Contact Us
SalesDept@heisener.com +86-755-83210559 ext. 811

TS931AILT

hotTS931AILT

TS931AILT

For Reference Only

Part Number TS931AILT
Manufacturer STMicroelectronics
Description IC OPAMP GP 100KHZ RRO SOT23-5
Datasheet TS931AILT Datasheet
Package SC-74A, SOT-753
In Stock 13,200 piece(s)
Unit Price $ 0.3976 *
Lead Time Can Ship Immediately
Estimated Delivery Time Aug 6 - Aug 11 (Choose Expedited Shipping)
Request for Quotation

Part Number # TS931AILT (Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps) is manufactured by STMicroelectronics and distributed by Heisener. Being one of the leading electronics distributors, we carry many kinds of electronic components from some of the world’s top class manufacturers. Their quality is guaranteed by its stringent quality control to meet all required standards.

For TS931AILT specifications/configurations, quotation, lead time, payment terms of further enquiries please have no hesitation to contact us. To process your RFQ, please add TS931AILT with quantity into BOM. Heisener.com does NOT require any registration to request a quote of TS931AILT.

TS931AILT Specifications

ManufacturerSTMicroelectronics
CategoryIntegrated Circuits (ICs) - Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
Datasheet TS931AILTDatasheet
PackageSC-74A, SOT-753
Series-
Amplifier TypeGeneral Purpose
Number of Circuits1
Output TypeRail-to-Rail
Slew Rate0.05 V/µs
Gain Bandwidth Product100kHz
-3db Bandwidth-
Current - Input Bias1pA
Voltage - Input Offset5mV
Current - Supply20µA
Current - Output / Channel5mA
Voltage - Supply, Single/Dual (±)2.7 V ~ 10 V
Operating Temperature-40°C ~ 105°C
Mounting TypeSurface Mount
Package / CaseSC-74A, SOT-753
Supplier Device PackageSOT-23-5

TS931AILT Datasheet

Page 1

Page 2

This is information on a product in full production. November 2012 Doc ID 6911 Rev 5 1/17 17 TS93x, TS93xA, TS93xB Output rail-to-rail micropower operational amplifiers Datasheet − production data Features ■ Rail-to-rail output voltage swing ■ Micropower consumption (20 μA) ■ Single supply operation (2.7 to 10 V) ■ Low offset (2 mV max. for TS93xB) ■ CMOS inputs ■ Ultra low input bias current (1 pA) ■ ESD protection (2 kV) ■ Latch-up immunity (class A) ■ Available in SO-8, SO-14, SOT23-5, and TSSOP-14 package ■ Automotive grade Applications ■ Battery powered systems ■ Portable communication systems ■ Alarms, smoke detectors ■ Instrumentation and sensoring ■ PH meters ■ Digital scales ■ Automotive Description The TS93x (single, dual and quad) series are operational amplifiers that can operate with voltages as low as 2.7 V and reach a 2.9 Vpp output swing with RL = 100 kΩ when supplied at 3 V. Offering a typical consumption of only 20 μA, these devices are particularly well suited to battery powered applications. The amplifiers space saving 5-pin SOT23-5 package with outer dimensions of 2.8 mm x 2.9 mm make them very easy to implement on a board design. Table 1. Device summary Reference Part number TS93x TS931, TS932, TS934 TS93xA TS931A, TS932A, TS934A TS93xB TS931B, TS932B, TS934B 1 2 3 5 4 VCC- VCC+ In- Out In+ TS931ILT TS934ID-TS934IDT-TS934IPT TS931ID-TS931IDT TS932ID-TS932IDT VCC- 1 2 3 54 8 7 6 N.C. N.C. In+ In- Out+ _ N.C. VCC+ In2+VCC- 1 2 3 54 8 7 6In1+ In1- Out2 + _ Out1 In2-+ _ VCC+ VCC- 1 2 3 114 14 13 12 In2+ In2- Out4 Out2 In4+ In4- 5 6 7 8 10 9 + _ + _ + _ Out3 In3+ In3- + _ Out1 In1+ In1- VCC+ Pin connections (top view) www.st.com

Page 3

Absolute maximum ratings and operating conditions TS93x, TS93xA, TS93xB 2/17 Doc ID 6911 Rev 5 1 Absolute maximum ratings and operating conditions Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCC Supply voltage (1) 1. All voltages values, except differential voltage are with respect to network terminal. 12 V Vid Differential input voltage (2) 2. Differential voltages are non-inverting input terminal with respect to the inverting input terminal. ±VCC V Vin Input voltage range (3) 3. The magnitude of input and output voltages must never exceed VCC+ +0.3 V. VCC- -0.3 to VCC+ +0.3 V Iin Input current range (4) 4. Input current must be limited by a resistor in series with the inputs. 10 mA Tstd Storage temperature range -65 to +150 °C Tj Maximum junction temperature 150 °C Rthja Thermal resistance junction-to-ambient(5) – SOT23-5 – SO8 – SO14 – TSSOP14 5. Short-circuits can cause excessive heating and destructive dissipation. 250 125 103 100 °C/W ESD HBM: human body model(6) 6. Human body model: 100 pF discharged through a 1.5 kΩ resistor into pin of device. 2 kV MM: machine model(7) 7. Machine model ESD: a 200 pF capacitor is charged to the specified voltage, then discharged directly into the IC with no external series resistor (internal resistor < 5 Ω), into pin-to-pin of device. 200 V CDM: charged device model(8) 8. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to ground through only one pin. This is done for all pins. 2 kV Latch-up immunity 200 mA Soldering temperature (10 sec.), leaded version 250 °C Table 3. Operating conditions Symbol Parameter Value Unit VCC Supply voltage 2.7 to 10 V Vicm Common mode input voltage range VCC- -0.2 to VCC+ -1.5 V Toper Operating free air temperature range -40 to +105 °C

Page 4

TS93x, TS93xA, TS93xB Electrical characteristics Doc ID 6911 Rev 5 3/17 2 Electrical characteristics Table 4 and Table 5 give the electrical characteristics at each VCC value. Table 4. Electrical characteristics at VCC+ = +3 V, VCC- = 0 V, Tamb = 25 °C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit Vio Input offset voltage TS931/2/4 TS931/2/4A TS931/2/4B 10 5 2 mV Tmin < Top < Tmax TS931/2/4 TS931/2/4A TS931/2/4B 15 10 6 ΔVio Input offset voltage drift 3 μV/°C Iio Input offset current(1) Tmin < Top < Tmax 1 100 200 pA Iib Input bias current(1) Tmin < Top < Tmax 1 150 300 pA CMR Common mode rejection ratio, 0 ≤ Vicm ≤ VCC+ -1.7 Tmin < Top < Tmax 55 55 85 85 dB SVR Supply voltage rejection ratio(2) Tmin < Top < Tmax 55 55 85 85 dB Avd Large signal voltage gain VO = 2 Vpp, RL = 1 MΩ RL = 100 kΩ 120 106 dB VOH High level output voltage, VID = 100 mV, RL = 100 kΩ Tmin < Top < Tmax 2.95 2.95 2.99 V VOL Low level output voltage, VID = -100 mV, RL = 100 kΩ Tmin < Top < Tmax 10 50 50 mV Io Output source current VID = 100 mV, VO = VCC- Output sink current VID = -100 mV, VO = VCC+ 1.5 1.5 mA ICC Supply current (per amplifier), AVCL = 1, no load Tmin < Top < Tmax 20 31 33 μA GBP Gain bandwidth product RL = 100 kΩ, CL = 50 pF 100 kHz SR Slew rate RL = 100 kΩ, CL = 50 pF 50 V/ms

Page 5

Electrical characteristics TS93x, TS93xA, TS93xB 4/17 Doc ID 6911 Rev 5 φ m Phase margin CL = 50 pF 65 Degrees en Input voltage noise 75 nV/√Hz 1. Maximum values including unavoidable inaccuracies of the industrial test. 2. VCC has a 0.2 V variation. Table 5. Electrical characteristics at VCC+ = +5 V, VCC- = 0 V, Tamb = 25 °C (unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit Vio Input offset voltage TS931/2/4 TS931/2/4A TS931/2/4B 10 5 2 mV Tmin < Top < Tmax TS931/2/4 TS931/2/4A TS931/2/4B 15 10 6 ΔVio Input offset voltage drift 3 μV/°C Iio Input offset current(1) Tmin < Top < Tmax 1 100 200 pA Iib Input bias current(1) Tmin < Top < Tmax 1 150 300 pA CMR Common mode rejection ratio, 0 ≤ Vicm ≤ VCC+ - 1.7 Tmin < Top < Tmax 55 55 85 85 dB SVR Supply voltage rejection ratio(2) Tmin < Top < Tmax 55 55 85 85 dB Avd Large signal voltage gain VO = 4 Vpp, RL = 1 MΩ RL = 100 kΩ 120 112 dB VOH High level output voltage, VID = 100 mV, RL = 100 kΩ Tmin < Top < Tmax 4.95 4.95 4.99 V VOL Low level output voltage, VID = -100 mV, RL = 100 kΩ Tmin < Top < Tmax 10 50 50 mV Io Output source current VID = 100 mV, VO = VDD Output sink current VID = -100 mV, VO = VCC 5 5 mA ICC Supply current (per amplifier), AVCL = 1, no load Tmin < Top < Tmax 20 33 35 μA Table 4. Electrical characteristics at VCC+ = +3 V, VCC- = 0 V, Tamb = 25 °C (unless otherwise specified) (continued) Symbol Parameter Min. Typ. Max. Unit

Page 6

TS93x, TS93xA, TS93xB Electrical characteristics Doc ID 6911 Rev 5 5/17 GBP Gain bandwidth product RL = 100 KΩ, CL = 50 pF 100 kHz SR Slew rate RL = 100 KΩ, CL = 50 pF 50 V/ms φm Phase margin CL = 50 pF 65 Degrees en Input voltage noise 76 nV/√Hz 1. Maximum values including unavoidable inaccuracies of the industrial test. 2. VCC has a 0.2 V variation. Table 5. Electrical characteristics at VCC+ = +5 V, VCC- = 0 V, Tamb = 25 °C (unless otherwise specified) (continued) Symbol Parameter Min. Typ. Max. Unit

Page 7

Electrical characteristics TS93x, TS93xA, TS93xB 6/17 Doc ID 6911 Rev 5 Figure 1. Input offset voltage vs. temperature Figure 2. Supply current vs. supply voltage, in open loop configuration Figure 3. Supply current vs. supply voltage in follower configuration, Vicm = Vcc/2 Figure 4. Supply current vs. temperature Figure 5. Output short-circuit current vs. temperature Figure 6. Output short-circuit current vs. supply voltage

Page 8

TS93x, TS93xA, TS93xB Electrical characteristics Doc ID 6911 Rev 5 7/17 Figure 7. Output short-circuit current vs. output voltage at VCC+ = 2.7 V Figure 8. Output short-circuit current vs. output voltage at VCC+ = 3 V v Figure 9. Output short-circuit current vs. output voltage at VCC+ = 5 V Figure 10. Output short-circuit current vs. output voltage at VCC+ = 10 V v Figure 11. High level output voltage drop vs. supply voltage Figure 12. Low level output voltage drop vs. supply voltage

Page 9

Electrical characteristics TS93x, TS93xA, TS93xB 8/17 Doc ID 6911 Rev 5 Figure 13. Voltage gain and phase vs. frequency for CL = 50 pF Figure 14. Voltage gain and phase vs. frequency for CL = 100 pF Figure 15. Distortion vs. frequency Figure 16. Equivalent input noise voltage vs. frequency Figure 17. Distortion vs. output voltage Figure 18. Supply voltage rejection vs. frequency

Page 10

TS93x, TS93xA, TS93xB Electrical characteristics Doc ID 6911 Rev 5 9/17 Figure 19. Slew rate vs. time for small input voltage signal Figure 20. Slew rate vs. time for large input voltage signal

TS931AILT Reviews

Average User Rating
5 / 5 (129)
★ ★ ★ ★ ★
5 ★
116
4 ★
13
3 ★
0
2 ★
0
1 ★
0

Write a Review

Not Rated
Thanks for Your Review!

Carl*****dwin

July 16, 2020

I took time to note down but perfect after several months of use

Thadd*****hingra

July 16, 2020

Very good connector, easy to realise and with Low price

Savan*****mphrey

July 10, 2020

Awesome components selection and availability. Ordering process is easy. They don't spam me after the purchase.

Jas*****Misra

July 8, 2020

To be honest, I think you are doing an outstanding job.

Maris*****mpbell

July 7, 2020

This product works great what more can I say.

Rile*****erta

June 21, 2020

This was a useful assortment of product that filled in a parts gap that I had on my electronic workbench. Thank you.

Jagg*****iley

June 17, 2020

Work Great. Would recommend. Only used 2. So I have 248 extras. Best deal by far that's why I got these.

Ala***** Wise

June 10, 2020

I've made a few purchases from Heisener and always get a friendly technician helped me with locate what I was looking for. That kind of attitude is greatly appreciated.

Adel*****arter

June 9, 2020

Purchased this in May and didn't use it until last week. worked and all was good.

Layt*****lvarez

May 30, 2020

Awesome buying experience, smooth transmission with the seller, and fast delivery.

TS931AILT Guarantees

Service Guarantee

Service Guarantees

We guarantee 100% customer satisfaction.

Our experienced sales team and tech support team back our services to satisfy all our customers.

Quality Guarantee

Quality Guarantees

We provide 90 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.

TS931AILT Packaging

Verify Products
Customized Labels
Professional Packaging
Sealing
Packing
Insepction

TS931AILT Related Products

MKP385356250JKI2B0 MKP385356250JKI2B0 Vishay BC Components, CAP FILM 0.056UF 5% 2.5KVDC RAD, Radial, - View
200PK47MEFC10X20 200PK47MEFC10X20 Rubycon, CAP ALUM 47UF 20% 200V RADIAL, Radial, Can, - View
LGNW6471MELC40 LGNW6471MELC40 Nichicon, CAP ALUM 470UF 20% 420V SNAP, Radial, Can - Snap-In, - View
BZX884-C8V2,315 BZX884-C8V2,315 Nexperia USA Inc., DIODE ZENER 8.2V 250MW SOD882, SOD-882, - View
hotLCMXO640C-3MN100I LCMXO640C-3MN100I Lattice Semiconductor Corporation, IC FPGA 74 I/O 100CSBGA, 100-LFBGA, CSPBGA, - View
3KASMC12AHE3_A/I 3KASMC12AHE3_A/I Vishay Semiconductor Diodes Division, TVS DIODE 12VWM 19.9VC DO214AB, DO-214AB, SMC, - View
RNC50H6490FSBSL RNC50H6490FSBSL Vishay Dale, RES 649 OHM 1/10W 1% AXIAL, Axial, - View
CRGH1206F17R4 CRGH1206F17R4 TE Connectivity Passive Product, RES SMD 17.4 OHM 1% 1/2W 1206, 1206 (3216 Metric), - View
MKJ3A7W6-4SY MKJ3A7W6-4SY ITT Cannon, LLC, CIRCULAR, -, - View
0746511402 0746511402 Molex, LLC, HSD 8 ROW 14 COL SHIELD END BP A, -, - View
89099-161LF 89099-161LF Amphenol FCI, METRAL PWR HDR 1MX5R PF, -, - View
REC5-2415DRW/H4/C/SMD REC5-2415DRW/H4/C/SMD Recom Power, CONV DC/DC 5W 18-36VIN +/-15VOUT, 24-SMD Module, 18 Leads, - View
Payment Methods
Delivery Services

Quick Inquiry

TS931AILT

Certified Quality

Heisener's commitment to quality has shaped our processes for sourcing, testing, shipping, and every step in between. This foundation underlies each component we sell.

ISO9001:2015, ICAS, IAF, UKAS

View the Certificates

Do you have any question about TS931AILT?

+86-755-83210559 ext. 811 SalesDept@heisener.com heisener007 2354944915 Send Message

TS931AILT Tags

  • TS931AILT
  • TS931AILT PDF
  • TS931AILT datasheet
  • TS931AILT specification
  • TS931AILT image
  • STMicroelectronics
  • STMicroelectronics TS931AILT
  • buy TS931AILT
  • TS931AILT price
  • TS931AILT distributor
  • TS931AILT supplier
  • TS931AILT wholesales

TS931AILT is Available in