RNC55H5110BRB14

Page 1

Page 2

ERC (Military RNC/RNR) www.vishay.com Vishay Dale Revision: 16-Sep-16 1 Document Number: 31025 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Metal Film Resistors, Axial, Military/Established Reliability, MIL-PRF-55182 Qualified, Precision, Type RNC, Characteristics J, H, K FEATURES • Meets requirements of MIL-PRF-55182 • Very low noise (-40 dB) • Verified failure rate (contact factory for current level) • 100 % stabilization and screening tests. Group A testing, if desired, to customer requirements • Controlled temperature coefficient • Epoxy coating provides superior moisture protection • Standard lead on RNC product is solderable and weldable • Traceability of materials and processing • Monthly acceptance testing • Vishay Dale has complete capability to develop specific reliability programs designed to customer requirements • Extensive stocking program at distributors and factory on RNC50, RNC55, RNC60 and RNC65 • For MIL-PRF-55182 characteristics E and C product, see Vishay Angstrohm’s HDN (Military RNR/RNN) datasheet (www.vishay.com/doc?66001) Notes (1) Consult factory for current QPL failure rates. (2) Continuous working voltage shall be or maximum working voltage, whichever is less. (3) Hot solder dipped leads. (4) Tolerance of ± 0.1 % is not applicable to characteristics K. STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL MIL-PRF-55182 STYLE MIL SPEC. SHEET POWER RATING P70 °C W POWER RATING P125 °C W TOLERANCE (4) ± % MAXIMUM WORKING VOLTAGE (2) V RESISTANCE RANGE  TEMPERATURE COEFFICIENT ± ppm/°C LIFE FAILURE RATE (1) ERC50, ERC50..31 (3) RNC50, RNR50 07 0.10 0.05 0.1, 0.5, 1 200 10 to 796K 100 (K), 50 (H), 25 (J) M, P, R, S ERC55, ERC55..65 (3) RNC55, RNR55 01 0.125 0.10 0.1, 0.5, 1 200 10 to 2M 100 (K), 50 (H), 25 (J) M, P, R, S ERC55..200, ERC55..201 (3) RNC60, RNR60 03 0.25 0.125 0.1, 0.5, 1 250 10 to 2M 100 (K), 50 (H), 25 (J) M, P, R, S 2.01M to 3.01M 100 (K), 50 (H), 25 (J) M ERC65, ERC65..65 (3) RNC65, RNR65 05 0.50 0.25 0.1, 0.5, 1 300 10 to 3.01M 100 (K), 50 (H), 25 (J) M, P, R ERC70 ERC70..4 (3) RNC70, RNR70 06 0.75 0.50 0.1, 0.5, 1 350 10 to 3.01M 100 (K), 50 (H), 25 (J) M, P, R TECHNICAL SPECIFICATIONS PARAMETER UNIT CONDITION Voltage Coefficient, max. ppm/V 5/V when measured between 10 % and full rated voltage Dielectric Strength VAC RNC50, RNC55 and RNC60 = 450; RNC65 and RNC70 = 900 Insulations Resistance   1011 dry;  109 after moisture test Operating Temperature Range °C -65 to +175 Terminal Strength lb 2 lb pull test on RNC50, RNC55, RNC60 and RNC65; 4.5 lb pull test on RNC70 Solderability Continuous satisfactory coverage when tested in accordance with MIL-STD-202, method 208 Weight g RNC50 = 0.11; RNC55 = 0.35; RNC60 = 0.35; RNC65 = 0.84; RNC70 = 1.06 P x R

Page 3

ERC (Military RNC/RNR) www.vishay.com Vishay Dale Revision: 16-Sep-16 2 Document Number: 31025 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note • For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544). DIMENSIONS in inches (millimeters) Note (1) Lead length for product in bulk pack. For product supplied in Tape and Reel, the actual lead length would be based on the body size, tape spacing and lead trim. POWER RATING Power ratings are based on the following two conditions: 1. ± 2.0 % maximum R in 10 000 h load life 2. +175 °C maximum operating temperature APPLICABLE MIL-SPECIFICATIONS MIL-PRF-55182: The ERC series meets the electrical, environmental and dimensional requirements of MIL-PRF-55182. MIL-R-10509: MIL-PRF-55182 supersedes MIL-R-10509 on new designs. The ERC series meets or exceeds MIL-R-10509 requirements. DOCUMENTATION: Qualification and failure rate verification test data is maintained by Vishay Dale and is available upon request. Lot traceability and identification data is maintained by Vishay Dale for five years. GLOBAL PART NUMBER INFORMATION New Global Part Numbering: RNC55H2152FRR36 (preferred part numbering format) MIL STYLE CHARACTERISTICS RESISTANCE VALUE TOLERANCE CODE FAILURE RATE PACKAGING SPECIAL RNC = solderable/ weldable RNR = solderable only (see Standard Electrical Specifications table) J = ± 25 ppm H = ± 50 ppm K = ± 100 ppm 3 digit significant figure, followed by a multiplier Use “R” for values < 100  10R0 = 10  2152 = 21.5 k 3014 = 3.01 M B = ± 0.1 % D = ± 0.5 % F = ± 1 % M = 1.0 %/1000 h P = 0.1 %/1000 h R = 0.01 %/1000 h S = 0.001 %/1000 h B14 = tin/lead, bulk BSL = tin/lead, bulk, single lot date code R36 = tin/lead, T/R (full; 50, 55, 60) R64 = tin/lead, T/R (full; 65, 70) RE6 = tin/lead, T/R (1000 pieces) RSL = tin/lead, T/R, single lot date code Blank = standard (Dash number) (Up to 3 digits) From 1 to 999 as applicable 4 = hot solder dip (70’s) 31 = hot solder dip (50’s) 65 = hot solder dip (55’s, 65’s) 201 = hot solder dip (60’s) Historical Part Number Example: RNC55H2152FR R36 (will continue to be accepted) RNC55 H 2152 F R R36 MIL STYLE CHARACTERISTIC RESISTANCE VALUE TOLERANCE CODE FAILURE RATE PACKAGING VISHAY DALE MODEL MIL-PRF-55182 STYLE A B C (MAX.) D E ERC50 RNC50, RNR50 0.150 ± 0.020 (3.81 ± 0.51) 0.070 ± 0.010 (1.78 ± 0.25) 0.187 (4.75) 0.016 ± 0.002 (0.41 ± 0.05) 1.25 ± 0.266 (31.75 ± 6.76) ERC55 RNC55, RNR55 0.250 + 0.031 - 0.046 (6.35 + 0.79 - 1.17) 0.094 ± 0.012 (2.39 ± 0.30) 0.300 (7.62) 0.025 ± 0.002 (0.64 ± 0.05) 1.50 ± 0.125 (38.1 ± 3.18) ERC55..200 RNC60, RNR60 0.280 ± 0.020 (7.11 ± 0.51) 0.097 ± 0.012 (2.46 ± 0.30) 0.350 (8.89) 0.025 ± 0.002 (0.64 ± 0.05) 1.50 ± 0.125 (38.1 ± 3.18) ERC65 RNC65, RNR65 0.562 ± 0.031 (14.27 ± 0.79) 0.180 ± 0.015 (4.57 ± 0.38) 0.687 (17.45) 0.025 ± 0.002 (0.64 ± 0.05) 1.50 ± 0.125 (38.1 ± 3.18) ERC70 RNC70, RNR70 0.562 ± 0.031 (14.27 ± 0.79) 0.180 ± 0.015 (4.57 ± 0.38) 0.687 (17.45) 0.032 ± 0.002 (0.81 ± 0.05) 1.50 ± 0.125 (38.1 ± 3.18) A D B E (1) C (Max.) MATERIAL SPECIFICATIONS Element Vacuum-deposited nickel-chrome alloy Core Fire-cleaned high purity ceramic Encapsulation Specially formulated epoxy compound Termination Standard lead material is solder-coated copper. Solderable and weldable per MIL-STD-1276, type C CAGE CODE: 91637 C 5 1 5 2 R 3 6NR 2 F RH5

Page 4

ERC (Military RNC/RNR) www.vishay.com Vishay Dale Revision: 16-Sep-16 3 Document Number: 31025 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Vishay Dale ERC resistors have an operating temperature range of -65 °C to +175 °C. They must be derated according to the following curve: MARKING (per MIL-PRF-55182) Characteristics: K = 100 ppm, H = 50 ppm, J = 25 ppm Tolerance: F = 1 %, D = 0.5 %, B = 0.1 % Value = three significant figures and multiplier J = JAN (Joint Army - Navy) brand RNC/RNR50, 55 (4 lines) RNC/RNR60, 65, 70 (5 lines) D 210H 1003 FSCJ Manufacturer’s code 3 digit date code and characteristic Value Tolerance, failure rate, lead material and JAN 91637 1213J RNC60J 1211FS 1209A CAGE code 4 digit date code and JAN Style and characteristic Value, tolerance, and failure rate Production lot code 0 25 50 75 100 150 175 200 125 AMBIENT TEMPERATURE IN °C DERATING R A T E D P O W E R I N % 0 20 40 60 80 100 120 - 65 - 50 - 25 0 20 40 60 80 100 120 APPLIED POWER IN W H E A T R IS E ( °C A B O V E A M B IE N T ) 0 0.125 0.25 0.375 0.5 0.625 0.75 0.875 1 1.125 THERMAL RESISTANCE ERC50 ERC55, ERC55-200 ERC65, ERC70