppm/K TOLERANCE ± % RESISTANCE RANGE  SERIES CRA12E CRA12S 01; 02; 20 0.100 50 100 1 10 to 1M E24; E96 03 0.125 200 2; 5 10 to 1M E24 Zero-Ohm-Resistor: Rmax. = 50 m, Imax. = 1.5 A TECHNICAL SEPCIFICATIONS PARAMETER UNIT CRA12E AND CRA12S CIRCUIT 01; 02; 20 CRA12E AND CRA12S CIRCUIT 03 Rated dissipation at P70 (1) W per element 0.1 0.125 Limiting element voltage  Umax. AC/DC V 50 Insulation voltage Uins (1 min) V 100 Insulation resistance  > 109 Category temperature range °C - 55 to + 155 PART NUMBER AND PRODUCT DESCRIPTION Part Number: CRA12E08347K0JTR (2) MODEL TERMINAL STYLE PIN CIRCUIT VALUE TOLERANCE PACKAGING SPECIAL CRA12 S E 08 10 1 = 01 2 = 02 3 = 03 8 = 20 R = Decimal K = Thousand M = Million 0000 = 0  Jumper F = ± 1 % G = ± 2 % J = ± 5 % Z = 0  Jumper TR Up to 2 digits TL Product Description: CRA12E 08 03 47K 5 % RB8 e3 CRA12E 08 03 47K 5% RB8 e3 MODEL PIN CIRCUIT RESISTANCE VALUE TOLERANCE PACKAGING LEAD (Pb)-FREE CRA12E CRA12S 08 10 01 02 03 20 10R = 10  47K = 47 k 1M = 1M 0R0 = Jumper ± 1 % ± 2 % ± 5 % RB8 RD7 e3 = Pure tin termination finish A 1 2 E 8 3 40C R J RK 0 T7

Page 3

CRA12E, CRA12S www.vishay.com Vishay Revision: 24-Jun-13 2 Document Number: 31003 For technical questions, contact: thickfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 CIRCUIT AVAILABLE TYPES AND RANGES MODEL TERMINAL COUNT CIRCUIT TEMPERATURE COEFFICIENT TOLERANCE CRA12S 10 01 02 03 20 ± 100 ppm/K ± 200 ppm/K ± 1 %; ± 2 %; ± 5 % CRA12E 08 01 02 03 2010 PACKAGING MODEL TAPE WIDTH DIAMETER PITCH PIECES/REEL BLISTER TAPE ACC. IEC 60286-3, TYPE II PART NUMBER PRODUCT DESCRIPTION CRA12E 08 CRA12E 10 CRA12S 10 12 mm 180 mm/7" 330 mm/13" 8 mm 2000 5000 TR TL RB8 RD7 Pin 1 10 pin 02 Circuit Pin 1 8 pin 10 pin 01 Circuit 03 Circuit 20 Circuit Pin 18 pin 10 pin

Page 4

CRA12E, CRA12S www.vishay.com Vishay Revision: 24-Jun-13 3 Document Number: 31003 For technical questions, contact: thickfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DERATING DIMENSIONS - 55 - 25 0 25 50 75 100 125 155 175 120 100 80 60 40 20 0 70 Ambient Temperature in °C F ra c ti o n o f R a te d D is s ip a ti o n i n % W e a a a eb c d p B T A L PIN 1 W B* A* P 1 0 3 S-Version W a b c p B T A L PIN 1 W B* A* P 1 0 3 E-Version MODEL PIN NO # DIMENSIONS in millimeters L A A* B B* P T W CRA12E 8 5.08 0.79 - 0.51 0.38 1.27 0.55 3.05 CRA12E 10 6.40 0.79 - 0.51 0.38 1.27 0.55 3.05 CRA12S 10 6.40 0.79 0.89 0.51 0.38 1.27 0.55 3.05 TOL. ± 0.15 ± 0.15 ± 0.15 ± 0.25 ± 0.2 ± 0.1 ± 0.15 ± 0.15 SOLDER PAD DIMENSIONS in millimeters c w d p a b e WAVE 2.2 4.3 0.57 1.27 0.71 1.05 1.09 REFLOW 2.2 3.9 0.57 1.27 0.71 0.86 1.09

Page 5

CRA12E, CRA12S www.vishay.com Vishay Revision: 24-Jun-13 4 Document Number: 31003 For technical questions, contact: thickfilmchip@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) Figures are given for a single element. All tests are carried out in accordance with the following specifications: • EN 60115-1, generic specification • EN 140400, sectional specification • EN 140401-802, detail specification • IEC 60068-2 environmental test procedures Packaging of components is done in paper or blister tapes according to IEC 60286-3 TEST PROCEDURES AND REQUIREMENTS EN 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (R)(1) STABILITY CLASS 1 OR BETTER STABILITY CLASS 2 OR BETTER Stability for product type: 10  to 1 M CRA12E/CRA12S 4.5 - Resistance - ± 1 % ± 2 %, ± 5 % 4.7 - Voltage proof U = 1.4 x Uins; 60 s No flashover or breakdown 4.13 - Short time overload  2 x Umax.; Duration according to style ± (0.25 % R + 0.05 ) ± (0.5 % R + 0.05 ) 4.17.2 58 (Td) Solderability Solder bath method; Sn60Pb40; non-activated flux; (235 ± 5) °C; (2 ± 0.2) s Good tinning ( 95 % covered) no visible damage Solder bath method; Sn96.5Ag3Cu0.5; non-activated flux; (245 ± 5) °C; (3 ± 0.3) s Good tinning ( 95 % covered) no visible damage 4.8.4.2 - Temperature coefficient (20/- 55/20) °C and (20/125/20) °C ± 100 ppm/K ± 200 ppm/K 4.32 21 (UU3) Shear (adhesion) 45 N No visible damage 4.33 21 (UU1) Substrate bending Depth 2 mm; 3 times No visible damage, no open circuit in bent position ± (0.25 % R + 0.05 ) 4.19 14 (Na) Rapid change of temperature 30 min. at - 55 °C; 30 min at 125 °C 5 cycles 1000 cycles ± (0.25 % R + 0.05 ) ± (1 % R + 0.05 ) ± (0.5 % R + 0.05 ) ± (1 % R + 0.05 ) 4.23 - Dry heat - ± (1 % R + 0.05 ) ± (2 % R + 0.1 ) 4.23.2 2 (Ba) Damp heat, cyclic 125 °C; 16 h 4.23.3 30 (Db) Cold 55 °C;  90 % RH; 24 h; 1 cycle 4.23.4 1 (Aa) Low air pressure - 55 °C; 2 h 4.23.5 13 (M) - 1 kPa; (25 ± 10) °C; 1 h 4.23.6 30 (Db) Damp heat, cyclic 55 °C;  90 % RH; 24 h; 5 cycle 4.23.7 - DC load 4.25.1 - Endurance at 70 °C 1.5 h on; 0.5 h off; 70 °C; 1000 h 70 °C; 8000 h ± (1 % R + 0.05 ) ± (2 % R + 0.1 ) ± (2 % R + 0.1 ) ± (4 % R + 0.1 ) 4.18.2 58 (Td) Resistance to soldering heat Solder bath method; (260 ± 5) °C; (10 ± 1) s ± (0.25 % R + 0.05 ) ± (0.5 % R + 0.05 ) 4.35 - Flammability, needle flame test IEC 60695-11-5; 10 s No burning after 30 s 4.24 78 (Cab) Damp heat, steady state (40 ± 2) °C; (93 ± 3) % RH; 56 days ± (1 % R + 0.05 ) 4.25.3 - Endurance at upper category temperature 155 °C; 1000 h ± (1 % R + 0.05 ) ± (2 % R + 0.1 ) 4.40 - Electrostatic discharge (human body model) IEC 61340-3-1; 3 positive and 3 negative discharges; ESD voltage: 500 V ± (1 % R + 0.05 ) 4.29 45 (XA) Component solvent resistance Isopropyl alcohol; 50 °C; method 2 No visible damage 4.30 45 (XA) Solvent resistance of marking Isopropyl alcohol; 50 °C; method 1; toothbrush Marking legible, no visible damage 4.22 6 (Fc) Vibration, endurance by sweeping f = 10 Hz to 2000 Hz; x, y, z  1.5 mm; A  200 m/s2; 10 sweeps per axis ± (0.25 % R + 0.05 ) ± (0.5 % R + 0.05 ) 4.37 - Periodic electric overload 0.1 s on; 2.5 s off; 1000 cycles ± (1 % R + 0.05 ) 4.27 - Single pulse high voltage overload, 10 μs/700 μs 10 pulses ± (1 % R + 0.05 ) U 2.5 x P70 x R= U P70 x R= U P70 x R Umax.= U 15 x P70 x R 2 x Umax.= Û 10 x P70 x R 2 x Umax.=

CRA12E0834K30JTR Reviews

Average User Rating
5 / 5 (99)
★ ★ ★ ★ ★
5 ★
89
4 ★
10
3 ★
0
2 ★
0
1 ★
0

Write a Review

Not Rated
Thanks for Your Review!

Geor*****Cuevas

June 30, 2020

Components all tested within limits of specifications. Components came packaged in an easy to identify resealable bag and will work well for my projects.

Sam*****Bruce

June 27, 2020

Every time I order, I get it correctly filled and faster than most of website. For a friendly use operate system, you guys are the best!

Tal*****Guha

June 16, 2020

Very easy to find and order what I wanted. Being able to add multiple items in various quantities from an online catalog page with a simple click.

Andr*****hnson

June 12, 2020

To be honest, I think you are doing an outstanding job.

Ava*****niels

June 3, 2020

Those components are in stock shipped fast and arrive promptly. Really Fast!

Kays*****shley

May 29, 2020

I like this way to add a project, choose existing project to add components. I use this method frequently to keep track of my projects. Thanks Heisener!

Ray*****Basak

May 28, 2020

Used for a solar project. Working as hoped. I'd buy again.

Henle*****phrey

May 24, 2020

Resonators were genuine Murata components and arrived in 3 days from Hongkong

Walk*****hurana

May 20, 2020

good item, quick delivery, prefer to recommended.

Mary*****connor

May 15, 2020

Perfectly satisfied with item. Top supplier on my list.

CRA12E0834K30JTR Guarantees

Service Guarantee

Service Guarantees

We guarantee 100% customer satisfaction.

Our experienced sales team and tech support team back our services to satisfy all our customers.

Quality Guarantee

Quality Guarantees

We provide 90 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.

CRA12E0834K30JTR Packaging

Verify Products
Customized Labels
Professional Packaging
Sealing
Packing
Insepction

CRA12E0834K30JTR Related Products

SIT1602BI-73-28N-38.000000E SIT1602BI-73-28N-38.000000E SiTIME, -40 TO 85C, 2016, 50PPM, 2.8V, 3, -, CRA12 View
74LVC32AD,118 74LVC32AD,118 Nexperia USA Inc., IC GATE OR 4CH 2-INP 14-SO, 14-SOIC (0.154", 3.90mm Width), CRA12 View
7203J8ZQE2 7203J8ZQE2 C&K, SWITCH ROCKER DPDT 5A 120V, -, CRA12 View
hotSV01A103AEA01R00 SV01A103AEA01R00 Murata, SENSOR ROTARY POSTIION SMD, -, CRA12 View
RSF12FBR100 RSF12FBR100 Stackpole Electronics Inc., RES 0.1 OHM 1/2W 1% AXIAL, Axial, CRA12 View
RNCS0402BTE6K04 RNCS0402BTE6K04 Stackpole Electronics Inc., RES SMD 6.04KOHM 0.1% 1/16W 0402, 0402 (1005 Metric), CRA12 View
RL0816T-R047-G RL0816T-R047-G Susumu, RES SMD 0.047 OHM 2% 1/4W 0603, 0603 (1608 Metric), CRA12 View
5444673 5444673 Phoenix Contact, TERM BLOCK HDR 5POS VERT 3.81MM, -, CRA12 View
0936000349 0936000349 Molex, LLC, POLYAMIDE CABLE GLAND M20X1,5, -, CRA12 View
1731110006 1731110006 Molex, LLC, FCT HOOD S4 0 DEG PLSTC, -, CRA12 View
CIR020R-20-33S-F80-T112 CIR020R-20-33S-F80-T112 ITT Cannon, LLC, CONN RCPT 11POS PNL MNT SKT, -, CRA12 View
ISL6740IB ISL6740IB Renesas Electronics America, IC REG CTRLR MULT TOP 16SOIC, 16-SOIC (0.154", 3.90mm Width), CRA12 View
Payment Methods
Delivery Services

Quick Inquiry

CRA12E0834K30JTR

Certified Quality

Heisener's commitment to quality has shaped our processes for sourcing, testing, shipping, and every step in between. This foundation underlies each component we sell.

ISO9001:2015, ICAS, IAF, UKAS

View the Certificates

Do you have any question about CRA12E0834K30JTR?

+86-755-83210559 ext. 811 SalesDept@heisener.com heisener007 2354944915 Send Message

CRA12E0834K30JTR Tags

  • CRA12E0834K30JTR
  • CRA12E0834K30JTR PDF
  • CRA12E0834K30JTR datasheet
  • CRA12E0834K30JTR specification
  • CRA12E0834K30JTR image
  • Vishay Dale
  • Vishay Dale CRA12E0834K30JTR
  • buy CRA12E0834K30JTR
  • CRA12E0834K30JTR price
  • CRA12E0834K30JTR distributor
  • CRA12E0834K30JTR supplier
  • CRA12E0834K30JTR wholesales

CRA12E0834K30JTR is Available in