Contact Us
SalesDept@heisener.com 0755-83210559 ext. 805

MAX4381EUB+T

hotMAX4381EUB+T

MAX4381EUB+T

For Reference Only

Part Number MAX4381EUB+T
Manufacturer Maxim Integrated
Description IC OPAMP VFB 210MHZ RRO 10UMAX
Datasheet MAX4381EUB+T Datasheet
Package 10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
In Stock 1,231 piece(s)
Unit Price $ 1.6157 *
Lead Time Can Ship Immediately
Estimated Delivery Time Sep 27 - Oct 2 (Choose Expedited Shipping)
Request for Quotation

Part Number # MAX4381EUB+T (Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps) is manufactured by Maxim Integrated and distributed by Heisener. Being one of the leading electronics distributors, we carry many kinds of electronic components from some of the world’s top class manufacturers. Their quality is guaranteed by its stringent quality control to meet all required standards.

For MAX4381EUB+T specifications/configurations, quotation, lead time, payment terms of further enquiries please have no hesitation to contact us. To process your RFQ, please add MAX4381EUB+T with quantity into BOM. Heisener.com does NOT require any registration to request a quote of MAX4381EUB+T.

MAX4381EUB+T Specifications

ManufacturerMaxim Integrated
CategoryIntegrated Circuits (ICs) - Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
Datasheet MAX4381EUB+TDatasheet
Package10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Series-
Amplifier TypeVoltage Feedback
Number of Circuits2
Output TypeRail-to-Rail
Slew Rate485 V/µs
Gain Bandwidth Product-
-3db Bandwidth210MHz
Current - Input Bias8.5µA
Voltage - Input Offset3mV
Current - Supply7.5mA
Current - Output / Channel75mA
Voltage - Supply, Single/Dual (±)4.5 V ~ 11 V, ��2.25 V ~ 5.5 V
Operating Temperature-40°C ~ 85°C
Mounting TypeSurface Mount
Package / Case10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Supplier Device Package10-uMAX

MAX4381EUB+T Datasheet

Page 1

Page 2

General Description The MAX4380–MAX4384 family of op amps are unity- gain-stable devices that combine high-speed perfor- mance, Rail-to-Rail® outputs, and high-impedance disable mode. These devices operate from a +4.5V to +11V single supply or from ±2.25V to ±5.5V dual sup- plies. The common-mode input voltage range extends beyond the negative power-supply rail (ground in sin- gle-supply applications). The MAX4380–MAX4384 require only 5.5mA of quies- cent supply current per op amp while achieving a 210MHz -3dB bandwidth, 55MHz 0.1dB gain flatness and a 485V/µs slew rate. These devices are an excel- lent solution in low-power/low-voltage systems that require wide bandwidth, such as video, communica- tions, and instrumentation. The MAX4380 single with disable is available in an ultra- small 6-pin SC70 package. Applications Set-Top Boxes Surveillance Video Systems Battery-Powered Instruments Analog-to-Digital Converter Interface CCD Imaging Systems Video Routing and Switching Systems Digital Cameras Video-on-Demand Video Line Driver Features  Low Cost and High Speed: 210MHz -3dB Bandwidth 55MHz 0.1dB Gain Flatness 485V/µs Slew Rate  Disable Mode Places Outputs in High-Impedance State  Single +4.5V to +11V Operation  Rail-to-Rail Outputs  Input Common-Mode Range Extends Beyond VEE  Low Differential Gain/Phase: 0.02%/0.08°  Low Distortion at 5MHz -65dBc SFDR -63dB Total Harmonic Distortion  Ultra-Small 6-Pin SC70, 6-Pin SOT23, 10-Pin µMAX, 14-Pin TSSOP, and 20-Pin TSSOP Packages M A X 4 3 8 0 – M A X 4 3 8 4 Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable 500Ω 500Ω 75Ω 75Ω IN OUT VIDEO LINE DRIVER Zo = 75Ω DISABLE MAX4380 Typical Operating Circuit 19-2012; Rev 2; 4/03 Ordering Information ________________________________________________________________ Maxim Integrated Products 1 VEE IN-IN+ 1 6 VCC 5 DISABLE OUT MAX4380 SC70-6/SOT23-6 TOP VIEW 2 3 4 Pin Configurations Pin Configurations continued at end of data sheet. PART TEMP RANGE PIN- PACKAGE TOP MARK MAX4380EXT-T -40°C to +85°C 6 SC70-6 AAV MAX4380EUT-T -40°C to +85°C 6 SOT23-6 — MAX4381EUB -40°C to +85°C 10 µMAX — MAX4382EUD -40°C to +85°C 14 TSSOP — MAX4382ESD -40°C to +85°C 14 SO — MAX4382EEE -40°C to +85°C 16 QSOP — MAX4383EUD -40°C to +85°C 14 TSSOP — MAX4383ESD -40°C to +85°C 14 SO — MAX4383ESE -40°C to +85°C 16 SO — MAX4383EEE -40°C to +85°C 16 QSOP — MAX4384EUP -40°C to +85°C 20 TSSOP — For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.

Page 3

M A X 4 3 8 0 – M A X 4 3 8 4 Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable 2 _______________________________________________________________________________________ ABSOLUTE MAXIMUM RATINGS Supply Voltage (VCC to VEE)................................................+12V IN_-, IN_+, OUT_, DISABLE_ ...........(VEE - 0.3V) to (VCC + 0.3V) Output Short-Circuit to VCC or VEE...........................................1s Continuous Power Dissipation (TA = +70°C) 6-Pin SC70 (derate 3.1mW/°C above +70°C) .............245mW 6-Pin SOT23 (derate 7.1mW/°C above +70°C) ...........571mW 10-Pin µMAX (derate 5.6mW/°C above +70°C) ..........444mW 14-Pin TSSOP (derate 9.1mW/°C above +70°C).........727mW 14-Pin SO (derate 8.3mW/°C above +70°C) ...............667mW 16-Pin QSOP (derate 8.3mW/°C above +70°C) ..........667mW 16-Pin Narrow SO (derate 8.7mW/°C above +70°C) ..696mW 20-Pin TSSOP (derate 10.9mW/°C above +70°C).......879mW Operating Temperature Range. ..........................-40°C to +85°C Junction Temperature ......................................................+150°C Storage Temperature Range .............................-65°C to +150°C Lead Temperature (soldering, 10s) .................................+300°C Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or at any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS–Single Supply (VCC = +5V, VEE = 0, VCM = VCC/2, VOUT = VCC/2, RL = ∞ to VCC/2, DISABLE_ = VCC (MAX4380/MAX4381/MAX4382/MAX4384), TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Input Common-Mode Voltage Range VCM Guaranteed by CMRR VEE - 0.2 VCC - 2.25 V TA = +25°C 0.2 12 Input Offset Voltage VOS TA = -40°C to +85°C 20 mV Input Offset Voltage Matching MAX4381–MAX4384 1 mV Input Offset Voltage Tempco TCVOS 8 µV/°C Input Bias Current IB 6.5 20 µA Input Offset Current IOS 0.5 7 µA Differential mode (-1V ≤ VIN ≤ +1V) 70 kΩ Input Resistance RIN Common mode (-0.2V ≤ VCM ≤ +2.75V) 3 MΩ Common-Mode Rejection Ratio CMRR VEE - 0.2V ≤ VCM ≤ VCC - 2.25V 70 95 dB 0.25V ≤ VOUT ≤ 4.75V, RL = 2kΩ 50 61 0.8V ≤ VOUT ≤ 4.5V, RL = 150Ω 48 63Open-Loop Gain AVOL 1V ≤ VOUT ≤ 4V, RL = 50Ω 58 dB VCC - VOH 0.05 0.2 RL = 2kΩ VOL - VEE 0.05 0.15 VCC - VOH 0.3 0.5 RL = 150Ω VOL - VEE 0.25 0.8 VCC - VOH 0.5 0.8 RL = 75Ω VOL - VEE 0.5 1.75 VCC - VOH 1 1.7 Output Voltage Swing VOUT RL = 75Ω to ground VOL - VEE 0.025 0.125 V Sinking from RL = 75Ω to VCC 40 55 Output Current IOUT Sourcing into RL = 75Ω to VEE 25 50 mA Output Short-Circuit Current ISC Sinking or sourcing ±100 mA Open-Loop Output Resistance ROUT 8 Ω Power-Supply Rejection Ratio PSRR VS = +4.5V to +5.5V 50 62 dB

Page 4

M A X 4 3 8 0 – M A X 4 3 8 4 Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable _______________________________________________________________________________________ 3 DC ELECTRICAL CHARACTERISTICS–Single Supply (VCC = +5V, VEE = 0, VCM = VCC/2, VOUT = VCC/2, RL = ∞ to VCC/2, DISABLE_ = VCC (MAX4380/MAX4381/MAX4382/MAX4384), TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Operating Supply Voltage Range VS Guaranteed by PSRR (Note 2) 4.5 11 V Disabled Output Resistance ROUT(OFF) DISABLE_ = 0, 0 ≤ VOUT ≤ 5V 27 35 kΩ DISABLE_ Logic-Low Threshold VIL V C C - 3 V DISABLE_ Logic-High Threshold VIH VCC - 1.25 V DISABLE_ Logic Input Low Current IIL DISABLE_ = 0 25 60 µA DISABLE_ Logic Input High Current IIH DISABLE_ = VCC 10 40 µA DISABLE_ = VCC 5.5 9Quiescent Supply Current (Per Amplifier) IS DISABLE_ = 0 0.45 0.6 mA DC ELECTRICAL CHARACTERISTICS–Dual Supply (VCC = +5V, VEE = -5V, VCM = 0, VOUT = 0, RL = ∞ to 0, DISABLE_ = VCC (MAX4380/MAX4381/MAX4382/MAX4384), TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Input Common-Mode Voltage Range VCM Guaranteed by CMRR VEE V C C - 2.25 V TA = +25°C 3 16 Input Offset Voltage VOS TA = TMIN to TMAX 24 mV Input Offset Voltage Matching MAX4381–MAX4384 1 mV Input Offset Voltage Tempco TCVOS 8 µV/°C Input Bias Current IB 8.5 25 µA Input Offset Current IOS 0.5 12 µA Differential mode (-1V ≤ VIN ≤ +1V) 70 kΩ Input Resistance RIN Common mode (-5V ≤ VCM ≤ 2.75V) 3 MΩ Common-Mode Rejection Ratio CMRR VEE ≤ VCM ≤ VCC - 2.25V 70 95 dB -4.5V ≤ VOUT ≤ +4.5V, RL = 2kΩ 50 62 -4.25V ≤ VOUT ≤ +4.25V, RL = 150Ω 48 65Open-Loop Gain AVOL -4V ≤ VOUT ≤ +4V, RL = 50Ω 60 dB VCC - VOH 0.175 0.375 RL = 2kΩ VOL - VEE 0.075 0.225 VCC - VOH 0.575 0.85 RL = 150Ω VOL - VEE 0.4 0.775 VCC - VOH 1.3 2.3 Output Voltage Swing VOUT RL = 75Ω VOL - VEE 1.3 2.45 V

Page 5

M A X 4 3 8 0 – M A X 4 3 8 4 Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable 4 _______________________________________________________________________________________ AC ELECTRICAL CHARACTERISTICS–Single Supply (VCC = +5V, VEE = 0, VCM = +1.5V, RL = 100Ω to VCC/2, DISABLE_ = VCC (MAX4380/MAX4381/MAX4382/MAX4384), VOUT = VCC/2, AVCL = +1V/V, TA = +25°C, unless otherwise noted.) DC ELECTRICAL CHARACTERISTICS–Dual Supply (continued) (VCC = +5V, VEE = -5V, VCM = 0, VOUT = 0, RL = ∞ to 0, DISABLE_ = VCC (MAX4380/MAX4381/MAX4382/MAX4384), TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25°C.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Sinking from RL = 75Ω to VCC 50 75 Output Current IOUT Sourcing into RL = 75Ω to VEE 50 75 mA Output Short-Circuit Current ISC Sinking or sourcing ±100 mA Open-Loop Output Resistance ROUT 8 Ω Power-Supply Rejection Ratio PSRR VS = ±4.5V to ±5.5V 48 62 dB Operating Supply Voltage Range VS Guaranteed by PSRR (Note 2) ±2.25 ±5.5 V Disabled Output Resistance ROUT(OFF) DISABLE_ = 0, -5V ≤ VOUT ≤ 5V 27 35 kΩ DISABLE_ Logic-Low Threshold VIL VCC - 3 V DISABLE_ Logic-High Threshold VIH VCC - 1.25 V DISABLE_ Logic Input Low Current IIL DISABLE_ = 0 25 µA DISABLE_ Logic Input High Current IIH DISABLE_ = VCC 10 µA DISABLE_ = VCC 7.5 10Quiescent Supply Current (Per Amplifier) IS DISABLE_ = 0 0.45 0.8 mA PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Small-Signal -3dB Bandwidth BWSS VOUT = 100mVp-p 210 MHz Large-Signal -3dB Bandwidth BWLS VOUT = 2Vp-p 175 MHz Small-Signal 0.1dB Gain Flatness BW0.1dBSS VOUT = 100mVp-p 55 MHz Large-Signal 0.1dB Gain Flatness BW0.1dBLS VOUT = 2Vp-p 40 MHz Slew Rate SR VOUT = 2V step 485 V/µs Settling Time to 0.1% tS VOUT = 2V step 16 ns Rise/Fall Time tR , tF VOUT = 100mVp-p 4 ns Spurious-Free Dynamic Range SFDR fC = 5MHz, VOUT = 2Vp-p -65 dBc 2nd harmonic -65 3rd harmonic -68Harmonic Distortion HD fC = 5MHz, VOUT = 2Vp-p Total harmonic -63 dBc Two-Tone, Third-Order Intermodulation Distortion IP3 f1 = 4.7MHz, f2 = 4.8MHz, VOUT = 1Vp-p -66 dBc

Page 6

M A X 4 3 8 0 – M A X 4 3 8 4 Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable _______________________________________________________________________________________ 5 AC ELECTRICAL CHARACTERISTICS–Single Supply (continued) (VCC = +5V, VEE = 0, VCM = +1.5V, RL = 100Ω to VCC/2, DISABLE_ = VCC (MAX4380/MAX4381/MAX4382/MAX4384), VOUT = VCC/2, AVCL = +1V/V, TA = +25°C, unless otherwise noted.) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Channel-to-Channel Isolation CHISO Specified at DC -102 dB Input 1dB Compression Point fC = 10MHz, AVCL = +2V/V 14 dBm Differential Phase Error DP NTSC, RL = 150Ω 0.08 degrees Differential Gain Error DG NTSC, RL = 150Ω 0.02 % Input Noise-Voltage Density en f = 10kHz 10 nV/√Hz Input Noise-Current Density In f = 10kHz 2 pA/√Hz Input Capacitance CIN 1 pF Output Impedance ZOUT f = 10MHz 1.5 Ω Enable Time tON VIN = 1V (MAX4380/MAX4381/ MAX4382/MAX4384) 100 ns Disable Time tOFF VIN = 1V (MAX4380/MAX4381/ MAX4382/MAX4384) 1 µs Note 1: All devices are 100% production tested at TA = +25°C. Specifications over temperature limits are guaranteed by design. Note 2: PSRR for single +5V supply tested with VEE = 0, VCC = +4.5V to +5.5V; PSRR for dual ±5V supply tested with VEE = -4.5V to -5.5V, VCC = +4.5V to +5.5V. 4 -6 100k 10M 100M1M 1G SMALL-SIGNAL GAIN vs. FREQUENCY M A X 4 3 8 0 -8 4 t o c0 1 FREQUENCY (Hz) G A IN ( dB ) -5 -4 -3 -2 -1 0 1 2 3 VOUT = 100mVp-p 4 -6 100k 10M 100M1M 1G LARGE-SIGNAL GAIN vs. FREQUENCY M A X 4 3 8 0 -8 4 t o c0 2 FREQUENCY (Hz) G A IN ( dB ) -5 -4 -3 -2 -1 0 1 2 3 VOUT = 2Vp-p 0.4 -0.6 100k 10M 100M1M 1G SMALL-SIGNAL GAIN FLATNESS vs. FREQUENCY M A X 4 3 8 0 -8 4 t o c0 3 FREQUENCY (Hz) G A IN ( dB ) -0.5 -0.4 -0.3 -0.2 -0.1 0 0.1 0.2 0.3 VOUT = 100mVp-p Typical Operating Characteristics (VCC = +5V, VEE = 0, VCM = +1.5V, AVCL = +1V/V, RL = 100Ω to VCC/2, TA = +25°C, unless otherwise noted.)

Page 7

M A X 4 3 8 0 – M A X 4 3 8 4 Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable 6 _______________________________________________________________________________________ Typical Operating Characteristics (continued) (VCC = +5V, VEE = 0, VCM = +1.5V, AVCL = +1, RL = 100Ω to VCC/2, TA = +25°C, unless otherwise noted.) -10 -100 100k 100M10M1M DISTORTION vs. FREQUENCY -70 -90 -30 -50 0 -60 -80 -20 -40 M A X 4 3 8 0 -8 4 t o c0 7 FREQUENCY (Hz) D IS TO R TI O N ( dB c) 2ND HARMONIC 3RD HARMONIC VOUT = 2Vp-p AVCL = +2V/V -10 -100 100k 100M10M1M DISTORTION vs. FREQUENCY -70 -90 -30 -50 0 -60 -80 -20 -40 M A X 4 3 8 0 -8 4 t o c0 8 FREQUENCY (Hz) D IS TO R TI O N ( dB c) 2ND HARMONIC 3RD HARMONIC VOUT = 2Vp-p AVCL = +5V/V -100 -70 -80 -90 -60 -50 -40 -30 -20 -10 0 0 400200 600 800 1000 1200 DISTORTION vs. RESISTIVE LOAD M A X 4 3 8 0 -8 4 t o c0 9 RLOAD (Ω) D IS TO R TI O N ( dB c) 2ND HARMONIC 3RD HARMONIC fO = 5MHz VOUT = 2Vp-p AVCL = +1V/V -100 -70 -80 -90 -60 -50 -40 -30 -20 -10 0 0.5 1.0 1.5 2.0 DISTORTION vs. VOLTAGE SWING M A X 4 3 8 0 -8 4 t o c1 0 VOLTAGE SWING (Vp-p) D IS TO R TI O N ( dB c) fO = 5MHz AVCL = +1V/V 3RD HARMONIC 2ND HARMONIC 0 100 0 100 DIFFERENTIAL GAIN AND PHASE -0.010 0 0.005 0.015 0.025 IRE D IF F P H A S E (d eg re es ) D IF F G A IN ( % ) M A X 4 3 8 0 -8 4 t o c1 1 IRE -0.005 0.020 0.010 -0.04 0.02 0.04 0.08 0.12 0 0.10 0.06 -0.02 0 -100 100k 10M 100M1M 1G COMMON-MODE REJECTION vs. FREQUENCY M A X 4 3 8 0 -8 4 t o c1 2 FREQUENCY (Hz) C M R ( dB ) -90 -80 -70 -60 -50 -40 -30 -20 -10 0.3 -0.7 100k 1M 10M 100M 1G LARGE-SIGNAL GAIN FLATNESS vs. FREQUENCY -0.5 M A X 4 3 8 0 -8 4 t o c0 4 FREQUENCY (Hz) G A IN ( dB ) -0.3 -0.1 0.1 0 -0.2 -0.4 -0.6 0.2 VOUT = 2VP-P 100k 10M1M 100M 1G OUTPUT IMPEDANCE vs. FREQUENCY M A X 4 3 8 0 -8 4 t o c0 5 FREQUENCY (Hz) IM P ED A N C E (Ω ) 100 0.01 0.1 1 10 2ND HARMONIC 3RD HARMONIC -10 -100 100k 100M10M1M DISTORTION vs. FREQUENCY -70 -90 -30 -50 0 -60 -80 -20 -40 M A X 4 3 8 0 -8 4 t o c0 6 FREQUENCY (Hz) D IS TO R TI O N ( dB c) VOUT = 2Vp-p AVCL = +1V/V

Page 8

M A X 4 3 8 0 – M A X 4 3 8 4 Ultra-Small, Low-Cost, 200MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable _______________________________________________________________________________________ 7 Typical Operating Characteristics (continued) (VCC = +5V, VEE = 0, VCM = +1.5V, AVCL = +1, RL = 100Ω to VCC/2, TA = +25°C, unless otherwise noted.) M A X 4 3 8 0 -8 4 t o c1 5 INPUT 50mV/div OUTPUT 50mV/div SMALL-SIGNAL PULSE RESPONSE 20ns/div AVCL = +1V/V INPUT 25mV/div OUTPUT 50mV/div SMALL-SIGNAL PULSE RESPONSE M A X 4 3 8 0 -8 4 t o c1 6 20ns/div RF = 500Ω AVCL = +2V/V INPUT 10mV/div OUTPUT 50mV/div SMALL-SIGNAL PULSE RESPONSE M A X 4 3 8 0 -8 4 t o c1 7 20ns/div RF = 500Ω AVCL = +5V/V INPUT 1V/div OUTPUT 1V/div LARGE-SIGNAL PULSE RESPONSE M A X 4 3 8 0 -8 4 t o c1 8 20ns/div AVCL = +1V/V INPUT 500mV/div OUTPUT 1V/div LARGE-SIGNAL PULSE RESPONSE M A X 4 3 8 0 -8 4 t o c1 9 20ns/div RF = 500Ω AVCL = +2V/V 20ns/div INPUT 200mV/div OUTPUT 1V/div LARGE-SIGNAL PULSE RESPONSE M A X 4 3 8 0 -8 4 t o c2 0 RF = 500Ω AVCL = +5V/V 0 -10 -20 -30 -40 -50 -60 -70 -80 100k 10M 100M1M 1G POWER-SUPPLY REJECTION vs. FREQUENCY M A X 4 3 8 0 -8 4 t o c1 3 FREQUENCY (Hz) P S R ( dB ) 0 0.2 0.1 0.3 0.6 0.7 0.5 0.4 0.8 0 100 150 200 25050 300 350 400 450 500 OUTPUT VOLTAGE SWING vs. RESISTIVE LOAD M A X 4 3 8 0 -8 4 t o c1 4 a RLOAD (Ω) O U TP U T V O LT A G E S W IN G ( V ) VCC - VOH VOL - VEE VSUPPLY = +5V 0 0.4 0.2 0.6 1.2 1.4 1.0 0.8 1.6 0 100 150 200 25050 300 350 400 450 500 OUTPUT VOLTAGE SWING vs. RESISTIVE LOAD M A X 4 3 8 0 -8 4 t o c1 4 b RLOAD (Ω) O U TP U T V O LT A G E S W IN G ( V ) VCC - VOH VOL - VEE VSUPPLY = ±5V

Page 9

M A X 4 3 8 0 – M A X 4 3 8 4 Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable Typical Operating Characteristics (continued) (VCC = +5V, VEE = 0, VCM = +1.5V, AVCL = +1, RL = 100Ω to VCC/2, TA = +25°C, unless otherwise noted.) 0 50 100 150 200 250 300 0 200100 300 400 500 600 700 800 SMALL-SIGNAL BANDWIDTH vs. LOAD RESISTANCE M A X 4 3 8 0 -8 4 t o c2 4 RLOAD (Ω) B A N D W ID TH ( M H z) 80 0 100 1k 10k OPEN-LOOP GAIN vs. RESISTIVE LOAD 20 10 M A X 4 3 8 0 -8 4 t o c2 5 RLOAD (Ω) O P EN -L O O P G A IN ( dB ) 40 30 50 60 70 VSUPPLY = +5V VSUPPLY = ±5V CROSSTALK vs. FREQUENCY M A X 4 3 8 0 -8 4 t o c2 6 FREQUENCY (Hz) C R O S S TA LK ( dB ) -140 -80 -100 -120 -60 -40 -20 0 20 40 60 0.1M 1M 10M 100M 1G 1 10k10010 1k 100k 1M 10M VOLTAGE NOISE vs. FREQUENCY M A X 4 3 8 0 -8 4 t o c2 1 FREQUENCY (Hz) 1 10 100 RL = 100Ω V O LT A G E N O IS E (n V /√ H z) C U R R EN T N O IS E (p A / √ H z) 1 10k10010 1k 100k 1M 10M CURRENT NOISE vs. FREQUENCY M A X 4 3 8 0 -8 4 t o c2 2 FREQUENCY (Hz) 1 10 100 RL = 100Ω 9 11 10 13 12 15 14 16 0 200100 300 40050 250150 350 450 500 ISOLATION RESISTANCE vs. CAPACITIVE LOAD M A X 4 3 8 0 -8 4 t o c2 3 CLOAD (pF) R IS O ( Ω ) 8 _______________________________________________________________________________________ SHUTDOWN RESPONSE 200ns/div 5V 1.5V VOUT MAX4380-84 toc27 DISABLE 0 0 -5 -2 -3 -4 -1 0 1 2 3 4 5 -50 0-25 25 50 75 100 INPUT OFFSET VOLTAGE vs. TEMPERATURE M A X 4 3 8 0 -8 4 t o c2 8 TEMPERATURE (°C) IN P U T O FF S ET V O LT A G E (m V ) VSUPPLY = ±5V VSUPPLY = +5V 0 4 2 8 6 10 12 -50 0 25-25 50 75 100 INPUT BIAS CURRENT vs. TEMPERATURE A 4 3 8 0 -8 4 to c2 9 TEMPERATURE (°C) IN P U T B IA S C U R R EN T (m A ) VSUPPLY = +5V VSUPPLY = ±5V

Page 10

M A X 4 3 8 0 – M A X 4 3 8 4 Ultra-Small, Low-Cost, 210MHz, Single-Supply Op Amps with Rail-to-Rail Outputs and Disable _______________________________________________________________________________________ 9 Pin Description PIN MAX4380 MAX4381 MAX4382 MAX4383 MAX4384 SC70/SOT23 µMAX QSOP SO/TSSOP SO/TSSOP SO/QSOP TSSOP NAME FUNCTION 6 10 4 4 4 4 5 VCC P osi ti ve P ow er S up pl y. C onnect a 0.1µF capaci tor to GND . 2 4 13 11 11 13 16 VEE N egati ve P ow er S up pl y. C onnect a 0.1µF C apaci tor to GND . 3 — — — — — — IN+ N oni nver ti ng Inp ut 4 — — — — — — IN- Inver ting Inp ut 1 — — — — — — OUT Am pl i fier Outp ut 5 — — — — — — DISABLE D i sab l e. C onnect to V CC to E nabl e. — 3 5 5 3 3 4 INA+ Am pl i fier A N oni nver ti ng Input — 2 6 6 2 2 3 INA- Am pl i fier A Inver ting Input — 1 7 7 1 1 2 OUTA Am pl i fier A Outp ut — 5 1 1 — — 1 DISABLEA S hutd own Amp l i fi er A. C onnect to V CC to E nab l e. — 7 12 10 5 5 6 INB+ Am pl i fier B N oni nver ti ng Input 0 3 2 1 4 5 6 7 8 9 10 -50 0-25 25 50 75 100 SUPPLY CURRENT vs. TEMPERATURE M A X 4 3 8 0 -8 4 t o c3 0 TEMPERATURE (°C) S U P P LY C U R R EN T (m A ) VSUPPLY = ±5V VSUPPLY = +5V Typical Operating Characteristics (continued) (VCC = +5V, VEE = 0, VCM = +1.5V, AVCL = +1, RL = 100Ω to VCC/2, TA = +25°C, unless otherwise noted.)

MAX4381EUB+T Reviews

Average User Rating
5 / 5 (83)
★ ★ ★ ★ ★
5 ★
75
4 ★
8
3 ★
0
2 ★
0
1 ★
0

Write a Review

Not Rated
Thanks for Your Review!

Mia *****arni

August 16, 2020

Great seller, item shipped quickly and in great packaging. I will come next time .

Brix*****Meyer

August 14, 2020

This help solved the extra electricity flowing back.

Phil*****Rhodes

August 13, 2020

Super easy to replace and labelled terminals made it a quick replacement.

Lyl*****Gour

August 7, 2020

Super easy search and order process. Lots of Shipping and Payment Options, you can always find the best way for the purchase.

Amir*****hada

August 3, 2020

To be honest, you're beating your competitor on delivery - sometimes I request 2nd day and you still get it here overnight. Thanks!

Eliza*****Davis

July 30, 2020

EXACTLY what I was looking for -- one piece with a low forward voltage drop to isolate some DC power sources. They work fantastic!

Step*****Joshi

July 25, 2020

The prices are very competitive, I've had a few transactions lately and all were smooth as glass. I'm a very satisfied customer!

Ky***** Day

July 19, 2020

Can't speak to the long term reliability as of yet, but they seem to be of decent quality and I don't expect any issues.

Jess*****nand

July 12, 2020

High level customer service, and quick response.

Ala***** Oza

July 7, 2020

They were easy to work with and did what I expected.

MAX4381EUB+T Guarantees

Service Guarantee

Service Guarantees

We guarantee 100% customer satisfaction.

Our experienced sales team and tech support team back our services to satisfy all our customers.

Quality Guarantee

Quality Guarantees

We provide 90 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.

MAX4381EUB+T Packaging

Verify Products
Customized Labels
Professional Packaging
Sealing
Packing
Insepction

MAX4381EUB+T Related Products

SIT8209AI-31-18E-166.660000Y SIT8209AI-31-18E-166.660000Y SiTIME, -40 TO 85C, 5032, 20PPM, 1.8V, 1, -, - View
1812J0100150FCR 1812J0100150FCR Knowles Syfer, CAP CER 15PF 10V C0G/NP0 1812, 1812 (4532 Metric), - View
1206J2001P40BQT 1206J2001P40BQT Knowles Syfer, CAP CER HIGH Q 1206, -, - View
AT28HC256E-70TU AT28HC256E-70TU Microchip Technology, IC EEPROM 256KBIT 70NS 28TSOP, 28-TSSOP (0.465", 11.80mm Width), - View
hot74LVX02MTCX 74LVX02MTCX Fairchild/ON Semiconductor, IC GATE NOR 4CH 2-INP 14-TSSOP, 14-TSSOP (0.173", 4.40mm Width), - View
TRM-433-LT TRM-433-LT Linx Technologies Inc., RF TXRX MODULE ISM<1GHZ, 12-SMD Module, - View
RLR07C4303GRRSL RLR07C4303GRRSL Vishay Dale, RES 430K OHM 2% 1/4W AXIAL, Axial, - View
MCR03ERTF4121 MCR03ERTF4121 Rohm Semiconductor, RES SMD 4.12K OHM 1% 1/10W 0603, 0603 (1608 Metric), - View
IDC2512ER221M IDC2512ER221M Vishay Dale, FIXED IND 220UH 200MA 3.11 OHM, 2512 (6432 Metric), - View
YK50A0523000G YK50A0523000G Amphenol Anytek, CONN BARRIER STRIP 5CIRC 0.374", -, - View
ESQT-110-03-F-D-310-001 ESQT-110-03-F-D-310-001 Samtec Inc., ELEVATED 2MM SOCKETS, -, - View
V28C3V3H50BS3 V28C3V3H50BS3 Vicor Corporation, CONVERTER MOD DC/DC 3.3V 50W, Quarter Brick, - View
Payment Methods
Delivery Services

Quick Inquiry

MAX4381EUB+T

Certified Quality

Heisener's commitment to quality has shaped our processes for sourcing, testing, shipping, and every step in between. This foundation underlies each component we sell.

ISO9001:2015, ICAS, IAF, UKAS

View the Certificates

Do you have any question about MAX4381EUB+T?

0755-83210559 ext. 805 SalesDept@heisener.com heisener007 3008774228 Send Message

MAX4381EUB+T Tags

  • MAX4381EUB+T
  • MAX4381EUB+T PDF
  • MAX4381EUB+T datasheet
  • MAX4381EUB+T specification
  • MAX4381EUB+T image
  • Maxim Integrated
  • Maxim Integrated MAX4381EUB+T
  • buy MAX4381EUB+T
  • MAX4381EUB+T price
  • MAX4381EUB+T distributor
  • MAX4381EUB+T supplier
  • MAX4381EUB+T wholesales

MAX4381EUB+T is Available in