LM324MX

Page 1

Page 2

To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. Is Now Part of ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

Page 3

©2012 Fairchild Semiconductor Corporation www.fairchildsemi.com Rev. 1.0.9 Features • Internally Frequency Compensated for Unity Gain • Large DC Voltage Gain: 100dB • Wide Power Supply Range: LM324/LM324A : 3V~32V (or ±1.5 ~ 16V) LM2902/LM2902A: 3V~26V (or ±1.5V ~ 13V) • Input Common Mode Voltage Range Includes Ground • Large Output Voltage Swing: 0V to VCC -1.5V • Power Drain Suitable for Battery Operation Description The LM324/LM324A, LM2902/LM2902A consist of four independent, high gain, internally frequency compen- sated operational amplifiers which were designed spe- cifically to operate from a single power supply over a wide voltage range. operation from split power supplies is also possible so long as the difference between the two supplies is 3 volts to 32 volts. Application areas include transducer amplifier, DC gain blocks and all the conventional OP Amp circuits which now can be easily implemented in single power supply systems. 14-SOP 14-DIP 1 1 Internal Block Diagram 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 2 3 4 + _ + + + _ _ _ OUT4 GND OUT2 OUT1 OUT3 IN4 (-) IN3 (-) IN4 (+) IN3 (+) IN1 (-) IN1 (+) IN2 (+) IN2 (-) VCC LM324/LM324A, LM2902/LM2902A Quad Operational Amplifier

Page 4

LM324/LM324A, LM2902/LM2902A 2 Schematic Diagram (One Section Only) Absolute Maximum Ratings Thermal Data Parameter Symbol LM324/LM324A LM2902/LM2902A Unit Power Supply Voltage VCC ±16 or 32 ±13 or 26 V Differential Input Voltage VI(DIFF) 32 26 V Input Voltage VI -0.3 to +32 -0.3 to +26 V Output Short Circuit to GND Vcc≤15V, TA=25°C(one Amp) - Continuous Continuous - Power Dissipation, TA=25°C 14-DIP 14-SOP PD 1310 640 1310 640 mW Operating Temperature Range TOPR 0 ~ +70 -40 ~ +85 °C Storage Temperature Range TSTG -65 ~ +150 -65 ~ +150 °C Parameter Symbol Value Unit Thermal Resistance Junction-Ambient Max. 14-DIP 14-SOP Rθja 95 195 °C/W Q8 Q7 Q6Q5 Q4 Q3Q2 Q1 Q9 Q10 Q11 Q12 Q14 Q15 Q16 Q18 Q19 Q20 R2 Q21 C1 R1 GND OUTPUT IN(+) IN(-) VCC Q13 Q17

Page 5

LM324/LM324A, LM2902/LM2902A 3 Electrical Characteristics (VCC = 5.0V, VEE = GND, TA = 25°C, unless otherwise specified) Note : 1. VCC=30V for LM324 , VCC = 26V for LM2902 2. This parameter, although guaranteed, is not 100% tested in production. Parameter Symbol Conditions LM324 LM2902 Unit Min. Typ. Max. Min. Typ. Max. Input Offset Voltage VIO VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω (Note1) - 1.5 7.0 - 1.5 7.0 mV Input Offset Current IIO VCM = 0V - 3.0 50 - 3.0 50 nA Input Bias Current IBIAS VCM = 0V - 40 250 - 40 250 nA Input Common-Mode Voltage Range VI(R) Note1 0 - VCC -1.5 0 - VCC -1.5 V Supply Current ICC RL = ∞,VCC = 30V (LM2902,VCC=26V) - 1.0 3 - 1.0 3 mA RL = ∞,VCC = 5V - 0.7 1.2 - 0.7 1.2 mA Large Signal Voltage Gain GV VCC = 15V,RL=2kΩ VO(P) = 1V to 11V 25 100 - 25 100 - V/mV Output Voltage Swing VO(H) Note1 RL = 2kΩ 26 - - 22 - - V RL=10kΩ 27 28 - 23 24 - V VO(L) VCC = 5V, RL=10kΩ - 5 20 - 5 100 mV Common-Mode Rejection Ratio CMRR - 65 75 - 50 75 - dB Power Supply Rejection Ratio PSRR - 65 100 - 50 100 - dB Channel Separation CS f = 1kHz to 20kHz (Note2) - 120 - - 120 - dB Short Circuit to GND ISC VCC = 15V - 40 60 - 40 60 mA Output Current ISOURCE VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V 20 40 - 20 40 - mA ISINK VI(+) = 0V, VI(-) = 1V VCC = 15V, VO(P) = 2V 10 13 - 10 13 - mA VI(+) = 0V, VI(-) = 1V VCC = 15V, VO(R) = 200mV 12 45 - - - - μA Differential Input Voltage VI(DIFF) - - - VCC - - VCC V

Page 6

LM324/LM324A, LM2902/LM2902A 4 Electrical Characteristics (Continued) (VCC = 5.0V, VEE = GND, unless otherwise specified) The following specification apply over the range of 0°C ≤ TA ≤ +70°C for the LM324 ; and the -40°C ≤ TA ≤ +85°C for the LM2902 Note: 1. VCC=30V for LM324 , VCC = 26V for LM2902 2. These parameters, although guaranteed, are not 100% tested in production. Parameter Symbol Conditions LM324 LM2902 Unit Min. Typ. Max. Min. Typ. Max. Input Offset Voltage VIO VICM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω (Note1) - - 9.0 - - 10.0 mV Input Offset Voltage Drift ΔVIO/ΔT RS = 0Ω (Note2) - 7.0 - - 7.0 - μV/°C Input Offset Current IIO VCM = 0V - - 150 - - 200 nA Input Offset Current Drift ΔIIO/ΔT RS = 0Ω (Note2) - 10 - - 10 - pA/°C Input Bias Current IBIAS VCM = 0V - - 500 - - 500 nA Input Common-Mode Voltage Range VI(R) Note1 0 - VCC -2.0 0 - VCC -2.0 V Large Signal Voltage Gain GV VCC = 15V, RL = 2.0kΩ VO(P) = 1V to 11V 15 - - 15 - - V/mV Output Voltage Swing VO(H) Note1 RL=2kΩ 26 - - 22 - - V RL=10kΩ 27 28 - 23 24 - V VO(L) VCC = 5V, RL=10kΩ - 5 20 - 5 100 mV Output Current ISOURCE VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V 10 20 - 10 20 - mA ISINK VI(+) = 0V, VI(-) = 1V VCC = 15V, VO(P) = 2V 5 8 - 5 8 - mA Differential Input Voltage VI(DIFF) - - - VCC - - VCC V

Page 7

LM324/LM324A, LM2902/LM2902A 5 Electrical Characteristics (Continued) (VCC = 5.0V, VEE = GND, TA = 25°C, unless otherwise specified) Note: 1. VCC=30V for LM324A ; VCC=26V for LM2902A 2. This parameter, although guaranteed, is not 100% tested in production. Parameter Symbol Conditions LM324A LM2902A Unit Min. Typ. Max. Min. Typ. Max. Input Offset Voltage VIO VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω (Note1) - 1.5 3.0 - 1.5 2.0 mV Input Offset Current IIO VCM = 0V - 3.0 30 - 3.0 50 nA Input Bias Current IBIAS VCM = 0V - 40 100 - 40 250 nA Input Common-Mode Voltage Range VI(R) VCC = 30V 0 - VCC -1.5 0 - VCC -1.5 V Supply Current ICC VCC = 30V, RL = ∞ (LM2902,VCC=26V) - 1.5 3 - 1.0 3 mA VCC = 5V, RL = ∞ - 0.7 1.2 - 0.7 1.2 mA Large Signal Voltage Gain GV VCC = 15V, RL= 2kΩ VO(P) = 1V to 11V 25 100 - 25 100 - V/mV Output Voltage Swing VO(H) Note1 RL = 2kΩ 26 - - 22 - - V RL = 10kΩ 27 28 - 23 24 - V VO(L) VCC = 5V, RL=10kΩ - 5 20 - 5 100 mV Common-Mode Rejection Ratio CMRR - 65 85 - 50 75 - dB Power Supply Rejection Ratio PSRR - 65 100 - 50 100 - dB Channel Separation CS f = 1kHz to 20kHz (Note2) - 120 - - 120 - dB Short Circuit to GND ISC VCC = 15V - 40 60 - 40 60 mA Output Current ISOURCE VI(+) = 1V, VI(-) = 0V VCC =15V, VO(P) = 2V 20 40 - 20 40 - mA ISINK VI(+) = 0V, VI(-) = 1V VCC = 15V, VO(P) = 2V 10 20 - 10 13 - mA VI(+) = 0V, VI(-) = 1V VCC = 15V, VO(P) = 200mV 12 50 - - - - μA Differential Input Voltage VI(DIFF) - - - VCC - - VCC V

Page 8

LM324/LM324A, LM2902/LM2902A 6 Electrical Characteristics (Continued) (VCC = 5.0V, VEE = GND, unless otherwise specified) The following specification apply over the range of 0°C ≤ TA ≤ +70°C for the LM324A ; and the -40°C ≤ TA ≤ +85°C for the LM2902A Note: 1. VCC=30V for LM324A ; VCC=26V for LM2902A. 2. These parameters, although guaranteed, are not 100% tested in production. Parameter Symbol Conditions LM324A LM2902A Unit Min. Typ. Max. Min. Typ. Max. Input Offset Voltage VIO VCM = 0V to VCC -1.5V VO(P) = 1.4V, RS = 0Ω (Note1) - - 5.0 - - 6.0 mV Input Offset Voltage Drift ΔVIO/ΔT RS = 0Ω (Note2) - 7.0 30 - 7.0 - μV/°C Input Offset Current IIO VCM = 0V - - 75 - - 200 nA Input Offset Current Drift ΔIIO/ΔT RS = 0Ω (Note2) - 10 300 - 10 - pA/°C Input Bias Current IBIAS - - 40 200 - - 500 nA Input Common-Mode Voltage Range VI(R) Note1 0 - VCC -2.0 0 - VCC -2.0 V Large Signal Voltage Gain GV VCC = 15V, RL= 2.0kΩ 15 - - 15 - - V/mV Output Voltage Swing VO(H) Note1 RL = 2kΩ 26 - - 22 - - V RL = 10kΩ 27 28 - 23 24 - V VO(L) VCC = 5V, RL= 10kΩ - 5 20 - 5 100 mV Output Current ISOURCE VI(+) = 1V, VI(-) = 0V VCC = 15V, VO(P) = 2V 10 20 - 10 20 - mA ISINK VI(+) = 0V, VI(-) = 1V VCC = 15V, VO(P) = 2V 5 8 - 5 8 - mA Differential Input Voltage VI(DIFF) - - - VCC - - VCC V

Page 9

LM324/LM324A, LM2902/LM2902A 7 Typical Performance Characteristics Figure 1. Input Voltage Range vs Supply Voltage Figure 2. Input Current vs Temperature Figure 3. Supply Current vs Supply Voltage Figure 4. Voltage Gain vs Supply Voltage Figure 5. Open Loop Frequency Response Figure 6. Common mode Rejection Ratio Supply Voltage(v) Temperature Tj ( °C) Supply Voltage (V) Supply Voltage (V) Frequency (Hz) Frequency (Hz)

Page 10

LM324/LM324A, LM2902/LM2902A 8 Typical Performance Characteristics (Continued) Figure 7. Voltage Follower Pulse Response Figure 8. Voltage Follower Pulse Response (Small Signal) Figure 9. Large Signal Frequency Response Figure 10. Output Characteristics vs Current Sourcing Figure 11. Output Characteristics vs Current Sinking Figure 12. Current Limiting vs Temperature