Vishay Intertechnology, Inc announced that the first Vishay 19.0mm x 17.1mm x 7.0mm 6767 dimensions, IHSR high temperature inductor -- IHSR-6767GZ-5A with rated current up to 155 A in accordance with AEC-Q200 standard. Designed for multiphase high-current power supplies and input/output filters for applications such as automotive engine compartments and advanced driver assistance systems (ADAS), the Vishay Dale IHSR-6767GZ-5A offers a 50% reduction in internal DC resistance (DCR) compared to conventional power inductors and is smaller in size than similar ferrite solutions.
Microchip Technology's PIC16F18015/25/44/45 and PIC16F18126/46 series MCU. Designed specifically for developers who need an 8-bit MCU to accompany sensor design, these two series are rich in features that provide a low-cost solution for sensor signal conditioning and real-time control.
ST's TSB582 dual high-output amplifier simplifies driving circuits for inductive and low-resistive loads such as industrial motors, valves, resolvers, and automotive electric steering systems, and automatic parking.
C&K has a gold-plated version for its sliding switch line. The gold plate has been applied to AYZ series micro sliding switch, JS series super micro sliding switch and PCM series super micro surface mount sliding switch, the gold plate product performance and environmental protection have been enhanced.
The PIC16F18015/25/44/45 and PIC16F18126/46 families of microcontrollers are from Microchip Technology. These two families of sensors are specifically designed for developers who require 8-bit microcontrollers, offering a variety of feature-rich features to support sensor signal conditioning and real-time control capabilities at an affordable price.
TDK Corporation (TSE:6762) announces the launch of the MLJ1608WG series of new multilayer inductors. This compact component is designed for use in automotive Power over Coax (PoC), the new inductor family provides high impedance over a wide frequency range Impedance changes during current application compared to competitor inductors Significantly lower for more efficient power transfer Compact form factor saves valuable space
Burns has announced a new line of high-power fuse models. The POWrFuse model PF-K series is designed specifically to meet the ISO 8820-8 standard for protecting high-voltage accessory circuits in electric and hybrid vehicles.
Vishay Intertechnology, Inc introduced the first AEC-Q200 qualified IHSR high-temperature inductor with current ratings to 155A in the 19mm x 17.1mm x 7mm 6767 case size. Intended for multi-phase, high current power supplies and input/output filters in automotive under the hood and ADAS applications, the Vishay Dale IHSR-6767GZ-5A provides a 50% reduction in DCR over typical power inductors and a smaller size than comparable ferrite-based solutions.
ams Osram has launched the AS705x series of analog front ends with functional units that improve the performance of PPG measurements. With the AS7056 and AS7057, ams Osram has the smallest analog front end (AFE) on the market today and offers a one-stop product portfolio including AFE, custom optical front end and all necessary building blocks, ideal for space-constrained applications. application on a listening device or accessory.
Advanced Energy Industries, Inc has expanded the TEGAM 700 series of bond meters with two handheld measurement tools. The TEGAM 720A and TEGAM 730A bond meters are ideal for use in the manufacture and maintenance of aerospace, automotive, renewable energy equipment and other applications where testing of the integrity of mechanical and electrical bonds is a crucial necessity.
Toshiba Electronic Components & Storage Corporation announced the launch of a new power device, the third-generation silicon carbide (SiC) MOSFET "TWxxNxxxC series". This series features low on-resistance, which significantly reduces switching losses. The 10 products in this series include 5 1200V products and 5 650V products
ROHM has developed a step-down DC-DC converter IC*1 "BD9S402MUF-C" for increasingly complex in-vehicle applications such as ADAS (advanced driver assistance systems) and infotainment systems including in-vehicle sensors and cameras. The new products meet the requirements of the increasingly high-performance SoC (System on a Chip) and secondary side*2 power supply applications of microcontrollers with small size, 4A output current, switching operating frequency above 2MHz, and 0.6V low-voltage output
Renesas Electronics announced the launch of a new generation of Si-IGBT (Silicon-Based Insulated Gate Bipolar Transistor) devices that deliver lower power losses in a smaller size. For next-generation electric vehicle (EVs) inverter applications, mass production of AE5-generation IGBT products will begin in the first half of 2023 at Renesas' 200mm and 300mm wafer lines in Naka, Japan
Diodes Incorporated announces a family of bidirectional current displays featuring a high stability zero-drift architecture. These devices are capable of accurately measuring very low sense voltages over a wide common-mode voltage range. Key product applications include notebook computers, battery chargers, industrial servos, servers, power racks in server farms, and robotic systems.
Diodes has introduced the AL5873Q three-channel linear LED driver, expanding the size of the device portfolio that supports automotive exterior lighting to simplify the design of automotive rear lighting groups. This automotive AEC-Q100 Grade 1 qualified unit, rated to operate at an ambient temperature of 125°C, meets the requirements of next-generation automotive designs while saving energy and space and reducing overall system cost
With WE-BMS, Würth Elektronik supplies signal transformers for battery management systems, which are excellent for use in energy storage systems, e-bikes or e-scooters due to the galvanically isolated 4300VDC/1min and high operating voltages up to 1000VDC. Different sizes from 9.5mm x 5.5mm to 15.1mm x 15.4mm x 3.45mm.
Infineon Technologies AG has introduced new HYPERRAM 3.0 devices to further complement its high-bandwidth, low-pin-count memory solutions. The device has a new 16-bit extended HyperBus interface, which can double the throughput to 800MBps. The data throughput per pin of the new HYPERRAM3.0 memory solution is much higher than that of PSRAM, SDR DRAM and other existing technologies on the market. .
RECOM's RMD500 series 500 W DC/DC converters are designed to meet the specific requirements of transportation, especially rail cars. They have a 4:1 input voltage range, covering 43 VDC to 137.5 VDC (nominal values are 72 V and 110 V, respectively) input voltages, with isolated and stabilized 24 V outputs. The RMD500 series achieves this specification with an enhanced isolation system
