Contact Us
SalesDept@heisener.com 0755-83210559 ext. 805

ISL8490EIBZ-T

hotISL8490EIBZ-T

ISL8490EIBZ-T

For Reference Only

Part Number ISL8490EIBZ-T
Manufacturer Renesas Electronics America
Description IC TXRX RS-485/422 5V 8-SOIC
Datasheet ISL8490EIBZ-T Datasheet
Package 8-SOIC (0.154", 3.90mm Width)
In Stock 885 piece(s)
Unit Price $ 0.6860 *
Lead Time Can Ship Immediately
Estimated Delivery Time Dec 4 - Dec 9 (Choose Expedited Shipping)
Request for Quotation

Part Number # ISL8490EIBZ-T (Interface - Drivers, Receivers, Transceivers) is manufactured by Renesas Electronics America and distributed by Heisener. Being one of the leading electronics distributors, we carry many kinds of electronic components from some of the world’s top class manufacturers. Their quality is guaranteed by its stringent quality control to meet all required standards.

For ISL8490EIBZ-T specifications/configurations, quotation, lead time, payment terms of further enquiries please have no hesitation to contact us. To process your RFQ, please add ISL8490EIBZ-T with quantity into BOM. Heisener.com does NOT require any registration to request a quote of ISL8490EIBZ-T.

ISL8490EIBZ-T Specifications

ManufacturerRenesas Electronics America
CategoryIntegrated Circuits (ICs) - Interface - Drivers, Receivers, Transceivers
Datasheet ISL8490EIBZ-TDatasheet
Package8-SOIC (0.154", 3.90mm Width)
Series-
TypeTransceiver
ProtocolRS422, RS485
Number of Drivers/Receivers1/1
DuplexFull
Receiver Hysteresis70mV
Data Rate10Mbps
Voltage - Supply4.5 V ~ 5.5 V
Operating Temperature-40°C ~ 85°C
Mounting TypeSurface Mount
Package / Case8-SOIC (0.154", 3.90mm Width)
Supplier Device Package8-SOIC

ISL8490EIBZ-T Datasheet

Page 1

Page 2

FN6073 Rev.4.00 July 26, 2007 ISL8488E, ISL8489E, ISL8490E, ISL8491E ±15kV ESD Protected, 5V, Low Power, High Speed and Slew Rate Limited, Full Duplex, RS-485/RS-422 Transceivers DATASHEETThe ISL8488E, ISL8489E, ISL8490E, ISL8491E devices are ESD protected, BiCMOS, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output and receiver input is protected against ±15kV ESD strikes, without latch-up. Unlike competitive versions, these Intersil devices are specified for 10% tolerance supplies (4.5V to 5.5V). These devices are configured for full duplex (separate Rx input and Tx output pins) applications, so they are ideal for RS-422 networks requiring high ESD tolerance on the bus pins. The ISL8488E, ISL8490E are 8 Ld versions without Rx and Tx output enables. The other two versions include Rx and Tx output enable pins in a standard 14 Ld pinout. The ISL8488E, ISL8489E utilize slew rate limited drivers which reduce EMI, and minimize reflections from improperly terminated transmission lines, or unterminated stubs in multidrop and multipoint applications. Data rates up to 10Mbps are achievable by using the ISL8490E, ISL8491E, which feature higher slew rates. The devices present a “single unit load” to the RS-485 bus, which allows a total of 32 transmitters and receivers on the network. For “1/8 unit load” versions (256 devices on the bus), please refer to the ISL4489E, ISL4491E data sheet. Receiver (Rx) inputs feature a “fail-safe if open” design, which ensures a logic high Rx output if Rx inputs are floating. Driver (Tx) outputs are short circuit protected, even for voltages exceeding the power supply voltage. Additionally, on-chip thermal shutdown circuitry disables the Tx outputs to prevent damage if power dissipation becomes excessive. Features • RS-485 I/O Pin ESD Protection 15kV HBM - Class 3 ESD Level on all Other Pins . . . . . . >7kV HBM • High Data Rates (ISL8490E, ISL8491E) . . up to 10Mbps • Slew Rate Limited for Error Free Data Transmission (ISL8488E, ISL8489E) • Single Unit Load Allows up to 32 Devices on the Bus (See ISL4489E, ISL4491E for 256 Devices on Bus) • Low Quiescent Current: - 120µA (ISL8488E) - 140µA (ISL8489E) - 370µA (ISL8490E, ISL8491E) • -7V to +12V Common Mode Input Voltage Range • Three-State Rx and Tx Outputs (Except ISL8488E, ISL8490E) • Full Duplex Pinout • Operates from a Single +5V Supply (10% Tolerance) • Current Limiting and Thermal Shutdown for Driver Overload Protection • Pb-Free Plus Anneal Available (RoHS Compliant) Applications • Factory Automation • Security Networks • Building Environmental Control Systems • Industrial/Process Control Networks • Level Translators (e.g., RS-232 to RS-422) • RS-232 “Extension Cords” TABLE 1. SUMMARY OF FEATURES PART NUMBER HALF/FULL DUPLEX HIGH ESD? NO. OF DEVICES ALLOWED ON BUS DATA RATE (Mbps) SLEW-RATE LIMITED? RECEIVER/ DRIVER ENABLE? QUIESCENT ICC (A) PIN COUNT ISL8488E Full Yes 32 0.25 Yes No 120 8 ISL8489E Full Yes 32 0.25 Yes Yes 140 14 ISL8490E Full Yes 32 10 No No 370 8 ISL8491E Full Yes 32 10 No Yes 370 14FN6073 Rev.4.00 Page 1 of 13 July 26, 2007

Page 3

ISL8488E, ISL8489E, ISL8490E, ISL8491EPinouts ISL8488E, ISL8490E (8 LD SOIC) TOP VIEW ISL8489E, ISL8491E (14 LD SOIC) TOP VIEW Truth Tables (For ISL8488E, ISL8490E, only the DE = 1 and RE = 0 entries are valid) VCC RO DI GND 1 2 3 4 8 7 6 5 A B Z Y D R NC RO RE DE DI GND GND VCC NC A B Z Y NC 1 2 3 4 5 6 7 14 13 12 11 10 9 8 D R Ordering Information PART NUMBER (Note 1) PART MARKING TEMP. RANGE (°C) PACKAGE PKG. DWG. # ISL8488EIB 8488 EIB -40 to +85 8 Ld SOIC M8.15 ISL8488EIBZA (Note 2) 8488 EIBZ -40 to +85 8 Ld SOIC (Pb-free) M8.15 ISL8489EIB ISL8489EIB -40 to +85 14 Ld SOIC M14.15 ISL8489EIBZ (Note 2) 8489EIBZ -40 to +85 14 Ld SOIC (Pb-free) M14.15 ISL8490EIBZ (Note 2) 8490E IBZ -40 to +85 8 Ld SOIC (Pb-free) M8.15 ISL8491EIB ISL8491EIB -40 to +85 14 Ld SOIC M14.15 ISL8491EIBZ (Note 2) 8491EIBZ -40 to +85 14 Ld SOIC (Pb-free) M14.15 NOTES: 1. Add “-T” suffix for tape and reel. Please refer to TB347 for details on reel specifications. 2. Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. TRANSMITTING INPUTS OUTPUTS RE DE DI Z Y X 1 1 0 1 X 1 0 1 0 X 0 X High-Z High-Z RECEIVING INPUTS OUTPUT RE DE A-B RO 0 X  +0.2V 1 0 X  -0.2V 0 0 X Inputs Open 1 1 X X High-Z Pin Descriptions PIN FUNCTION RO Receiver output: If A > B by at least 0.2V, RO is high; If A < B by 0.2V or more, RO is low; RO = High if A and B are unconnected (floating). RE Receiver output enable. RO is enabled when RE is low; RO is high impedance when RE is high. DE Driver output enable. The driver outputs, Y and Z, are enabled by bringing DE high. They are high impedance when DE is low. DI Driver input. A low on DI forces output Y low and output Z high. Similarly, a high on DI forces output Y high and output Z low. GND Ground connection. A 15kV HBM ESD Protected, Non-inverting receiver input. B 15kV HBM ESD Protected, Inverting receiver input. Y 15kV HBM ESD Protected, Non-inverting driver output. Z 15kV HBM ESD Protected, Inverting driver output. VCC System power supply input (4.5V to 5.5V). NC No Connection.FN6073 Rev.4.00 Page 2 of 13 July 26, 2007

Page 4

ISL8488E, ISL8489E, ISL8490E, ISL8491ETypical Operating Circuit ISL8488E, ISL8490E ISL8489E, ISL8491E 0.1µF + D R 8 7 6 5 1 2 3 4 VCC GND RO DI A B Y Z +5V 0.1µF + D R8 7 6 5 1 2 3 4 VCC GND RO DI A B Y Z +5V RT RT 0.1µF + D R 12 11 10 9 14 2 3 4 5 6, 7 VCC GND RO RE DE DI A B Y Z +5V 0.1µF + D R12 11 10 9 14 2 3 4 5 6, 7 VCC GND RO RE DE DI A B Y Z +5V RT RTFN6073 Rev.4.00 Page 3 of 13 July 26, 2007

Page 5

ISL8488E, ISL8489E, ISL8490E, ISL8491EAbsolute Maximum Ratings Thermal Information VCC to GND. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7V Input Voltages DI, DE, RE . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to (VCC + 0.5V) Input/Output Voltages A, B, Y, Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -8V to + 12.5V RO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5V to (VCC + 0.5V) Short Circuit Duration Y, Z . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Continuous ESD Rating . . . . . . . . . . . . . . . . . . . . . . . . . See Specification Table Thermal Resistance (Typical) JA (°C/W) 8 Ld SOIC Package (Note 3) . . . . . . . . . . . . . . . . . . 170 14 Ld SOIC Package (Note 3) . . . . . . . . . . . . . . . . . 128 Maximum Junction Temperature (Plastic Package) . . . . . . +150°C Maximum Storage Temperature Range . . . . . . . . . . -65°C to +150°C Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below http://www.intersil.com/pbfree/Pb-FreeReflow.asp Operating Conditions Temperature Range. . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +85°C CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty. NOTE: 3. JA is measured with the component mounted on a low effective thermal conductivity test board in free air. See Tech Brief TB379 for details. Electrical Specifications Test Conditions: VCC = 4.5V to 5.5V; Unless Otherwise Specified. Typicals are at VCC = 5V, TA = +25°C, (Note 4). PARAMETER SYMBOL TEST CONDITIONS TEMP (°C) MIN (NOTE 9) TYP MAX (NOTE 9) UNITS DC CHARACTERISTICS Driver Differential VOUT (no load) VOD1 Full - - VCC V Driver Differential VOUT (with load) VOD2 R = 50 (RS-422) (Figure 1) Full 2 3 - V R = 27 (RS-485) (Figure 1) Full 1.5 2.3 5 V Change in Magnitude of Driver Differential VOUT for Complementary Output States VOD R = 27 or 50 (Figure 1) Full - 0.01 0.2 V Driver Common-Mode VOUT VOC R = 27 or 50 (Figure 1) Full - - 3 V Change in Magnitude of Driver Common-Mode VOUT for Complementary Output States VOC R = 27 or 50 (Figure 1) Full - 0.01 0.2 V Logic Input High Voltage VIH DE, DI, RE Full 2 - - V Logic Input Low Voltage VIL DE, DI, RE Full 0.8 - - V Logic Input Current IIN1 DI Full -2 - 2 A DE, RE (Note 8) Full -40 - 40 A Input Current (A, B) (Note 7) IIN2 DE = 0V, VCC = 0V or 4.5V to 5.5V VIN = 12V Full - - 1 mA VIN = -7V Full -0.8 - - mA Driver Three-State Output Current (Y, Z) IOZD DE = 0V, -7V  VO  12V (Note 8) Full -100 - 100 A Receiver Differential Threshold Voltage VTH -7V  VCM  12V Full -0.2 - 0.2 V Receiver Input Hysteresis VTH VCM = 0V 25 - 70 - mV Receiver Output High Voltage VOH IO = -4mA, VID = 200mV Full 3.5 - - V Receiver Output Low Voltage VOL IO = 4mA, VID = 200mV Full - - 0.4 V Receiver Three-State Output Current IOZR RE = VCC, 0.4V  VO  2.4V (Note 8) Full - - 1 A Receiver Input Resistance RIN -7V  VCM  12V Full 12 - - k No-Load Supply Current (Note 5) ICC ISL8488E, DI = 0V or VCC Full - 120 140 A ISL8489E, DE, DI, RE = 0V or VCC Full - 140 190 A ISL8490E/ISL8491E, DE, DI, RE = 0V or VCC Full - 370 460 A Driver Short-Circuit Current, VO = High or Low IOSD1 DE = VCC, -7V  VY or VZ  12V (Note 6) Full 35 - 250 mAFN6073 Rev.4.00 Page 4 of 13 July 26, 2007

Page 6

ISL8488E, ISL8489E, ISL8490E, ISL8491EReceiver Short-Circuit Current IOSR 0V  VO  VCC Full 7 - 85 mA SWITCHING CHARACTERISTICS (ISL8488E, ISL8489E) Driver Input to Output Delay tPLH, tPHL RDIFF = 54, CL = 100pF (Figure 2) Full 250 400 2000 ns Driver Output Skew tSKEW RDIFF = 54, CL = 100pF (Figure 2) Full - 160 800 ns Driver Differential Rise or Fall Time tR, tF RDIFF = 54, CL = 100pF (Figure 2) Full 250 600 2000 ns Driver Enable to Output High tZH CL = 100pF, SW = GND (Figure 3, Note 8) Full 250 1000 2000 ns Driver Enable to Output Low tZL CL = 100pF, SW = VCC (Figure 3, Note 8) Full 250 860 2000 ns Driver Disable from Output High tHZ CL = 15pF, SW = GND (Figure 3, Note 8) Full 300 660 3000 ns Driver Disable from Output Low tLZ CL = 15pF, SW = VCC (Figure 3, Note 8) Full 300 640 3000 ns Receiver Input to Output Delay tPLH, tPHL (Figure 4) Full 250 500 2000 ns Receiver Skew | tPLH - tPHL | tSKD (Figure 4) 25 - 60 - ns Receiver Enable to Output High tZH CL = 15pF, SW = GND (Figure 5, Note 8) Full - 10 50 ns Receiver Enable to Output Low tZL CL = 15pF, SW = VCC (Figure 5, Note 8) Full - 10 50 ns Receiver Disable from Output High tHZ CL = 15pF, SW = GND (Figure 5, Note 8) Full - 10 50 ns Receiver Disable from Output Low tLZ CL = 15pF, SW = VCC (Figure 5, Note 8) Full - 10 50 ns Maximum Data Rate fMAX Full 250 - - kbps SWITCHING CHARACTERISTICS (ISL8490E, ISL8491E) Driver Input to Output Delay tPLH, tPHL RDIFF = 54, CL = 100pF (Figure 2) Full 13 24 50 ns Driver Output Skew tSKEW RDIFF = 54, CL = 100pF (Figure 2) Full - 3 10 ns Driver Differential Rise or Fall Time tR, tF RDIFF = 54, CL = 100pF (Figure 2) Full 5 12 25 ns Driver Enable to Output High tZH CL = 100pF, SW = GND (Figure 3, Note 8) Full - 14 70 ns Driver Enable to Output Low tZL CL = 100pF, SW = VCC (Figure 3, Note 8) Full - 14 70 ns Driver Disable from Output High tHZ CL = 15pF, SW = GND (Figure 3, Note 8) Full - 44 70 ns Driver Disable from Output Low tLZ CL = 15pF, SW = VCC (Figure 3, Note 8) Full - 21 70 ns Receiver Input to Output Delay tPLH, tPHL (Figure 4) Full 30 90 150 ns Receiver Skew | tPLH - tPHL | tSKD (Figure 4) 25 - 5 - ns Receiver Enable to Output High tZH CL = 15pF, SW = GND (Figure 5, Note 8) Full - 9 50 ns Receiver Enable to Output Low tZL CL = 15pF, SW = VCC (Figure 5, Note 8) Full - 9 50 ns Receiver Disable from Output High tHZ CL = 15pF, SW = GND (Figure 5, Note 8) Full - 9 50 ns Receiver Disable from Output Low tLZ CL = 15pF, SW = VCC (Figure 5, Note 8) Full - 9 50 ns Maximum Data Rate fMAX Full 10 - - Mbps ESD PERFORMANCE RS-485 Pins (A, B, Y, Z) Human Body Model 25 - 15 - kV All Other Pins 25 - >7 - kV NOTES: 4. All currents into device pins are positive; all currents out of device pins are negative. All voltages are referenced to device ground unless otherwise specified. 5. Supply current specification is valid for loaded drivers when DE = 0V. 6. Applies to peak current. See “Typical Performance Curves” on page 9 for more information. 7. Devices meeting these limits are denoted as “single unit load (1 UL)” transceivers. The RS-485 standard allows up to 32 Unit Loads on the bus. 8. Not applicable to the ISL8488E, ISL8490E. 9. Parts are 100% tested at +25°C. Over-temperature limits established by characterization and are not production tested. Electrical Specifications Test Conditions: VCC = 4.5V to 5.5V; Unless Otherwise Specified. Typicals are at VCC = 5V, TA = +25°C, (Note 4). (Continued) PARAMETER SYMBOL TEST CONDITIONS TEMP (°C) MIN (NOTE 9) TYP MAX (NOTE 9) UNITSFN6073 Rev.4.00 Page 5 of 13 July 26, 2007

Page 7

ISL8488E, ISL8489E, ISL8490E, ISL8491ETest Circuits and Waveforms FIGURE 1. DRIVER VOD AND VOC FIGURE 2A. TEST CIRCUIT FIGURE 2B. MEASUREMENT POINTS FIGURE 2. DRIVER PROPAGATION DELAY AND DIFFERENTIAL TRANSITION TIMES D DE DI VCC VOD VOC R R Z Y D DE DI VCC SIGNAL GENERATOR CL = 100pF RDIFF Z Y CL = 100pF OUT (Y) 3V 0V tPLH 1.5V1.5V VOH VOL 50% 50% tPHL OUT (Z) tPHL VOH VOL 50% 50% tPLH DIFF OUT (Y - Z) tR +VOD -VOD 90% 90% tF 10% 10% DI SKEW = |tPLH (Y or Z) - tPHL (Z or Y)|FN6073 Rev.4.00 Page 6 of 13 July 26, 2007

Page 8

ISL8488E, ISL8489E, ISL8490E, ISL8491EFIGURE 3A. TEST CIRCUIT FIGURE 3B. MEASUREMENT POINTS FIGURE 3. DRIVER ENABLE AND DISABLE TIMES (EXCLUDING ISL8488E, ISL8490E) FIGURE 4A. TEST CIRCUIT FIGURE 4B. MEASUREMENT POINTS FIGURE 4. RECEIVER PROPAGATION DELAY FIGURE 5A. TEST CIRCUIT FIGURE 5B. MEASUREMENT POINTS FIGURE 5. RECEIVER ENABLE AND DISABLE TIMES (EXCLUDING ISL8488E, ISL8490E) Test Circuits and Waveforms (Continued) D DE DI CL 500Z Y VCC GNDSW PARAMETER OUTPUT RE DI SW CL (pF) tHZ Y/Z X 1/0 GND 15 tLZ Y/Z X 0/1 VCC 15 tZH Y/Z X 1/0 GND 100 tZL Y/Z X 0/1 VCC 100 SIGNAL GENERATOR OUT (Y, Z) 3V 0V 1.5V1.5V VOH 0V 2.3V VOH - 0.5V tHZ OUT (Y, Z) VCC VOL 2.3V VOL + 0.5V tLZ DE OUTPUT HIGH OUTPUT LOW tZL tZH SIGNAL GENERATOR R RO RE A B +1.5V 15pF RO 3V 0V tPLH 1.5V1.5V VCC 0V 50% 50% tPHL A 1k VCC GNDSW PARAMETER DE A SW tHZ X +1.5V GND tLZ X -1.5V VCC tZH X +1.5V GND tZL X -1.5V VCC SIGNAL GENERATOR R RO RE A B 15pF RO 3V 0V 1.5V1.5V VOH 0V 1.5V VOH - 0.5V tHZ RO VCC VOL 1.5V VOL + 0.5V tLZ RE OUTPUT HIGH OUTPUT LOW tZL tZHFN6073 Rev.4.00 Page 7 of 13 July 26, 2007

Page 9

ISL8488E, ISL8489E, ISL8490E, ISL8491EApplication Information RS-485 and RS-422 are differential (balanced) data transmission standards for use in long haul or noisy environments. RS-422 is a subset of RS-485, so RS-485 transceivers are also RS-422 compliant. RS-422 is a point-to-multipoint (multidrop) standard, which allows only one driver and up to 10 (assuming one unit load devices) receivers on each bus. RS-485 is a true multipoint standard, which allows up to 32 one unit load devices (any combination of drivers and receivers) on each bus. To allow for multipoint operation, the RS-485 specification requires that drivers must handle bus contention without sustaining any damage. Another important advantage of RS-485 is the extended common mode range (CMR), which specifies that the driver outputs and receiver inputs withstand signals that range from +12V to -7V. RS-422 and RS-485 are intended for runs as long as 4000’, so the wide CMR is necessary to handle ground potential differences, as well as voltages induced in the cable by external fields. Receiver Features These devices utilize a differential input receiver for maximum noise immunity and common mode rejection. Input sensitivity is ±200mV, as required by the RS-422 and RS-485 specifications. Receiver input resistance surpasses the RS-422 specification of 4k, and meets the RS-485 “Unit Load” requirement of 12k minimum. Receiver inputs function with common mode voltages as great as 7V outside the power supplies (i.e., +12V and -7V), making them ideal for long networks where induced voltages are a realistic concern. All the receivers include a “fail-safe if open” function that guarantees a high level receiver output if the receiver inputs are unconnected (floating). Receivers easily meet the data rate supported by the corresponding driver. ISL8489E/ISL8491E receiver outputs are three-statable via the active low RE input. Driver Features The RS-485/RS-422 driver is a differential output device that delivers at least 1.5V across a 54 load (RS-485), and at least 2V across a 100 load (RS-422). The drivers feature low propagation delay skew to maximize bit width, and to minimize EMI. ISL8489E/ISL8491E driver outputs are three- statable via the active high DE input. The ISL8488E/ISL8489E driver outputs are slew rate limited to further reduce EMI, and to minimize reflections in unterminated or improperly terminated networks. Data rates on these slew rate limited versions are a maximum of 250kbps. Outputs of ISL8490E/ISL8491E drivers are not limited, so faster output transition times allow data rates of at least 10Mbps. Data Rate, Cables, and Terminations Twisted pair is the cable of choice for RS-485/RS-422 networks. Twisted pair cables tend to pick up noise and other electromagnetically induced voltages as common mode signals, which are effectively rejected by the differential receivers in these ICs. RS-485/RS-422 are intended for network lengths up to 4000’, but the maximum system data rate decreases as the transmission length increases. Devices operating at 10Mbps are limited to lengths of a few hundred feet, while the 250kbps versions can operate at full data rates with lengths in excess of 1000’. Proper termination is imperative, when using the 10Mbps devices, to minimize reflections. Short networks using the 250kbps versions need not be terminated, but, terminations are recommended unless power dissipation is an overriding concern. In point-to-point, or point-to-multipoint (single driver on bus) networks, the main cable should be terminated in its characteristic impedance (typically 120) at the end farthest from the driver. In multi-receiver applications, stubs connecting receivers to the main cable should be kept as short as possible. Multipoint (multi-driver) systems require that the main cable be terminated in its characteristic impedance at both ends. Stubs connecting a transceiver to the main cable should be kept as short as possible. Built-In Driver Overload Protection As stated previously, the RS-485 specification requires that drivers survive worst case bus contentions undamaged. The ISL84xxE devices meet this requirement via driver output short circuit current limits, and on-chip thermal shutdown circuitry. The driver output stages incorporate short circuit current limiting circuitry which ensures that the output current never exceeds the RS-485 specification, even at the common mode voltage range extremes. Additionally, these devices utilize a foldback circuit which reduces the short circuit current, and thus the power dissipation, whenever the contending voltage exceeds either supply. In the event of a major short circuit condition, ISL84xxE devices also include a thermal shutdown feature that disables the drivers whenever the die temperature becomes excessive. This eliminates the power dissipation, allowing the die to cool. The drivers automatically reenable after the die temperature drops about 15°. If the contention persists, the thermal shutdown/reenable cycle repeats until the fault is cleared. Receivers stay operational during thermal shutdown. ESD Protection All pins on these devices include class 3 Human Body Model (HBM) ESD protection structures, but the RS-485 pins (driver outputs and receiver inputs) incorporate advanced structures allowing them to survive ESD events in excess of FN6073 Rev.4.00 Page 8 of 13 July 26, 2007

Page 10

ISL8488E, ISL8489E, ISL8490E, ISL8491E±15kV HBM. The RS-485 pins are particularly vulnerable to ESD damage because they typically connect to an exposed port on the exterior of the finished product. Simply touching the port pins, or connecting a cable, can cause an ESD event that might destroy unprotected ICs. These new ESD structures protect the device whether or not it is powered up, protect without allowing any latch-up mechanism to activate, and without degrading the RS-485 common mode range of -7V to +12V. This built-in ESD protection eliminates the need for board level protection structures (e.g., transient suppression diodes), and the associated, undesirable capacitive load they present. Typical Performance Curves VCC = 5V, TA = +25°C; Unless Otherwise Specified. FIGURE 6. DRIVER OUTPUT CURRENT vs DIFFERENTIAL OUTPUT VOLTAGE FIGURE 7. DRIVER DIFFERENTIAL OUTPUT VOLTAGE vs TEMPERATURE FIGURE 8. DRIVER OUTPUT CURRENT vs SHORT CIRCUIT VOLTAGE FIGURE 9. SUPPLY CURRENT vs TEMPERATURE DIFFERENTIAL OUTPUT VOLTAGE (V) D R IV E R O U T P U T C U R R E N T ( m A ) 0 1 2 3 4 5 0 10 20 30 40 50 60 70 80 90 -40 0 50 85 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 TEMPERATURE (°C) D IF F E R E N T IA L O U T P U T V O LT A G E ( V ) -25 25 75 RDIFF = 54 RDIFF = 100 OUTPUT VOLTAGE (V) -7 -6 -4 -2 0 2 4 6 8 10 12 O U T P U T C U R R E N T ( m A ) -60 -40 -20 0 20 40 60 80 100 120 140 160 -80 -100 -120 Y OR Z = HIGH Y OR Z = LOW ISL8490E/ISL8491E ISL8490E/ISL8491E ISL8488E/ISL8489E ISL8488E/ISL8489E -40 0 50 85 TEMPERATURE (°C) I C C ( µ A ) -25 25 75 50 100 150 200 250 300 350 400 ISL8490E/ISL8491E, DE = X, RE = X ISL8489E, DE = X, RE = X ISL8488EFN6073 Rev.4.00 Page 9 of 13 July 26, 2007

ISL8490EIBZ-T Reviews

Average User Rating
5 / 5 (138)
★ ★ ★ ★ ★
5 ★
124
4 ★
14
3 ★
0
2 ★
0
1 ★
0

Write a Review

Not Rated
Thanks for Your Review!

Camil*****ffman

November 11, 2020

The order has arrived ahead of time, we appreciate it very much!! Thanks

Juliet*****rington

November 8, 2020

Great seller, would recommend buying from. , good communication and problem solving

Cayd*****ischer

November 6, 2020

Purchasing from Heisener means the real part is obtained no worried for product quality.

Bran***** Varma

November 4, 2020

No problem in making an order and will see how the shipping goes.

Cal*****Shah

October 26, 2020

Everything perfect. Great seller.

Gra***** Bala

October 26, 2020

Good quality, buy back and then use, with the newly bought hard disk, very stable, at any time you can check things, not occupy space, very convenient.

Deand*****jumdar

October 23, 2020

They are great as I need, I give 5 stars.

Grego*****ndoza

October 21, 2020

Bought these to help prevent solar panels from feeding back. Works great and doesn't get as hot.

Kir*****ole

October 20, 2020

I was able to make my list of needed parts and use suggested relative selection. The five stars represent the fact they show inventory quantity. So far i'm happy.

ISL8490EIBZ-T Guarantees

Service Guarantee

Service Guarantees

We guarantee 100% customer satisfaction.

Our experienced sales team and tech support team back our services to satisfy all our customers.

Quality Guarantee

Quality Guarantees

We provide 90 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.

ISL8490EIBZ-T Packaging

Verify Products
Customized Labels
Professional Packaging
Sealing
Packing
Insepction

ISL8490EIBZ-T Related Products

SIT1602BI-11-33S-19.200000G SIT1602BI-11-33S-19.200000G SiTIME, -40 TO 85C, 2520, 20PPM, 3.3V, 1, -, - View
2220J0630122KCR 2220J0630122KCR Knowles Syfer, CAP CER 2220, 2220 (5750 Metric), - View
MTZJT-773.0B MTZJT-773.0B Rohm Semiconductor, DIODE ZENER 3V 500MW DO34, DO-204AG, DO-34, Axial, - View
CD0603-Z16 CD0603-Z16 Bourns Inc., DIODE ZENER 16V 150MW 0603, 0603 (1608 Metric), - View
hotST7FLITE15M6TR ST7FLITE15M6TR STMicroelectronics, IC MCU 8BIT 4KB FLASH 20SOIC, 20-SOIC (0.295", 7.50mm Width), - View
LFE2M50E-5FN484I LFE2M50E-5FN484I Lattice Semiconductor Corporation, IC FPGA 270 I/O 484FBGA, 484-BBGA, - View
M2022TXG30-DB M2022TXG30-DB NKK Switches, SWITCH ROCKER DPDT 0.4VA 28V, -, - View
R99-11 FOR MY(NAMEPLATE) R99-11 FOR MY(NAMEPLATE) Omron Automation and Safety, NAMEPLATE FOR MY, -, - View
BCS-141-L-D-TE-002 BCS-141-L-D-TE-002 Samtec Inc., BOX CONNECTOR SOCKET STRIP, -, - View
8D025F08PC 8D025F08PC Souriau, 8D 8C 8#8 PIN RECP, -, - View
PJA600F-5-W PJA600F-5-W Cosel USA, Inc., SWITCHING POWER SUPPLIES 600W 5V, -, - View
SI5345B-D10101-GM SI5345B-D10101-GM Silicon Labs, IC CLOCK MULTIPLIER ATTENUATOR, -, - View
Payment Methods
Delivery Services

Quick Inquiry

ISL8490EIBZ-T

Certified Quality

Heisener's commitment to quality has shaped our processes for sourcing, testing, shipping, and every step in between. This foundation underlies each component we sell.

ISO9001:2015, ICAS, IAF, UKAS

View the Certificates

Do you have any question about ISL8490EIBZ-T?

0755-83210559 ext. 805 SalesDept@heisener.com heisener007 3008774228 Send Message

Featured Products

L6563H

IC PFC CTRLR TRANSITION 16SOIC

3314G-1-103E

TRIMMER 10K OHM 0.25W SMD

MT41K256M16HA-125 AIT:E

IC SDRAM 4GBIT 800MHZ 96FBGA

MMBT4403LT1G

TRANS PNP 40V 0.6A SOT23

GP1S094HCZ0F

SENSOR OPTO SLOT 3MM TRANS THRU

ACSL-6410-00TE

OPTOISO 2.5KV 4CH OPEN COLL 16SO

S34ML01G200TFI000

IC FLASH 1GBIT 25NS 48TSOP

CAT24C256WI-GT3

IC EEPROM 256KBIT 400KHZ 8SOIC

MX25L12835FM2I-10G

IC FLASH 128MBIT 104MHZ 8SOP

APT1608F3C

EMITTER IR 940NM 50MA 603

View More >>

ISL8490EIBZ-T Tags

  • ISL8490EIBZ-T
  • ISL8490EIBZ-T PDF
  • ISL8490EIBZ-T datasheet
  • ISL8490EIBZ-T specification
  • ISL8490EIBZ-T image
  • Renesas Electronics America
  • Renesas Electronics America ISL8490EIBZ-T
  • buy ISL8490EIBZ-T
  • ISL8490EIBZ-T price
  • ISL8490EIBZ-T distributor
  • ISL8490EIBZ-T supplier
  • ISL8490EIBZ-T wholesales

ISL8490EIBZ-T is Available in