Contact Us
SalesDept@heisener.com +86-755-83210559 ext. 811

ERJ-P6WF34R8V

ERJ-P6WF34R8V

ERJ-P6WF34R8V

For Reference Only

Part Number ERJ-P6WF34R8V
Manufacturer Panasonic Electronic Components
Description RES SMD 34.8 OHM 1% 1/2W 0805
Datasheet ERJ-P6WF34R8V Datasheet
Package 0805 (2012 Metric)
In Stock 305 piece(s)
Unit Price $ 0.0911 *
Lead Time To be Confirmed
Estimated Delivery Time Jul 10 - Jul 15 (Choose Expedited Shipping)
Request for Quotation

Part Number # ERJ-P6WF34R8V (Chip Resistor - Surface Mount) is manufactured by Panasonic Electronic Components and distributed by Heisener. Being one of the leading electronics distributors, we carry many kinds of electronic components from some of the world’s top class manufacturers. Their quality is guaranteed by its stringent quality control to meet all required standards.

For ERJ-P6WF34R8V specifications/configurations, quotation, lead time, payment terms of further enquiries please have no hesitation to contact us. To process your RFQ, please add ERJ-P6WF34R8V with quantity into BOM. Heisener.com does NOT require any registration to request a quote of ERJ-P6WF34R8V.

ERJ-P6WF34R8V Specifications

ManufacturerPanasonic Electronic Components
CategoryResistors - Chip Resistor - Surface Mount
Datasheet ERJ-P6WF34R8VDatasheet
Package0805 (2012 Metric)
SeriesERJ
Resistance34.8 Ohms
Tolerance±1%
Power (Watts)0.5W, 1/2W
CompositionThick Film
FeaturesAutomotive AEC-Q200, Pulse Withstanding
Temperature Coefficient±200ppm/°C
Operating Temperature-55°C ~ 155°C
Package / Case0805 (2012 Metric)
Supplier Device Package0805
Size / Dimension0.079" L x 0.049" W (2.00mm x 1.25mm)
Height - Seated (Max)0.030" (0.75mm)
Number of Terminations2
Failure Rate-

ERJ-P6WF34R8V Datasheet

Page 1

Page 2

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Anti-Surge Thick Film Chip Resistors E 1 R 2 J 3 P 4 0 5 6 6 D 7 1 8 0 9 0 10 2 11 V 12 Thick Film Chip Resistors Product Code Size, Power Rating Code PA2 P03 PA3 P06 P08 P14 Power R. 0.20 W 0.20 W 0.25 W 0.50 W 0.66 W 0.50 W Resistance Tolerance Code D F J Tolerance ± 0.5 % ± 1 % ± 5 % The first two or three digits are significant figures of resistance and the third or 4th one denotes number of zeros following. Three digit type (±5 %), four digit type (±1 %, ±0.5 %) Example: 222→2.2k Ω, 1002→10k Ω Resistance Value Packaging Methods Code V U Part No. ERJP14 ERJPA2 ERJP03 ERJPA3 ERJP06 ERJP08 Packaging Punched Carrier Taping 4 mm pitch, 5,000 pcs. X Punched Carrier Taping 2 mm pitch, 10,000 pcs. Embossed Carrier Taping 4 mm pitch, 5,000 pcs. Inch 0402 0603 0603 0805 1206 1210 a b t W L Anti-Surge Thick Film Chip Re sis tors Type: ERJ PA2, P03, PA3, P06, P08, P14 ● ESD surge characteristics superior to standard metal fi lm resistors ● High reliability Metal glaze thick fi lm resistive element and three layers of electrodes ● Suitable for both refl ow and fl ow soldering ● High power … 0.20 W : 0402 inch / 1005 mm size (ERJPA2), 0603 inch / 1608 mm size (ERJP03) 0.25 W : 0603 inch / 1608 mm size (ERJPA3) 0.50 W : 0805 inch / 2012 mm size (ERJP06), 1210 inch / 3225 mm size (ERJP14) 0.66 W : 1206 inch / 3216 mm size (ERJP08) ● Reference Standards… IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B ● AEC-Q200 qualifi ed ● RoHS compliant ■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions, Please see Data Files Features Explanation of Part Numbers Thick fi lm resistive element Electrode (Inner) Electrode (Outer) Electrode (Between) Alumina substrate Protective coating Part No. Dimensions (mm) Mass (Weight) [g/1000 pcs.]L W a b t ERJPA2 1.00±0.05 0.50±0.05 0.20±0.15 0.25±0.05 0.35±0.05 0.8 ERJP03 1.60±0.15 0.80+0.15 0.15+0.15 0.30±0.15 0.45±0.10 2 ERJPA3 1.60±0.15 0.80+0.15 0.15+0.15 0.25±0.10 0.45±0.10 2 ERJP06 2.00±0.20 1.25±0.10 0.25±0.20 0.40±0.20 0.60±0.10 4 ERJP08 3.20+0.05 1.60+0.05 0.40±0.20 0.50±0.20 0.60±0.10 10 ERJP14 3.20±0.20 2.50±0.20 0.35±0.20 0.50±0.20 0.60±0.10 16 –0.20 –0.15 –0.05 –0.10 –0.05 –0.10 Construction Dimensions in mm (not to scale) Nov. 201711

Page 3

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Anti-Surge Thick Film Chip Resistors –40 –20 0 20 40 60 80 100 120 140 160 0 180–60 70 °C–55 °C 20 40 60 80 100 R a te d L o a d ( % ) Ambient Temperature (°C) 155 °C 125 °C ERJ P06, P08 ERJ PA2, P03, PA3, P14 (1) Rated Continuous Working Voltage (RCWV) shall be de ter mined from RCWV=√Power Rating × Re sis tance Values, or Limiting Element Voltage list ed above, whichever less. (2) Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less. (3) Use it on the condition that the case temperature is below the upper category temperature. Power Derating Curve For resistors operated in ambient temperatures above 70 °C, power rating shall be derated in accordance with the fi gure on the right. ✽ When the temperature of ERJP14 is 155 °C or less, the derating start temperature can be changed to 125 °C. (See the dotted line) Ratings Part No. (inch size) Power Rating (3) at 70 °C (W) Limiting Element Voltage (1) (V) Maximum Overload Voltage (2) (V) Resistance Tolerance (%) Resistance Range (Ω) T.C.R. (×10–6/°C) Category Temperature Range (°C) AEC-Q200 Grade ERJPA2 (0402) 0.20 50 100 ±0.5, ±1 10 to 1M (E24, E96) ±100 –55 to +155 Grade 0 ±5 10 to 1M (E24) ±200 ERJP03 (0603) 0.20 150 200 ±0.5 10 to 1M (E24, E96) ±150 –55 to +155 Grade 0±1 10 to 1M (E24, E96) ±200 ±5 1 to 1M (E24) R < 10 Ω : –150 to +400 10 Ω ≤ R : ±200 ERJPA3 (0603) 0.25 150 200 ±0.5, ±1 10 to 1M (E24, E96) ±100 –55 to +155 Grade 0 ±5 1 to 1.5M (E24) ±200 ERJP06 (0805) 0.50 400 600 ±0.5, ±1 10 to 1M (E24, E96) R < 33 Ω : ±300 33 Ω ≤ R : ±100 –55 to +155 Grade 0 ±5 1 to 3.3M (E24) R < 10 Ω : –100 to +600 10 Ω ≤ R < 33 Ω : ±300 33 Ω ≤ R : ±200 ERJP08 (1206) 0.66 500 1000 ±0.5, ±1 10 to 1M (E24, E96) ±100 –55 to +155 Grade 0 ±5 1 to 10M (E24) R < 10 Ω : –100 to +600 10 Ω ≤ R : ±200 ERJP14 (1210) 0.50 200 400 ±0.5, ±1 10 to 1M (E24, E96) ±100 –55 to +155 Grade 0 ±5 1 to 1M (E24) R < 10 Ω : –100 to +600 10 Ω ≤ R : ±200 Nov. 201711

Page 4

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Anti-Surge Thick Film Chip Resistors C ha ng e R at io o f R es is ta nc e V al ue C ha ng e R at io o f R es is ta nc e V al ue C ha ng e R at io o f R es is ta nc e V al ue C ha ng e R at io o f R es is ta nc e V al ue -30% -25% -15% -10% -5% 0% 5% -20% -30% -25% -15% -10% -5% 0% 5% -20% -30% -25% -15% -10% -5% 0% 5% -20% ERJP03, PA3 (0603 inch /1608 mm size) ERJP08 (1206 inch / 3216 mm size)ERJP06 (0805 inch / 2012 mm size) ERJP14 (1210 inch / 3225 mm size) -30% -25% -15% -10% -5% 0% 5% -20% ERJ6G ERJP06 ERJ3G ERJP14 ERJ14 ERJP08 ERJ8G ERJP03 ERJPA3 C ha ng e R at io o f R es is ta nc e V al ue -30% -25% -15% -10% -5% 0% 5% -20% ERJPA2 (0402 inch /1005 mm size) ERJ2G ERJPA2 10 Ω 100 Ω 1k Ω 10k Ω 100k Ω 1M Ω 10 Ω 100 Ω 1k Ω 10k Ω 100k Ω 1M Ω 10 Ω 100 Ω 1k Ω 10k Ω 100k Ω 1M Ω 10 Ω 100 Ω 1k Ω 10k Ω 100k Ω 1M Ω 10 Ω 100 Ω 1k Ω 10k Ω 100k Ω 1M Ω R=0 Ω(≤ 1.5k Ω)/150 Ω(> 1.5k Ω) C=150p F SampleE Anti-Surge Thick Film Chip Resistors(ERJP Type) Thick Film Chip Resistors(ERJ Type) ESD Characteristic 0402 inch size : E=±1k V 0603, 0805, 1206, 1210 inch size : E=±3k V Test Item Performance Requirements Test Conditions Resistance Within Specifi ed Tolerance 20 °C T. C. R. Within Specifi ed T. C. R. +25 °C/+155 °C (ERJPA2 : +125 °C) Overload ±2% Only when it is ERJP03 (D), P14 (D) : ±0.5% ERJP06 : Rated Voltag×1.77, 5 s ERJPA2, ERJPA3, ERJP08 : Rated Voltag×2.0, 5 s ERJP03, ERJP14 : Rated Voltag×2.5, 5 s Resistance to Soldering Heat D : ±0.5%, F, J : ±1% 270 °C, 10 s Rapid Change of Temperature ±1% –55 °C (30 min.) / +155 °C (30 min.) , 100 cycles High Temperature Exposure ±1% +155 °C, 1000 h Damp Heat, Steady State ±1% 60 °C, 90% to 95%RH, 1000 h Load Life in Humidity ±3%Only when it is ERJP03 (D), P14 (D) : ±1% 60 °C, 90% to 95%RH, Rated Voltage, 1.5 h ON / 0.5 h OFF cycle, 1000 h Endurance at 70 °C ±3%Only when it is ERJP03 (D), P14 (D) : ±1% 70 °C, Rated Voltage, 1.5 h ON / 0.5 h OFF cycle, 1000 h Performance Nov. 201711

Page 5

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Surface Mount Resistors Safety precautions Safety Precautions (Common precautions for Surface Mount Resistors) The following are precautions for individual products. Please also refer to the common precautions for Fixed Resistors in this catalog. 1. Take measures against mechanical stress during and after mounting of Surface Mount Resistors (hereafter called the resistors) so as not to damage their electrodes and protective coatings. Be careful not to misplace the resistors on the land patterns. Otherwise, solder bridging may occur. 2. Keep the rated power and ambient temperature within the specified derating curve. Some circuit boards, wiring patterns, temperatures of heat generated by adjacent components, or am bi ent tem per a tures can become factors in the rise of the temperature of the re sis tors, regardless of the level of power applied. Therefore, check the conditions before use and op ti mize them so as not to damage the boards and peripheral components. Make sure to contact us before using the resistors under special conditions. 3. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the operations of the resistors when installed in your products before use. Never exceed the rated power. Otherwise, the performance and/or reliability of the resistors may be impaired. 4. Before using halogen-based or other high-activity flux, check the possible effects of the flux residues on the per for mance and reliability of the resistors. 5. When soldering with a soldering iron, never touch the resistors'bodies with the tip of the soldering iron. When using a soldering iron with a high temperature tip, finish soldering as quickly as possible (within three seconds at 350 °C max.). 6. As the amount of applied solder becomes larger, the mechanical stress applied to the resistors increases, causing problems such as cracks and faulty characteristics. Avoid applying an excessive amounts of solder. 7. When the resistors' protective coatings are chipped, flawed, or removed, the characteristics of the resistors may be impaired. Take special care not to apply mechanical shock during automatic mounting or cause damage during handling of the boards with the resistors mounted. 8. Do not apply shock to the resistors or pinch them with a hard tool (e.g. pliers and tweezers). Otherwise, the resistors' protective coatings and bodies may be chipped, affecting their performance. 9. Avoid excessive bending of printed circuit boards in order to protect the resistors from abnormal stress. 10. Do not immerse the resistors in solvent for a long time. Before using solvent, carefully check the effects of im mer sion. 11. Transient voltage If there is a possibility that the transient phe nom e non (significantly high voltage ap plied in a short time) may oc cur or that a high voltage pulse may be applied, make sure to evaluate and check the char ac ter is tics of Fixed Metal (Oxide) Film Resistors mounted on your product rather than only depending on the calculated pow er limit or steady-state conditions to complete the de sign or decide to use the resistors. 12. Do not apply excessive tension to the terminals. Sep. 201402

ERJ-P6WF34R8V Reviews

Average User Rating
5 / 5 (86)
★ ★ ★ ★ ★
5 ★
77
4 ★
9
3 ★
0
2 ★
0
1 ★
0

Write a Review

Not Rated
Thanks for Your Review!

Vale*****Kelly

June 24, 2020

Diodes okay. Shipped quick and received with well - packed

Moll*****rter

June 18, 2020

Didn’t need so many but it was cheap. I did have to solder extra wire on each end to make fit better but exactly you need of your looking for this particular mod.

Kea***** Ben

June 13, 2020

Used for a solar project. Working as hoped. I'd buy again.

Skyl*****varez

June 9, 2020

This product is very easy to replace and solved my problem.

Robe*****Mathai

June 3, 2020

What I like was it was shipped fast and no damage.

Samir *****andran

June 2, 2020

Pleased with this purchase, good, quick service and item exactly as shown.

Marc*****oyal

May 28, 2020

So far so good. I need to see how they hold up.

Arel*****carthy

May 23, 2020

Items arrived well pakaged, reasonable postage and as described. Top seller

Chad*****zier

May 19, 2020

To be honest, you're beating your competitor on delivery - sometimes I request 2nd day and you still get it here overnight. Thanks!

Brist*****venport

May 14, 2020

These are the most popular variety of components of different types!

ERJ-P6WF34R8V Guarantees

Service Guarantee

Service Guarantees

We guarantee 100% customer satisfaction.

Our experienced sales team and tech support team back our services to satisfy all our customers.

Quality Guarantee

Quality Guarantees

We provide 90 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.

ERJ-P6WF34R8V Packaging

Verify Products
Customized Labels
Professional Packaging
Sealing
Packing
Insepction

ERJ-P6WF34R8V Related Products

1808J3K00151KCT 1808J3K00151KCT Knowles Syfer, CAP CER 150PF 3KV C0G/NP0 1808, 1808 (4520 Metric), ERJ View
B43505A9337M002 B43505A9337M002 EPCOS (TDK), CAP ALUM 330UF 20% 400V SNAP, Radial, Can - Snap-In, ERJ View
hotSTMUX1800LQTR STMUX1800LQTR STMicroelectronics, IC MUX/DEMUX 16X8 56QFN, 56-WFQFN Exposed Pad, ERJ View
IEG11-34065-20-UV IEG11-34065-20-UV Sensata Technologies/Airpax, CIR BRKR MAG-HYDR LEVER, -, ERJ View
RNC60H7322FSRE6 RNC60H7322FSRE6 Vishay Dale, RES 73.2K OHM 1/4W 1% AXIAL, Axial, ERJ View
CP00107K500KE663 CP00107K500KE663 Vishay Dale, RES 7.5K OHM 10W 10% AXIAL, Axial, ERJ View
1704360000 1704360000 Weidmuller, TERM BLK MIDDLE 2POS 5.1MM BLUE, -, ERJ View
518-77-420M26-001106 518-77-420M26-001106 Preci-Dip, CONN SOCKET PGA 420POS GOLD, -, ERJ View
550-10-352M26-001152 550-10-352M26-001152 Preci-Dip, BGA SOLDER TAIL, -, ERJ View
414772-3 414772-3 TE Connectivity AMP Connectors, CONN FERRULE, -, ERJ View
IQG48042A120V-1U9-R IQG48042A120V-1U9-R TDK-Lambda Americas Inc., DC/DC CONVERTER 12V 504W, 8-DIP Module, 1/4 Brick, ERJ View
EP20K60EQC208-2X EP20K60EQC208-2X Intel, IC FPGA 148 I/O 208QFP, 208-BFQFP, ERJ View
Payment Methods
Delivery Services

Quick Inquiry

ERJ-P6WF34R8V

Certified Quality

Heisener's commitment to quality has shaped our processes for sourcing, testing, shipping, and every step in between. This foundation underlies each component we sell.

ISO9001:2015, ICAS, IAF, UKAS

View the Certificates

Do you have any question about ERJ-P6WF34R8V?

+86-755-83210559 ext. 811 SalesDept@heisener.com heisener007 2354944915 Send Message

ERJ-P6WF34R8V Tags

  • ERJ-P6WF34R8V
  • ERJ-P6WF34R8V PDF
  • ERJ-P6WF34R8V datasheet
  • ERJ-P6WF34R8V specification
  • ERJ-P6WF34R8V image
  • Panasonic Electronic Components
  • Panasonic Electronic Components ERJ-P6WF34R8V
  • buy ERJ-P6WF34R8V
  • ERJ-P6WF34R8V price
  • ERJ-P6WF34R8V distributor
  • ERJ-P6WF34R8V supplier
  • ERJ-P6WF34R8V wholesales

ERJ-P6WF34R8V is Available in