CP Series dual low pressure sensors from superior sensor technology.This series of sensors is a highly integrated device with ADC and DSP. Two versions are available :CP201 with a three-port configuration and CP301 with a four-port configuration. The sensor features a highly reliable plastic housing that combines high performance and reliability while ensuring an optimized solution for a wide range of CPAP devices. The sensor is also ideal for BiPAP and APAP machines.
The Texas Instruments TPS56C231 is a small, high-efficiency, synchronous buck converter with an adaptive on-time D-CAP3 control mode. As external compensation is not needed, the device is simple to use and needs few external components. The device is ideal for space-constrained data centre applications.
The Renesas Electronics CK-RX65N Cloud Kit product provides a complete connectivity solution that enables engineers to rapidly prototype Internet of Things (IoT) clouds without the need for complex custom circuits and software stacks. The kit enables users to securely connect to the cloud to monitor various operational states in applications such as smart homes and buildings, healthcare, and industrial monitoring and control.
Advantech announced that its UNO family of IoT Edge gateways has qualified for AWS IoT Greengrass, an open source IoT edge runtime and cloud service that supports device software development, deployment, and management. This means that its UNO family of gateways (UNO-137, UNO-148, UNO-2271G V2, UNO-2372G, UNO-410, and UNO-430) are compatible with most mainstream cloud services and pre-built software components, providing an ideal platform for cost-effective on-premise software development.
Diodes Inc. introduces new transistor array products. The ULN62003A consists of seven 500mA rated open-drain transistors with all source terminals connected to the same ground pin. This array of high-current transistors can drive a variety of loads, such as solenoses, relays, DC motors and LED displays, and is designed for climate control and home appliances
Würth Electronics presents new EDLC supercapacitors (Electrical Double Layer Capacitors) with snap-in terminals. Available in 100 F and 350 F capacities, the WCAP-SISC series is the perfect solution for high power and high energy demands such as UPS and energy storage products
TDK's MLJ-G series of multilayer inductors are targeted for automotive power over coaxial (PoC) implementations. MLJ1608WG series inductors achieve a maximum impedance of 2500 Ω. They also retain an impedance level of 1000 Ω in the frequency range from 300 MHz to 2 GHz. Although these components measure 1.6 mm (L) x 0.8 mm (W) x 0.8 mm (H), they still support a high current rating of 500 mA.
ADI's LTM4660 complete 300 W output switch-mode mixed-topology step-down DC/DC μModule (micromodule) non-isolated bus converter provides an efficient/high-density and cost-effective solution for power distribution, datacom, and telecom applications. The LTM4660 is housed in a 16mm × 16mm × 10.34 mm BGA package with RoHS-compliant terminations.
Sensirion announces the STS4xA family of digital temperature sensors designed for automotive applications with high reliability. The sensor platform supports automatic optical inspection and is equipped with an advanced on-board diagnostic system. Two models are currently included: the STS41A-AD1B and the STS41A-AW1B, the latter being an optional wettable flank package that supports automated optical inspection. In addition, the on-chip integrated heater enables advanced On-Board Diagnostics (OBD), enabling functional and plausibility diagnostics rather than just simple status checks.
Transphorm, Inc. announced that it has won a contract from the U.S. Department of Energy's Advanced Energy Research Program (ARPA-E). The project, part of the ArPA-E CIRCUITS program, is being conducted through a subcontract with the Illinois Institute of Technology and includes the supply of gallium nitride based four-quadrant bidirectional switches (FQS). These switches can be used in a variety of power conversion applications, such as current source inverters, frequency converters for drivers and micro inverters, matrix switches and solid state circuit breakers, and other novel applications
STMicroelectronics has introduced its new generation FlightSense™ Time-of-flight (ToF) multi-zone sensor. The product, together with a set of practical software algorithms, constitutes a comprehensive solution for user detection, gesture recognition and intrusion alarm designed for the PC market.
Skyworks has released its portfolio of network synchronisation solutions for 5G networks. Enabling mobile operators deploying 5G fronthaul equipment to provide next-generation mobile connectivity for customers, its latest network synchronisation portfolio offers the timing precision, accuracy and reliability required for high-speed 5G network performance.
STMicroelectronics has released the IPS1025HF fast-starting high-side power switch for employment in safety systems requiring minimal power-on delay time.
Advantech has released a pair of new SQFlash PCIe Gen.4 SSD solutions: the SQF 930 and SQF ER-1. IoT is forcing growing demand for high-performance storage. Consequently, the solutions provide industrial heat dissipation capabilities that secure stable operation and reliability and meet the unique challenges presented by edge computing. These solutions are created to maximise system efficiency while accommodating the various harsh conditions and wide temperatures found in outdoor/industrial usage scenarios.
OmniVision released a new 50-megapixel image sensor OV50E. This sensor can provide industry-leading low-light image and high dynamic range (HDR) video capture capabilities for the rear main camera of mid-to-high-end smartphones. The OV50E features interlaced HDR and patented DCG technology to extend dynamic range and reduce motion artifacts in challenging lighting conditions, plus a built-in dual-conversion gain combination for single-exposure HDR support
The newly launched ultra-compact and ultra-thin photoelectric sensor OS4 is only 20×12×4.1mm in size and 11mm in universal mounting hole spacing, which is suitable for installation in a narrow space. It provides compact photoelectric sensor solutions for 3C, electronics, semiconductors, lithium, mechanical arms, small equipment, etc.
ROHM has developed an in-vehicle LDO regulator*1 IC "BD9xxN1 series, BD9xxN1 series" as an in-vehicle primary (12V battery) power supply for a wide range of in-vehicle applications such as automotive powertrain systems, body and automotive infotainment systems. A series of new products meet the requirements of automotive products working above 125℃ and the reliability standard "AEC-Q100" for automotive electronic products, and also meet the basic requirements of primary power input voltage above 40V
Infineon's portfolio of reliable RF products is customer-oriented. Continuously deepen the understanding of the system to provide the best RF technology products for reliable wireless connection. Infineon enhances the user experience by enabling devices to achieve higher data rates, better signal quality, and longer battery life. Its RF solutions are available for smartphones, laptops, tablets, wearables, drones, access points, and a variety of smart appliances.
