Contact Us
SalesDept@heisener.com 0755-83210559 ext. 805

RN60C1181FB14

RN60C1181FB14

RN60C1181FB14

For Reference Only

Part Number RN60C1181FB14
Manufacturer Vishay Dale
Description RES 1.18K OHM 1/4W 1% AXIAL
Datasheet RN60C1181FB14 Datasheet
Package Axial
In Stock 359 piece(s)
Unit Price $ 1.0500 *
Lead Time To be Confirmed
Estimated Delivery Time Dec 6 - Dec 11 (Choose Expedited Shipping)
Request for Quotation

Part Number # RN60C1181FB14 (Through Hole Resistors) is manufactured by Vishay Dale and distributed by Heisener. Being one of the leading electronics distributors, we carry many kinds of electronic components from some of the world’s top class manufacturers. Their quality is guaranteed by its stringent quality control to meet all required standards.

For RN60C1181FB14 specifications/configurations, quotation, lead time, payment terms of further enquiries please have no hesitation to contact us. To process your RFQ, please add RN60C1181FB14 with quantity into BOM. Heisener.com does NOT require any registration to request a quote of RN60C1181FB14.

RN60C1181FB14 Specifications

ManufacturerVishay Dale
CategoryResistors - Through Hole Resistors
Datasheet RN60C1181FB14Datasheet
PackageAxial
SeriesMilitary, MIL-R-10509/1, RN60
Resistance1.18 kOhms
Tolerance±1%
Power (Watts)0.25W, 1/4W
CompositionMetal Film
FeaturesFlame Retardant Coating, Military, Moisture Resistant, Safety
Temperature Coefficient±50ppm/°C
Operating Temperature-65°C ~ 175°C
Package / CaseAxial
Supplier Device PackageAxial
Size / Dimension0.145" Dia x 0.344" L (3.68mm x 8.74mm)
Height - Seated (Max)-
Number of Terminations2
Failure Rate-

RN60C1181FB14 Datasheet

Page 1

Page 2

CMF (Military RN and RL) www.vishay.com Vishay Dale Revision: 16-Sep-16 1 Document Number: 31027 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Metal Film Resistors, Axial, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL FEATURES • Very low noise (-40 dB) • Very low voltage coefficient (5 ppm/V) • Controlled temperature coefficient • Flame retardant epoxy coating • Commercial alternatives to military styles are available with higher power ratings. See CMF Industrial data sheet: (www.vishay.com/doc?31018) Notes (1) Continuous working voltage shall be or maximum working voltage, whichever is less. (2) Formerly rated at 1 W and is the direct replacement for RN70 of MIL-R-10509 rev. D. (3) Tolerances of ± 0.1 %, ± 0.25 % and ± 0.5 % are not applicable to characteristic D. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL MIL STYLE MIL SPEC. SHEET POWER RATING P70 °C W POWER RATING P125 °C W MAX. WORKING VOLTAGE (1) V RESISTANCE RANGE  MIL-R-10509 ± 100 ppm/°C (D) RESISTANCE RANGE  MIL-R-10509 ± 50 ppm/°C (C) RESISTANCE RANGE  MIL-R-10509 ± 25 ppm/°C (E) RESISTANCE RANGE  MIL-PRF-22684 TOL. (3) ± % DIELECTRIC STRENGTH VAC CMF50 RN50 08 - 0.05 200 - 10 to 100K 10 to 100K - 0.1, 0.25, 0.5, 1 450 CMF55 RN55 07 0.125 0.10 200 10 to 301K 49.9 to 100K 49.9 to 100K - 0.1, 0.25, 0.5, 1 450 CMF60 RN60 01 0.25 0.125 300 10 to 1M 49.9 to 499K 49.9 to 499K - 0.1, 0.25, 0.5, 1 500 CMF65 RN65 02 0.50 0.25 350 10 to 2M 49.9 to 1M 49.9 to 1M - 0.1, 0.25, 0.5, 1 900 CMF70 RN70 03 0.75 (2) 0.50 500 10 to 2.49M 24.9 to 1M 24.9 to 1M - 0.1, 0.25, 0.5, 1 900 CMF07 RL07 01 0.25 - 250 - - - 51 to 150K 2, 5 450 CMF20 RL20 02 0.50 - 350 - - - 4.3 to 470K 2, 5 700 TECHNICAL SPECIFICATIONS PARAMETER UNIT CONDITION Voltage Coefficient ppm/V 5 when measured between 10 % and full rated voltage Insulation Resistance   1010 min. dry;  108 min. after moisture test Operating Temperature Range °C -65/+175 (see derating curves for military range) Terminal Strength Ib 5 pound pull test for RL07/RL20; 2 pound pull test for all others Solderability Continuous satisfactory coverage when tested in accordance with MIL-R-10509 and MIL-PRF-22684 P x R

Page 3

CMF (Military RN and RL) www.vishay.com Vishay Dale Revision: 16-Sep-16 2 Document Number: 31027 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note • For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544). APPLICABLE MIL-SPECS MIL-R-10509 and MIL-PRF-22684: The CMF models meet or exceed the electrical, environmental and dimensional requirements of MIL-R-10509 and MIL-PRF-22684. Noise: Vishay Dale metal film resistors have exceptionally low noise level. Average for standard resistance range is 0.10 μV per V over a decade of frequency, with low and intermediate resistance values typically below 0.05 μV per V. GLOBAL PART NUMBER INFORMATION MIL STYLE TOLERANCE CODE RN50 E = 25 ppm 3 digit significant B = ± 0.1 % RN55 C = 50 ppm figure, followed by C = ± 0.25 % D = ± 0.5 % 0R01 = 10 Ω 2512 = 21.5 k Ω 2494 = 2.49 M Ω New Global Part Numbering: RN60D3483FR36 (preferred part numbering format) R N 6 0 D 3 4 8 3 F R 3 6 Historical Part Number example: RN60D3483F (will continue to be accepted) 3483DRN60 MIL STYLE CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE PACKAGING RN65 RN70 RN60 = 100 ppm a multiplierD F = ± 1 % Blank = standard (Dash number) 88 = hot solder dip 143 = non-magnetic R36F PACKAGING SPECIALCHARACTERISTIC RESISTANCE VALUE B14 = tin/lead, bulk BSL = tin/lead, bulk, single lot date code R36 = tin/lead, T/R (full) RE6 = tin/lead, T/R (1000 pieces) RSL = tin/lead, T/R, single lot date code Use “R” for values < 100 Ω MIL STYLE TOLERANCE CODE PACKAGING RL07 S = solderable 2 digit significant G = ± 2 % B14 = tin/lead, bulk BSL = tin/lead, bulk, single lot date code R36 = tin/lead, T/R (full) RE6 = tin/lead, T/R (1000 pieces) RSL = tin/lead, T/R, single lot date code RL20 figure, followed by J = ± 5 % a multiplier 4R3 = 4.3 Ω 202 = 2.0 k Ω 474 = 470 k Ω New Global Part Numbering: RL07S471JR36 (preferred part numbering format) Historical Part Number example: RL07S471J (will continue to be accepted) MIL STYLE LEAD MATERIAL RESISTANCE VALUE TOLERANCE CODE PACKAGING R L 0 7 S 4 7 1 J R 3 6 RL07 S 471 J R36 LEAD MATERIAL RESISTANCE VALUE Use “R” for values < 10 Ω SPECIAL Blank = standard (Dash number) 88 = hot solder dip 143 = non-magnetic MATERIAL SPECIFICATIONS Element Nickel-chrome alloy Coating Flame retardant epoxy, formulated for superior moisture protection Core Fire-cleaned high purity ceramic Termination Standard lead material is solder-coated copper. Solderable and weldable. CAGE CODE: 91637 ENVIRONMENTAL SPECIFICATIONS General Environmental performance is shown in the Environmental Performance table. Test methods are those specified in MIL-R-10509 and MIL-PRF-22684. Shelf Life Resistance shifts due to storage at room temperature are negligible.

Page 4

CMF (Military RN and RL) www.vishay.com Vishay Dale Revision: 16-Sep-16 3 Document Number: 31027 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Vishay Dale CMF resistors have an operating temperature range of -65 °C to +175 °C. They must be derated according to the following curves: DIMENSIONS in inches (millimeters) Note (1) Lead length for product in bulk pack. For product supplied in tape and reel, the actual lead length would be based on the body size, tape spacing and lead trim. Notes • Commercial equivalents of military styles are available with higher power ratings. Consult factory. (1) Formerly rated at 1 W and is the direct replacement for RN70 of MIL-R-10509 rev. D. VISHAY DALE MODEL A B C (MAX.) D CMF50 0.150 ± 0.020 (3.81 ± 0.51) 0.065 ± 0.015 (1.65 ± 0.38) 0.244 (6.20) 0.016 ± 0.002 (0.41 ± 0.05) CMF55 0.240 ± 0.020 (6.10 ± 0.51) 0.090 ± 0.008 (2.29 ± 0.20) 0.290 (7.37) 0.025 ± 0.002 (0.64 ± 0.05) CMF60 0.344 ± 0.031 (8.74 ± 0.79) 0.145 ± 0.015 (3.68 ± 0.38) 0.425 (10.80) 0.025 ± 0.002 (0.64 ± 0.05) CMF65 0.562 ± 0.031 (14.27 ± 0.79) 0.180 ± 0.015 (4.57 ± 0.38) 0.687 (17.45) 0.025 ± 0.002 (0.64 ± 0.05) CMF70 0.562 ± 0.031 (14.27 ± 0.79) 0.180 ± 0.015 (4.57 ± 0.38) 0.687 (17.45) 0.032 ± 0.002 (0.81 ± 0.05) CMF07 0.240 ± 0.020 (6.10 ± 0.51) 0.090 ± 0.008 (2.29 ± 0.20) 0.290 (7.37) 0.025 ± 0.002 (0.64 ± 0.05) CMF20 0.375± 0.040 (9.53 ± 1.02) 0.145 ± 0.015 (3.68 ± 0.38) 0.425 (10.80) 0.032 ± 0.002 (0.81 ± 0.05) MILITARY POWER RATING WATTAGE MILITARY QUALIFIED MIL-R-10509 MIL-PRF-22684 AT +70 °C (D) AT +125 °C (C and E) AT +70 °C 0.05 - RN50 - 0.10 - RN55 - 0.125 RN55 RN60 - 0.25 RN60 RN65 RL07 0.50 RN65 RN70 RL20 0.75 (1) RN70 - - R E W O P D E T A R F O % AMBIENT TEMPERATURE °C 120 100 80 60 40 20 0 MIL-R-10509 Char. C and E Rating MIL-R-10509 Char. D Rating MIL-PRF-22684 DERATING 170150130110907050 A B DC (Max.) 1.50 ± 0.125 (1) (38.10 ± 3.18)

Page 5

CMF (Military RN and RL) www.vishay.com Vishay Dale Revision: 16-Sep-16 4 Document Number: 31027 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note • RL series are color banded per MIL-PRF-22684. MARKING (per MIL-PRF-10509) Characteristics: D = 100 ppm, C = 50 ppm, E = 25 ppm Tolerance: F = 1 %, D = 0.5 %, C = 0.25 %, B = 0.1 % Value = Three significant figures and multiplier J = JAN (Joint Army - Navy) brand RN50: (3 lines) RN55, RN60, RN65, RN70 (4 lines) J50D 1211 F137 JAN, type, characteristic Value Tolerance and 3 digit date code DALE 0137J RN55D 1211F Company logo 4 digit date code and JAN brand Type and characteristic Value and Tolerance PERFROMANCE REQUIREMENT MIL-R-10509 MIL-PRF-22684 CHARACTERISTIC D CHARACTERISTIC C CHARACTERISTIC E MIL Temperature Coefficient +200 ppm/°C -500 ppm/°C ± 50 ppm/°C ± 25 ppm/°C ± 200 ppm/°C Applicable Vishay Dale Temperature Coefficient ± 100 ppm/°C ± 50 ppm/°C ± 25 ppm/°C ± 200 ppm/°C TEST MILmax. MILmax. MILmax. MILmax. Thermal Shock ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 1.00 % R Short Time Overload ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 0.50 % R Low Temperature Operation ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 0.50 % R Moisture Resistance ± 1.50 % R ± 0.50 % R ± 0.50 % R ± 1.50 % R Shock ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 0.50 % R Vibration ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 0.50 % R Load Life ± 1.00 % R ± 0.50 % R ± 0.50 % R ± 2.00 % R Dielectric Withstanding Voltage ± 0.50 % R ± 0.25 % R ± 0.25 % R ± 0.50 % R Effect of Solder ± 0.50 % R ± 0.10 % R ± 0.10 % R ± 0.50 % R THERMAL RESISTANCE 0 20 40 60 80 100 120 APPLIED POWER IN W H E A T R IS E ( °C A B O V E A M B IE N T ) 0 0.125 0.25 0.375 0.5 0.625 0.75 0.875 1 1.125 CMF65, CMF70 CMF50 CMF55 CMF60 CMF20 CMF07

RN60C1181FB14 Reviews

Average User Rating
5 / 5 (132)
★ ★ ★ ★ ★
5 ★
119
4 ★
13
3 ★
0
2 ★
0
1 ★
0

Write a Review

Not Rated
Thanks for Your Review!

Ami*****halsa

November 17, 2020

Good and works well. What else is there to say about it.

RN60C1181FB14 Guarantees

Service Guarantee

Service Guarantees

We guarantee 100% customer satisfaction.

Our experienced sales team and tech support team back our services to satisfy all our customers.

Quality Guarantee

Quality Guarantees

We provide 90 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.

RN60C1181FB14 Packaging

Verify Products
Customized Labels
Professional Packaging
Sealing
Packing
Insepction

RN60C1181FB14 Related Products

1808Y2000180JFR 1808Y2000180JFR Knowles Syfer, CAP CER 18PF 200V C0G/NP0 1808, 1808 (4520 Metric), Military, MIL-R-10509/1, RN60 View
M30R105K5-F M30R105K5-F Cornell Dubilier Electronics (CDE), CAP CER 1UF 50V X7R RADIAL, Radial, Military, MIL-R-10509/1, RN60 View
B72220S0250K151 B72220S0250K151 EPCOS (TDK), VARISTOR 39V 2KA DISC 20MM, Disc 20mm, Military, MIL-R-10509/1, RN60 View
hot023001.5DRT1W 023001.5DRT1W Littelfuse Inc., FUSE GLASS 1.5A 250VAC 2AG, Cartridge, Non-Standard (Axial), Military, MIL-R-10509/1, RN60 View
3413.0332.24 3413.0332.24 Schurter Inc., FUSE BOARD MOUNT 25A 32VAC 63VDC, 1206 (3216 Metric), Military, MIL-R-10509/1, RN60 View
D55342H07B475ERWS D55342H07B475ERWS Vishay Dale, RES SMD 475K OHM 1% 1/4W 1206, 1206 (3216 Metric), Military, MIL-R-10509/1, RN60 View
RCS3216F242CS RCS3216F242CS Samsung, RESISTOR 1206 2.4KOHM 0.25W, -, Military, MIL-R-10509/1, RN60 View
691312710003 691312710003 Wurth Electronics Inc., TERM BLOCK HDR 3POS 90DEG 5MM, -, Military, MIL-R-10509/1, RN60 View
FW-49-03-L-D-163-090 FW-49-03-L-D-163-090 Samtec Inc., .050'' BOARD SPACERS, -, Military, MIL-R-10509/1, RN60 View
DW-02-10-L-D-531 DW-02-10-L-D-531 Samtec Inc., .025" BOARD SPACERS, -, Military, MIL-R-10509/1, RN60 View
ECA30DRMZ-S664 ECA30DRMZ-S664 Sullins Connector Solutions, CONN EDGE DUAL FMALE 60POS 0.125, -, Military, MIL-R-10509/1, RN60 View
VI-J22-EX VI-J22-EX Vicor Corporation, CONVERTER MOD DC/DC 15V 75W, Half Brick, Military, MIL-R-10509/1, RN60 View
Payment Methods
Delivery Services

Quick Inquiry

RN60C1181FB14

Certified Quality

Heisener's commitment to quality has shaped our processes for sourcing, testing, shipping, and every step in between. This foundation underlies each component we sell.

ISO9001:2015, ICAS, IAF, UKAS

View the Certificates

Do you have any question about RN60C1181FB14?

0755-83210559 ext. 805 SalesDept@heisener.com heisener007 3008774228 Send Message

Featured Products

RJR26FW102R

TRIMMER 1K OHM 0.25W PC PIN

M74HC390B1R

IC DECADE COUNTER DUAL 16-DIP

L6563H

IC PFC CTRLR TRANSITION 16SOIC

PCA9543APW,118

IC I2C SWITCH 2CH 14-TSSOP

3314G-1-103E

TRIMMER 10K OHM 0.25W SMD

FDN360P

MOSFET P-CH 30V 2A SSOT3

APT1608F3C

EMITTER IR 940NM 50MA 603

TMP36GT9Z

SENSOR TEMP ANLG VOLT TO-92-3

MIC2025-1YM

IC SW DISTRIBUTION 1CHAN 8SOIC

AZ23C6V2-7-F

DIODE ZENER ARRAY 6.2V SOT23-3

View More >>

RN60C1181FB14 Tags

  • RN60C1181FB14
  • RN60C1181FB14 PDF
  • RN60C1181FB14 datasheet
  • RN60C1181FB14 specification
  • RN60C1181FB14 image
  • Vishay Dale
  • Vishay Dale RN60C1181FB14
  • buy RN60C1181FB14
  • RN60C1181FB14 price
  • RN60C1181FB14 distributor
  • RN60C1181FB14 supplier
  • RN60C1181FB14 wholesales

RN60C1181FB14 is Available in