Contact Us +86-755-83210559 ext. 811




For Reference Only

Part Number LQW18AN3N6D00D
Manufacturer Murata
Description FIXED IND 3.6NH 850MA 59 MOHM
Datasheet LQW18AN3N6D00D Datasheet
Package 0603 (1608 Metric)
In Stock 8,010 piece(s)
Unit Price $ 0.0540 *
Lead Time Can Ship Immediately
Estimated Delivery Time Aug 14 - Aug 19 (Choose Expedited Shipping)
Request for Quotation

Part Number # LQW18AN3N6D00D (Fixed Inductors) is manufactured by Murata and distributed by Heisener. Being one of the leading electronics distributors, we carry many kinds of electronic components from some of the world’s top class manufacturers. Their quality is guaranteed by its stringent quality control to meet all required standards.

For LQW18AN3N6D00D specifications/configurations, quotation, lead time, payment terms of further enquiries please have no hesitation to contact us. To process your RFQ, please add LQW18AN3N6D00D with quantity into BOM. does NOT require any registration to request a quote of LQW18AN3N6D00D.

LQW18AN3N6D00D Specifications

CategoryInductors, Coils, Chokes - Fixed Inductors
Datasheet LQW18AN3N6D00DDatasheet
Package0603 (1608 Metric)
Material - CoreNon-Magnetic
Current Rating850mA
Current - Saturation-
DC Resistance (DCR)59 mOhm Max
Q @ Freq25 @ 250MHz
Frequency - Self Resonant6GHz
Operating Temperature-55°C ~ 125°C
Frequency - Test100MHz
Mounting TypeSurface Mount
Package / Case0603 (1608 Metric)
Supplier Device Package0603 (1608 Metric)
Size / Dimension0.063" L x 0.031" W (1.60mm x 0.80mm)
Height - Seated (Max)0.039" (1.00mm)

LQW18AN3N6D00D Datasheet

Page 1

Page 2

SpecNo.JELF243A-0024Y-01 P.1/11 MURATA MFG.CO., LTD Reference Only CHIP COIL (CHIP INDUCTORS) LQW18AN□□□□00D REFERENCE SPECIFICATION 1.Scope This reference specification applies to LQW18AN_00 series, Chip coil (Chip Inductors). 2.Part Numbering (ex) LQ W 18 A N 2N2 D 0 0 D Product ID Structure Dimension Applications Category Inductance Tolerance Features Electrode Packaging (L×W) and D:Taping Characteristics *B:Bulk *Bulk packing also available. (A product is put in the plastic bag under the taping conditions.) 3.Rating ・Operating Temperature Range. –55°C to +125°C ・Storage Temperature Range. –55°C to +125°C Customer Part Number MURATA Part Number Inductance Q (min.) DC Resistance (Ω max.) Self Resonant Frequency (MHz min.) Rated Current (mA) (nH) Tolerance LQW18AN2N2D00D 2.2 D:±0.5nH 16 0.042 6000 700 LQW18AN3N6C00D 3.6 C:±0.2nH D:±0.5nH 25 0.059 850 LQW18AN3N6D00D LQW18AN3N9C00D 3.9 35 LQW18AN3N9D00D LQW18AN4N3C00D 4.3 LQW18AN4N3D00D LQW18AN4N7D00D 4.7 D:±0.5nH LQW18AN5N6C00D 5.6 C:±0.2nH D:±0.5nH 0.082 750 LQW18AN5N6D00D LQW18AN6N2C00D 6.2 LQW18AN6N2D00D LQW18AN6N8C00D 6.8 LQW18AN6N8D00D LQW18AN7N5C00D 7.5 LQW18AN7N5D00D LQW18AN8N2C00D 8.2 0.11 650 LQW18AN8N2D00D LQW18AN8N7C00D 8.7 LQW18AN8N7D00D LQW18AN9N1C00D 9.1 LQW18AN9N1D00D LQW18AN9N5D00D 9.5 D:±0.5nH LQW18AN10NG00D 10 G:±2% J:±5% LQW18AN10NJ00D LQW18AN11NG00D 11 LQW18AN11NJ00D LQW18AN12NG00D 12 0.13 600 LQW18AN12NJ00D LQW18AN13NG00D 13 LQW18AN13NJ00D LQW18AN15NG00D 15 40 LQW18AN15NJ00D LQW18AN16NG00D 16 0.16 5500 550 LQW18AN16NJ00D LQW18AN18NG00D 18 LQW18AN18NJ00D LQW18AN20NG00D 20 4900 LQW18AN20NJ00D LQW18AN22NG00D 22 0.17 4600 500 LQW18AN22NJ00D

Page 3

SpecNo.JELF243A-0024Y-01 P.2/11 MURATA MFG.CO., LTD Reference Only Customer Part Number MURATA Part Number Inductance Q (min.) DC Resistance (Ω max.) Self Resonant Frequency (MHz min.) Rated Current (mA) (nH) Tolerance LQW18AN24NG00D 24 G:±2% J:±5% 40 0.21 3800 500 LQW18AN24NJ00D LQW18AN27NG00D 27 3700 440 LQW18AN27NJ00D LQW18AN30NG00D 30 0.23 3300 420 LQW18AN30NJ00D LQW18AN33NG00D 33 3200 LQW18AN33NJ00D LQW18AN36NG00D 36 0.26 2900 400 LQW18AN36NJ00D LQW18AN39NG00D 39 2800 LQW18AN39NJ00D LQW18AN43NG00D 43 0.29 2700 380 LQW18AN43NJ00D LQW18AN47NG00D 47 38 2600 LQW18AN47NJ00D LQW18AN51NG00D 51 0.33 2500 370 LQW18AN51NJ00D LQW18AN56NG00D 56 0.35 2400 360 LQW18AN56NJ00D LQW18AN62NG00D 62 0.51 2300 280 LQW18AN62NJ00D LQW18AN68NG00D 68 0.38 2200 340 LQW18AN68NJ00D LQW18AN72NG00D 72 34 0.56 2100 270 LQW18AN72NJ00D LQW18AN75NG00D 75 2050 LQW18AN75NJ00D LQW18AN82NG00D 82 0.60 2000 250 LQW18AN82NJ00D LQW18AN91NG00D 91 0.64 1900 230 LQW18AN91NJ00D LQW18ANR10G00D 100 0.68 1800 220 LQW18ANR10J00D LQW18ANR11G00D 110 32 1.2 1700 200 LQW18ANR11J00D LQW18ANR12G00D 120 1.3 1600 180 LQW18ANR12J00D LQW18ANR13G00D 130 1.4 1450 170 LQW18ANR13J00D LQW18ANR15G00D 150 1.5 1400 160 LQW18ANR15J00D LQW18ANR16G00D 160 2.1 1350 150 LQW18ANR16J00D LQW18ANR18G00D 180 25 2.2 1300 140 LQW18ANR18J00D LQW18ANR20G00D 200 2.4 1250 120 LQW18ANR20J00D LQW18ANR22G00D 220 2.5 1200 LQW18ANR22J00D LQW18ANR27G00D 270 30 3.4 960 110 LQW18ANR27J00D LQW18ANR33G00D 330 5.5 800 85 LQW18ANR33J00D LQW18ANR39G00D 390 6.2 80 LQW18ANR39J00D LQW18ANR47G00D 470 7.0 700 75 LQW18ANR47J00D

Page 4

SpecNo.JELF243A-0024Y-01 P.3/11 MURATA MFG.CO., LTD Reference Only 4. Testing Conditions 《Unless otherwise specified》 《In case of doubt》 Temperature : Ordinary Temperature / 15°C to 35°C Temperature : 20°C±2°C Humidity : Ordinary Humidity / 25%(RH) to 85%(RH) Humidity : 60%(RH) to 70%(RH) Atmospheric Pressure : 86kPa to 106 kPa 5. Appearance and Dimensions ■Unit Mass (Typical value) 0.003g (in mm) 6.Electrical Performance No. Item Specification Test Method 6.1 Inductance Inductance shall meet item 3. Measuring Equipment: KEYSIGHT E4991A or equivalent Measuring Frequency: 100MHz 250MHz/ 2.2nH~39nH 200MHz/ 43nH~68nH 150MHz/ 72nH~160nH 100MHz/ 180nH~470nH Measuring Condition: Test signal level / about 0dBm Electrode spaces / 1.0mm Electrical length / 0.94cm Measuring Fixture: KEYSIGHT 16193A Position coil under test as shown in below and contact coil with each terminal by adding weight. Measuring Method:See the endnote. 6.2 Q Q shall meet item 3. 6.3 DC Resistance DC Resistance shall meet item 3. Measuring Equipment:Digital multi meter 6.4 Self Resonant Frequency(S.R.F) S.R.F shall meet item 3. Measuring Equipment: KEYSIGHT N5230A or equivalent 6.5 Rated Current Self temperature rise shall be limited to 20°C max. Inductance Change: within ±10% The rated current is applied. 1.6±0.2 0.3±0.1 0. 8± 0. 2 0. 4 m ax . 0. 2± 0. 1 0.3±0.1 0. 8± 0. 15 0. 8± 0. 2 6.97mm 1mm

Page 5

SpecNo.JELF243A-0024Y-01 P.4/11 MURATA MFG.CO., LTD Reference Only 7.Mechanical Performance No. Item Specification Test Method 7.1 Shear Test Chip coil shall not be damaged after tested as test method. Substrate:Glass-epoxy substrate (in mm) Applied Direction: Force:5N Hold Duration:5s±1s 7.2 Bending Test Substrate:Glass-epoxy substrate (100mm×40mm×1.6mm) Speed of Applying Force:1mm / s Deflection:2mm Hold Duration:30s (in mm) 7.3 Vibration Chip coil shall not be damaged after tested as test method. Oscillation Frequency: 10Hz~55Hz~10Hz for 1 min Total Amplitude:1.5mm Testing Time: A period of 2 hours in each of 3 mutually perpendicular directions. 7.4 Solderability The wetting area of the electrode shall be at least 90% covered with new solder coating. Flux:Ethanol solution of rosin,25(wt)% Includes activator equivalent to 0.06(wt)% chlorine.(immersed for 5s to 10s) Solder:Sn-3.0Ag-0.5Cu Pre-Heating:150°C±10°C / 60s to 90s Solder Temperature:240°C±5°C Immersion Time:3s±1s 7.5 Resistance to Soldering Heat Appearance:No damage Inductance Change: within ±5% Flux:Ethanol solution of rosin,25(wt)% Includes activator equivalent to 0.06(wt)% Chlorine.(immersed for 5s to 10s) Solder:Sn-3.0Ag-0.5Cu Pre-Heating:150°C±10°C / 60s to 90s Solder Temperature:270°C±5°C Immersion Time:10s±1s Then measured after exposure in the room condition for 24h±2h. Substrate F Chip Coil 45 R340 F Deflection 45 Product Pressure jig 2.2 0.7 0.7 Chip Coil Pattern Solder resist Substrate

Page 6

SpecNo.JELF243A-0024Y-01 P.5/11 MURATA MFG.CO., LTD Reference Only 8.Environmental Performance It shall be soldered on the substrate. No. Item Specification Test Method 8.1 Heat Resistance Appearance:No damage Inductance Change: within ±5% Q Change: within ±20% Temperature:125°C±2°C Time:1000h (+48h,0h) Then measured after exposure in the room condition for 24h±2h. 8.2 Cold Resistance Appearance:No damage Inductance Change: within ±5% Q Change: within ±20% Temperature:-55°C±2°C Time:1000h (+48h,-0h) Then measured after exposure in the room condition for 24h±2h. 8.3 Humidity Temperature:40°C±2°C Humidity:90%(RH) to 95%(RH) Time:1000h (+48h,-0h) Then measured after exposure in the room condition for 24h±2h. 8.4 Temperature Cycle 1 cycle: 1 step:-55°C±2°C / 30min±3 min 2 step:Ordinary temp. / 10min to 15 min 3 step:+125°C±2°C / 30min±3 min 4 step:Ordinary temp. / 10min to15 min Total of 10 cycles Then measured after exposure in the room condition for 24h±2h. 9.Specification of Packaging 9.1 Appearance and Dimensions of paper tape (8mm-wide) (in mm) 9.2 Specification of Taping (1) Packing quantity (standard quantity) 4,000 pcs. / reel (2) Packing Method Products shall be packed in the cavity of the base tape and sealed by top tape and bottom tape. (3) Sprocket hole The sprocket holes are to the right as the tape is pulled toward the user. (4) Spliced point Base tape and Top tape has no spliced point. (5) Missing components number Missing components number within 0.1 % of the number per reel or 1 pc., whichever is greater, and are not continuous. The Specified quantity per reel is kept. 9.3 Pull Strength Top tape 5N min. Bottom tape 4.0±0.1 φ 1.5± 2.0±0.05 4.0±0.1 Direction of feed 1.1 max. 1.0±0.05 1 .8 ± 0 .0 5 8 .0 ± 0 .2 3 .5 ± 0 .0 5 1.75±0.10.10

Page 7

SpecNo.JELF243A-0024Y-01 P.6/11 MURATA MFG.CO., LTD Reference Only 9.4 Peeling off force of cover tape Speed of Peeling off 300mm/min Peeling off force 0.1N to 0.6N (minimum value is typical) 9.5 Dimensions of Leader-tape,Trailer and Reel There shall be leader-tape ( top tape and empty tape) and trailer-tape (empty tape) as follows. (in mm) 9.6 Marking for reel Customer part number, MURATA part number, Inspection number(∗1) ,RoHS Marking (∗2), Quantity etc ・・・ ∗1) □□ OOOO ××× (1) (2) (3) (1) Factory code (2) Date First digit: Year / Last digit of year Second digit: Month / Jan. to Sep. → 1 to 9, Oct. to Dec. → O, N, D Third, Fourth digit : Day (3) Serial No. ∗2) ROHS – Y (△) (1) (2) (1) RoHS regulation conformity parts. (2) MURATA classification number 9.7 Marking for Outside package (corrugated paper box) Customer name, Purchasing order number, Customer part number, MURATA part number, RoHS Marking (∗2) ,Quantity, etc ・・・ 9.8. Specification of Outer Case Outer Case Dimensions (mm) Standard Reel Quantity in Outer Case (Reel) W D H 186 186 93 5 ∗ Above Outer Case size is typical. It depends on a quantity of an order. 10. ! Caution Limitation of Applications Please contact us before using our products for the applications listed below which require especially high reliability for the prevention of defects which might directly cause damage to the third party's life, body or property. (1) Aircraft equipment (6) Transportation equipment (vehicles, trains, ships, etc.) (2) Aerospace equipment (7) Traffic signal equipment (3) Undersea equipment (8) Disaster prevention / crime prevention equipment (4) Power plant control equipment (9) Data-processing equipment (5) Medical equipment (10) Applications of similar complexity and /or reliability requirements to the applications listed in the above F165 to 180 degree Top tape Bottom tape Base tape Empty tape 190 min. Leader Trailer 2.0±0.5 φ13.0±0.2 φ21.0±0.8 φ180 φ60 9.0 13.0±1.4 +1 -0 +0 -3 Direction of feed 210 min. 160 min. Top tape +1 -0 Label W D Label H

Page 8

SpecNo.JELF243A-0024Y-01 P.7/11 MURATA MFG.CO., LTD Reference Only 11. Notice Products can only be soldered with reflow. This product is designed for solder mounting. Please consult us in advance for applying other mounting method such as conductive adhesive. 11.1 Land pattern designing Recommended land patterns for reflow soldering are as follows: These have been designed for Electric characteristics and solderability. Please follow the recommended patterns. Otherwise, their performance which includes electrical performance or solderability may be affected, or result to "position shift" in soldering process. (in mm) 11.2 Flux, Solder ・Use rosin-based flux. Includes middle activator equivalent to 0.06(wt)% to 0.1(wt)% Chlorine. Don’t use highly acidic flux with halide content exceeding 0.2(wt)% (chlorine conversion value). Don’t use water-soluble flux. ・Use Sn-3.0Ag-0.5Cu solder. ・Standard thickness of solder paste : 100μm to 150μm. 11.3 Reflow soldering conditions ・Pre-heating should be in such a way that the temperature difference between solder and product surface is limited to 150°C max. Cooling into solvent after soldering also should be in such a way that the temperature difference is limited to 100°C max. Insufficient pre-heating may cause cracks on the product, resulting in the deterioration of products quality. ・Standard soldering profile and the limit soldering profile is as follows. The excessive limit soldering conditions may cause leaching of the electrode and / or resulting in the deterioration of product quality. ・Reflow soldering profile Standard Profile Limit Profile Pre-heating 150°C~180°C 、90s±30s Heating above 220°C、30s~60s above 230°C、60s max. Peak temperature 245°C±3°C 260°C,10s Cycle of reflow 2 times 2 times A 0.6 to 0.8 B 1.9 to 2.0 C 0.7 to 1.0 Limit Profile Standard Profile 90s±30s 230℃ 260℃ 245℃±3℃ 220℃ 30s~60s 60s max. 180 150 Temp. (s) (℃) Time. a b c Chip Coil Solder resist Land

Page 9

SpecNo.JELF243A-0024Y-01 P.8/11 MURATA MFG.CO., LTD Reference Only 11.4 Reworking with soldering iron The following conditions must be strictly followed when using a soldering iron. Pre-heating 150°C,1 min Tip temperature 350°C max. Soldering iron output 80W max. Tip diameter φ3mm max. Soldering time 3(+1,-0)s Time 2 times Note :Do not directly touch the products with the tip of the soldering iron in order to prevent the crack on the products due to the thermal shock. 11.5 Solder Volume ・Solder shall be used not to be exceeded the upper limits as shown below. ・Accordingly increasing the solder volume, the mechanical stress to Chip is also increased. Exceeding solder volume may cause the failure of mechanical or electrical performance. 1/3T≦t≦T T:thickness of product 11.6 Product’s location The following shall be considered when designing and laying out P.C.B.'s. (1) P.C.B. shall be designed so that products are not subject to the mechanical stress due to warping the board. [Products direction] Products shall be located in the sideways direction (Length:a<b) to the mechanical stress. (2) Components location on P.C.B. separation. It is effective to implement the following measures, to reduce stress in separating the board. It is best to implement all of the following three measures; however, implement as many measures as possible to reduce stress. Contents of Measures Stress Level (1) Turn the mounting direction of the component parallel to the board separation surface. A > D *1 (2) Add slits in the board separation part. A > B (3) Keep the mounting position of the component away from the board separation surface. A > C *1 A > D is valid when stress is added vertically to the perforation as with Hand Separation. If a Cutting Disc is used, stress will be diagonal to the PCB, therefore A > D is invalid. 〈Poor example〉 〈Good example〉 b a T Upper Limit Recommendable(t) Seam Slit A D B C b a Length:a< b

Page 10

SpecNo.JELF243A-0024Y-01 P.9/11 MURATA MFG.CO., LTD Reference Only (3) Mounting Components Near Screw Holes When a component is mounted near a screw hole, it may be affected by the board deflection that occurs during the tightening of the screw. Mount the component in a position as far away from the screw holes as possible. 11.7 Cleaning Conditions Products shall be cleaned on the following conditions. (1) Cleaning temperature shall be limited to 60°C max.(40°C max for IPA) (2) Ultrasonic cleaning shall comply with the following conditions with avoiding the resonance phenomenon at the mounted products and P.C.B. Power : 20 W / l max. Frequency : 28kHz to 40kHz Time : 5 min max. (3) Cleaner 1. Alcohol type cleaner Isopropyl alcohol (IPA) 2. Aqueous agent PINE ALPHA ST-100S (4) There shall be no residual flux and residual cleaner after cleaning. In the case of using aqueous agent, products shall be dried completely after rinse with de-ionized water in order to remove the cleaner. (5) Other cleaning Please contact us. 11.8 Resin coating The inductance value may change due to high cure-stress of resin to be used for coating/molding products. An open circuit issue may occur by mechanical stress caused by the resin, amount/cured shape of resin, or operating condition etc. Some resin contains some impurities or chloride possible to generate chlorine by hydrolysis under some operating condition may cause corrosion of wire of coil, leading to open circuit. So, please pay your careful attention in when you select resin in case of coating/molding the products with the resin. Prior to use the coating resin, please make sure no reliability issue is observed by evaluating products mounted on your board. 11.9 Caution for use ・Sharp material such as a pair of tweezers or other material such as bristles of cleaning brush , shall not be touched to the winding portion to prevent the breaking of wire. ・Mechanical shock should not be applied to the products mounted on the board to prevent the breaking of the core. 11.10 Notice of product handling at mounting In some mounting machines,when picking up components support pin pushes up the components from the bottom of base tape. In this case, please remove the support pin. The support pin may damage the components and break wire. In rare case ,the laser recognition can not recognize this component. Please contact us when you use laser recognition. (There is no problem with the permeation and reflection type.) 11.11 Handling of a substrate After mounting products on a substrate, do not apply any stress to the product caused by bending or twisting to the substrate when cropping the substrate, inserting and removing a connector from the substrate or tightening screw to the substrate. Excessive mechanical stress may cause cracking in the product. Bending Twisting

LQW18AN3N6D00D Reviews

Average User Rating
5 / 5 (75)
★ ★ ★ ★ ★
5 ★
4 ★
3 ★
2 ★
1 ★

Write a Review

Not Rated
Thanks for Your Review!


August 4, 2020

I always enjoy shopping with Heisener, never makes a mistake, most reliable, and no long waiting for deliveries.


July 29, 2020

Fast delivery well packed and as described.


July 29, 2020

Perfect! Nice components, professional service!


July 24, 2020

All items individually packed in anti static bags and properly labeled.


July 18, 2020

Not messy and easy to handle. I've used these professionally and for my self, and they never failed me.


July 18, 2020

The order has arrived ahead of time, we appreciate it very much!! Thanks


July 5, 2020

Works just like the original one and even has the correct connectors installed.


June 29, 2020

Heisener has a fantastic Web site shopping system! Best purchasing interface of the bundle.


June 25, 2020

This was a perfect replacement for the original mode. 5 minutes and it was up and running like new.

Ash***** De

June 22, 2020

Excellent sales and service. Thank you. Buy with confidence.

LQW18AN3N6D00D Guarantees

Service Guarantee

Service Guarantees

We guarantee 100% customer satisfaction.

Our experienced sales team and tech support team back our services to satisfy all our customers.

Quality Guarantee

Quality Guarantees

We provide 90 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.

LQW18AN3N6D00D Packaging

Verify Products
Customized Labels
Professional Packaging

LQW18AN3N6D00D Related Products

SIT1602BI-13-33S-24.576000D SIT1602BI-13-33S-24.576000D SiTIME, -40 TO 85C, 2520, 50PPM, 3.3V, 2, -, LQW18 View
F339X141033MF02W0 F339X141033MF02W0 Vishay BC Components, CAP FILM 0.1UF 20% 800VDC RADIAL, Radial, LQW18 View
VJ1812A180JNHAJ VJ1812A180JNHAJ Vishay Vitramon, CAP CER 18PF 3KV C0G/NP0 1812, 1812 (4532 Metric), LQW18 View
0805J2500180GFT 0805J2500180GFT Knowles Syfer, CAP CER 18PF 250V C0G/NP0 0805, 0805 (2012 Metric), LQW18 View
VJ0603D1R2DLAAJ VJ0603D1R2DLAAJ Vishay Vitramon, CAP CER 1.2PF 50V C0G/NP0 0603, 0603 (1608 Metric), LQW18 View
MLP371M350EB0A MLP371M350EB0A Cornell Dubilier Electronics (CDE), CAP ALUM 370UF 20% 350V FLATPACK, FlatPack, Tabbed, LQW18 View
MAP4KE250CAE3 MAP4KE250CAE3 Microsemi Corporation, TVS DIODE 214VWM 344VC DO41, DO-204AL, DO-41, Axial, LQW18 View
Y0789643R000T9L Y0789643R000T9L Vishay Foil Resistors (Division of Vishay Precision Group), RES 643 OHM 0.3W 0.01% RADIAL, Radial, LQW18 View
RC1210FR-0730K1L RC1210FR-0730K1L Yageo, RES SMD 30.1K OHM 1% 1/2W 1210, 1210 (3225 Metric), LQW18 View
D38999/26ZB99JC D38999/26ZB99JC Amphenol Aerospace Operations, CONN PLUG FMALE 7POS GOLD CRIMP, -, LQW18 View
EMC40DRYN-S13 EMC40DRYN-S13 Sullins Connector Solutions, CONN EDGE DUAL FMALE 80POS 0.100, -, LQW18 View
VI-J61-IZ-F2 VI-J61-IZ-F2 Vicor Corporation, CONVERTER MOD DC/DC 12V 25W, Half Brick, LQW18 View
Payment Methods
Delivery Services

Quick Inquiry


Certified Quality

Heisener's commitment to quality has shaped our processes for sourcing, testing, shipping, and every step in between. This foundation underlies each component we sell.

ISO9001:2015, ICAS, IAF, UKAS

View the Certificates

Do you have any question about LQW18AN3N6D00D?

+86-755-83210559 ext. 811 heisener007 2354944915 Send Message

LQW18AN3N6D00D Tags

  • LQW18AN3N6D00D
  • LQW18AN3N6D00D PDF
  • LQW18AN3N6D00D datasheet
  • LQW18AN3N6D00D specification
  • LQW18AN3N6D00D image
  • Murata
  • Murata LQW18AN3N6D00D
  • buy LQW18AN3N6D00D
  • LQW18AN3N6D00D price
  • LQW18AN3N6D00D distributor
  • LQW18AN3N6D00D supplier
  • LQW18AN3N6D00D wholesales

LQW18AN3N6D00D is Available in