Contact Us 0755-83210559 ext. 805




For Reference Only

Part Number ZLDO1117G15TA
Manufacturer Diodes Incorporated
Description IC REG LINEAR 1.5V 1A SOT223
Datasheet ZLDO1117G15TA Datasheet
Package TO-261-4, TO-261AA
In Stock 82,130 piece(s)
Unit Price $ 0.1870 *
Lead Time Can Ship Immediately
Estimated Delivery Time Jan 20 - Jan 25 (Choose Expedited Shipping)
Request for Quotation

Part Number # ZLDO1117G15TA (PMIC - Voltage Regulators - Linear) is manufactured by Diodes Incorporated and distributed by Heisener. Being one of the leading electronics distributors, we carry many kinds of electronic components from some of the world’s top class manufacturers. Their quality is guaranteed by its stringent quality control to meet all required standards.

For ZLDO1117G15TA specifications/configurations, quotation, lead time, payment terms of further enquiries please have no hesitation to contact us. To process your RFQ, please add ZLDO1117G15TA with quantity into BOM. does NOT require any registration to request a quote of ZLDO1117G15TA.

ZLDO1117G15TA Specifications

ManufacturerDiodes Incorporated
CategoryIntegrated Circuits (ICs) - PMIC - Voltage Regulators - Linear
Datasheet ZLDO1117G15TADatasheet
PackageTO-261-4, TO-261AA
Output ConfigurationPositive
Output TypeFixed
Number of Regulators1
Voltage - Input (Max)18V
Voltage - Output (Min/Fixed)1.5V
Voltage - Output (Max)-
Voltage Dropout (Max)1.35V @ 1A
Current - Output1A
Current - Quiescent (Iq)-
Current - Supply (Max)120µA ~ 10mA
PSRR80dB (120Hz)
Control Features-
Protection FeaturesOver Current, Over Temperature
Operating Temperature-40°C ~ 125°C
Mounting TypeSurface Mount
Package / CaseTO-261-4, TO-261AA
Supplier Device PackageSOT-223

ZLDO1117G15TA Datasheet

Page 1

Page 2

ZLDO1117 Document number: DS32018 Rev. 6 - 2 1 of 14 July 2012 © Diodes Incorporated ZLDO1117 A Product Line of Diodes Incorporated 1A LOW DROPOUT POSITIVE REGULATOR 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5.0V AND ADJUSTABLE OUTPUTS Description ZLDO1117 is a low dropout positive adjustable or fixed-mode regulator with 1A output current capability. The ZLDO1117 has a 2% tolerance across the industrial temperature range and is guaranteed to have lower than 1.2V dropout at full load current making it ideal to provide well-regulated outputs of 1.2V to 5.0V with input supply voltages up to 18V. The ZLDO1117 is ideally suited to provide well-regulated supplies for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply across the whole industrial temperature range. Features • 1.2V Maximum Dropout at Full Load Current • 2% Tolerance Over Temperature, Line and Load Variations • Fast Transient Response • Output Current Limiting • Built-in Thermal Shutdown • Good Noise Rejection • Suitable for use with MLCC Capacitors • Qualified to AEC-Q100 Grade 2 (see ‘Ordering Information’) • PPAP capable (Note 4) • -40 to +125°C Junction Temperature Range • Available in TO252 and SOT223 with “Green” Molding Compound (No Br, Sb) Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Pin Assignments SOT223 TO252 1 2 3 Adj (GND) Vout Vin Tab is Vout (Top View) Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. Automotive products are AEC-Q100 qualified and are PPAP capable. Automotive, AEC-Q100 and standard products are electrically and thermally the same, except where specified. Typical Applications Circuit 1A I/O – 1.8V Core Regulator 3.3V 4.7µF MLCC ZLDO1117-18 1.8V 4.7µF MLCC

Page 3

ZLDO1117 Document number: DS32018 Rev. 6 - 2 2 of 14 July 2012 © Diodes Incorporated ZLDO1117 A Product Line of Diodes Incorporated Pin Descriptions Pin Name I/O Pin Number Function Adj (GND) I 1 A resistor divider from this pin to the VOUT pin and ground sets the output voltage (Ground only for Fixed-Mode). VOUT O 2 The output of the regulator. A minimum of 4.7µF capacitor (0.05Ω ≤ ESR ≤ 0.5Ω) must be connected from this pin to ground to insure stability. For improved ac load response a larger output capacitor is recommended. VIN I 3 The input pin of regulator. Typically a large storage capacitor (0.05Ω ≤ ESR ≤ 0.5Ω) is connected from this pin to ground to ensure that the input voltage does not sag below the minimum dropout voltage during the load transient response. This pin must always be 1.3V higher than VOUT in order for the device to regulate properly. Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.) Symbol Parameter Rating Unit VIN Input Supply Voltage (Relative to Ground) -0.03 to +18 V TJ Junction Temperature +150 °C Power Dissipation See SOA Curve TST Storage Temperature -65 to +150 °C Unless otherwise stated voltages specified are relative to the ANODE pin. Safe Operation Area (SOA) Curve ESD Susceptibility Symbol Parameter Rating Unit HBM Human Body Model 4 kV MM Machine Model 400 V Stresses greater than the 'Absolute Maximum Ratings' specified above, may cause permanent damage to the device. These are stress ratings only; functional operation of the device at these or any other conditions exceeding those indicated in this specification is not implied. Device reliability may be affected by exposure to absolute maximum rating conditions for extended periods of time. Semiconductor devices are ESD sensitive and may be damaged by exposure to ESD events. Suitable ESD precautions should be taken when handling and transporting these devices 0 0.2 0.4 0.6 0.8 1 1.2 0 5 10 15 20 25 VIN - VOUT (V) I L O A D ( A ) SOA

Page 4

ZLDO1117 Document number: DS32018 Rev. 6 - 2 3 of 14 July 2012 © Diodes Incorporated ZLDO1117 A Product Line of Diodes Incorporated Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.) Symbol Parameter Min Max Unit VIN Input voltage 2.7 (Note 8) 18 V IO Output current 0.01 1 A TJ Operating Junction Temperature Range (Note 5) -40 +125 °C Package Thermal Data Thermal Resistance Package Rating Unit Junction-to-Ambient, θJA SOT223 (Note 6) TO252 (Note 7) 107 73 °C/W Junction-to-Case, θJC SOT223 (Note 6) TO252 (Note 7) 16 12 °C/W Notes: 5. ZLDO1117 contains an internal thermal limiting circuit that is designed to protect the regulator in the event that the maximum junction temperature exceeded. When activated, typically at 150°C, the regulator Output switches off and then back on as the die cools. 6. Test condition for SOT223: TA = +27°C, no air flow, device mounted on 2”X2” polyimide PCB, 2 oz copper, 5.6mmX5.6mm pad. 7. Test condition for TO252: TA = +27°C, no air flow, device mounted on 2”X2” polyimide PCB, 1 oz copper, 2cmX2cm pad. 8. Ensures correct operation without entering dropout. Device will continue to operate below this minimum input voltage under dropout conditions. Electrical Characteristics (@TA = +25°C, unless otherwise specified.) Parameter Conditions TA Min Typ Max Unit Reference Voltage ZLDO1117-ADJ (VIN-VOUT) = 2V, IO = 10mA 25 1.238 1.250 1.263 V VOUT+1.4V < VIN< 10V, 10mA < IO< 1A FT 1.225 1.275 Output Voltage ZLDO1117-1.2 IO = 10mA, VIN = 3.2V 25 1.188 1.200 1.212 V 10mA< IO< 1A, 2.7V

Page 5

ZLDO1117 Document number: DS32018 Rev. 6 - 2 4 of 14 July 2012 © Diodes Incorporated ZLDO1117 A Product Line of Diodes Incorporated Electrical Characteristics (cont.) (@TA = +25°C, unless otherwise specified.) Parameter Conditions TA Min Typ Max Unit Load Regulation ZLDO1117-ADJ VIN=3.3V,VADJ=0, 10mA

Page 6

ZLDO1117 Document number: DS32018 Rev. 6 - 2 5 of 14 July 2012 © Diodes Incorporated ZLDO1117 A Product Line of Diodes Incorporated Typical Characteristics Output Voltage Variation vs. Temperature Line Regulation vs. Temperature Load Regulation vs. Temperature Drop-Out Voltage vs. Current Drop-Out Voltage vs. Temperature Adjust Pin Input Current -0.5 -0.4 -0.3 -0.2 -0.1 0 0.1 0.2 0.3 0.4 0.5 -40 -25 -10 5 20 35 50 65 80 95 110 125 Temperature (°C) ∆ V o u t (% ) Adjustable version ILOAD = 10mA -0.01 0 0.01 0.02 0.03 0.04 0.05 0.06 -50 -25 0 25 50 75 100 125 Temperature (C) L in e R e gu la tio n (% ) VOUT+1.5V

Page 7

ZLDO1117 Document number: DS32018 Rev. 6 - 2 6 of 14 July 2012 © Diodes Incorporated ZLDO1117 A Product Line of Diodes Incorporated Typical Characteristics Transient Load Regulation with 10µF Tantalum Capacitor Transient Load Regulation with 4.7µF MLCC Capacitor Transient Line Regulation with 4.7µF MLCC Capacitor Ripple Rejection ILOAD = 100mA, VIN - VOUT = 3V 50 55 60 65 70 75 80 85 90 10 100 1,000 10,000 100,000 Frequency (Hz) R ip pl e R ej ec tio n (d B ) 4V 5V 0 10 10µs/div ZLDO1117 2.5V CIN = 1µF, COUT = 4.7µF MLCC ILOAD = 100mA 100mA ZLDO1117-2.5V CIN = 1µF, COUT = 10µFTANT IPRELOAD = 100mA, Istep = 500mA 600mA 0 10mV -10mV 100mA ZLDO1117-2.5V CIN = 1µF, COUT = 4.7µF MLCC IPRELOAD = 100mA, ISTEP = 500mA 600mA 0 10mV -10mV

Page 8

ZLDO1117 Document number: DS32018 Rev. 6 - 2 7 of 14 July 2012 © Diodes Incorporated ZLDO1117 A Product Line of Diodes Incorporated Application Information The ZLDO1117 family of quasi-LDO regulators is easy to use. They are protected against short circuit and thermal overloads. (see block diagram). Thermal protection circuitry will shut down the regulator should the junction temperature exceed +150°C at the sense point. The ZLDO1117 is pin compatible with similar ‘1117 regulators and offers extended temperature range and improved regulation specifications. Operation The ZLDO1117 develops a 1.25V reference voltage between the output and the adjust terminal (see block diagram). By placing a resistor between these two terminals, a constant current is caused to flow through R1 and down through R2. For fixed output variants Resistors R1 and R2 are internal. Stability The ZLDO1117 requires an output capacitor as part of the device frequency compensation. As part of its improved performance over industry standard 1117 the ZLDO1117 is suitable for use with MLCC (Multi Layer Ceramic Chip) capacitors. A minimum of 4.7µF ceramic X7R, 4.7µF tantalum, or 47 µF of aluminum electrolytic is required. The ESR of the output capacitor should be less than 0.5Ω. Surface mount tantalum capacitors, which have very low ESR, are available from several manufacturers. When using MLCC capacitors avoid the use of Y5V dielectrics. Load Regulation For improved load regulation the ZLDO1117-ADJ should have the upper feedback resistor, R1, connected as close as possible to VOUT and the lower resistor, R2, connected as close as possible to the load GND return. This helps reduce any parasitic resistance in series with the load. Thermal Considerations ZLDO1117 series regulators have internal thermal limiting circuitry designed to protect the device during overload conditions. For continuous normal load conditions however, the maximum junction temperature rating of +125°C must not be exceeded. It is important to give careful consideration to all sources of thermal resistance from junction to ambient. For the SOT223-3L and TO252-3L packages, which are designed to be surface mounted, additional heat sources mounted near the device must also be considered. Heat sinking is accomplished using the heat spreading capability of the PCB and its copper traces. The θJC (junction to tab)of the TO252-3L and SOT223-3L are +12°C/W and +16°C/W respectively. Thermal resistances from tab to ambient can be as low as +30°C/W. The total thermal resistance from junction to ambient can be as low as +42 to +46°C/W. This requires a reasonable sized PCB with at least one layer of copper to spread the heat across the board and couple it into the surrounding air. Datasheet specifications using 2 oz copper and a 5mmx5mm pad with TA = +27°C, no air flow yielded θJA (junction to tab) of +73°C/W and +107°C/W for TO252-3L and SOT223-3L respectively. The thermal resistance for each application will be affected by thermal interactions with other components on the board. Some experimentation will be necessary to determine the actual value. Ripple Rejection When using the ZLDO1117 adjustable device the adjust terminal can be bypassed to improve ripple rejection. When the adjust terminal is bypassed the required value of the output capacitor increases. The device will require an output capacitor of 22µF tantalum or 150µF aluminum electrolytic when the adjust pin is bypassed. Normally, capacitor values on the order of 100µF are used in the output of many regulators to ensure good load transient response with large load current changes. Output capacitance can be increased without limit and larger values of output capacitance further improve stability and transient response. The curves for Ripple Rejection were generated using an adjustable device with the adjust pin bypassed. These curves will hold true for all values of output voltage. For proper bypassing, and ripple rejection approaching the values shown, the impedance of the adjust pin capacitor, at the ripple frequency, should be < R1. R1 is normally in the range of 100Ω to 200Ω. The size of the required adjust pin capacitor is a function of the input ripple frequency. At 120Hz, with R1 = 100Ω, the adjust pin capacitor should be >13µF. At 10kHz only 0.16µF is needed. For fixed voltage devices, and adjustable devices without an adjust pin capacitor, the output ripple will increase as the ratio of the output voltage to the reference voltage (VOUT/VREF). For example, with the output voltage equal to 5V, the output ripple will be increased by the ratio of 5V/1.25V. It will increase by a factor of four. Ripple rejection will be degraded by 12dB from the value shown on the curve.

Page 9

ZLDO1117 Document number: DS32018 Rev. 6 - 2 8 of 14 July 2012 © Diodes Incorporated ZLDO1117 A Product Line of Diodes Incorporated Typical Application Circuits Figure 1 Basic Adjustable Regulator with 5V Output Using ⎩ ⎨ ⎧ ⎭ ⎬ ⎫+•= 1R 2R 125.1VOUT then the output voltage becomes: V0.5 110 330 125.1VOUT = ⎩ ⎨ ⎧ ⎭ ⎬ ⎫+•= Figure 2 Adjustable Regulator with IADJ Errors 2RI 1R 2R 125.1V ADJOUT •+ ⎩ ⎨ ⎧ ⎭ ⎬ ⎫+•= Because IADJ typically is 55μA, its effect is negligible in most applications. V02.53301055 110 330 125.1V 6OUT = ⎩ ⎨ ⎧ ⎭ ⎬ ⎫••++•= − ~ 0.4% A. Output capacitor selection is critical for regulator stability. Larger Cout values benefit the regulator by improving transient response and loop stability. B. CADJ can be used to improve ripple rejection. If CADJ is used, a Cout that is larger in value than CADJ must be used. C. Cin is recommended if ZLDO1117 is not located near the power supply filter. D. An external diode is recommended to protect the regulator if the input instantaneously is shorted to GND. E. This device is designed to be stable with tantalum and MLCC capacitors with an ESR less than 0.47Ω.

Page 10

ZLDO1117 Document number: DS32018 Rev. 6 - 2 9 of 14 July 2012 © Diodes Incorporated ZLDO1117 A Product Line of Diodes Incorporated Other Application Circuits Figure 3 ZLDO1117 with Extended Output Voltage C2 100 F10 F ZLDO1117 IN OUT ADJ C1 R2 R1 121Ω 365Ω VIN TTL R4R3 1k 1k 1% 1% T1 MMBT3904 VOUT Figure 4 ZLDO1117 with Disable Function ZLDO1117x50 IN OUT ADJ 10 F C1 C2 100 F VOUT = -5V AC IN Figure 5 ZLDO1117 as a Negative LDO

ZLDO1117G15TA Reviews

Average User Rating
5 / 5 (162)
★ ★ ★ ★ ★
5 ★
4 ★
3 ★
2 ★
1 ★

Write a Review

Not Rated
Thanks for Your Review!

Gabr*****e Lu

December 22, 2020

fast delivery and good product, very happy

ZLDO1117G15TA Guarantees

Service Guarantee

Service Guarantees

We guarantee 100% customer satisfaction.

Our experienced sales team and tech support team back our services to satisfy all our customers.

Quality Guarantee

Quality Guarantees

We provide 90 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.

ZLDO1117G15TA Packaging

Verify Products
Customized Labels
Professional Packaging

ZLDO1117G15TA Related Products

600F5R6BT250XT 600F5R6BT250XT American Technical Ceramics, CAP CER 5.6PF 250V C0G/NP0 0805, 0805 (2012 Metric), - View
MB9BF167MPMC1-G-JNE2 MB9BF167MPMC1-G-JNE2 Cypress Semiconductor Corp, IC MCU 32BIT 800KB FLASH 80LQFP, 80-LQFP, - View
XPERDO-L1-R250-00603 XPERDO-L1-R250-00603 Cree Inc., LED RED-ORN 700MA 3.45X3.45 SMD, 1414 (3535 Metric), - View
AM27SECK09 AM27SECK09 Kingbright, LED ORANGE CLEAR 2SMD, 2-SMD, Z-Bend, - View
BZY91C10N BZY91C10N Littelfuse Inc., TVS DIODE 6.8VWM DO5, DO-203AB, DO-5, Stud, - View
RT0402FRE072K8L RT0402FRE072K8L Yageo, RES SMD 2.8K OHM 1% 1/16W 0402, 0402 (1005 Metric), - View
RJR24FX105P RJR24FX105P Bourns Inc., TRIMMER 1M OHM 0.5W PC PIN, -, - View
RLB0812-561KL RLB0812-561KL Bourns Inc., FIXED IND 560UH 150MA 2.5 OHM TH, Radial, - View
MS27467T23B35H MS27467T23B35H TE Connectivity Deutsch Connectors, CONN PLUG 100POS STRGHT W/PINS, -, - View
AIT6LA32-25PS AIT6LA32-25PS Amphenol Industrial Operations, ER 25C 25#12 PIN PLUG, -, - View
GTC06F28-15P-B30 GTC06F28-15P-B30 Amphenol Industrial Operations, GT 35C 35#16 PIN PLUG, -, - View
ACS06E18-11P-003 ACS06E18-11P-003 Amphenol Industrial Operations, AC 5C 5#12 PIN PLUG, -, - View
Payment Methods
Delivery Services

Quick Inquiry


Certified Quality

Heisener's commitment to quality has shaped our processes for sourcing, testing, shipping, and every step in between. This foundation underlies each component we sell.

ISO9001:2015, ICAS, IAF, UKAS

View the Certificates

Do you have any question about ZLDO1117G15TA?

0755-83210559 ext. 805 heisener007 3008774228 Send Message

Featured Products












CAP TANT 100UF 16V 10% 2413






SIDAC 120-138V 1A TO92


CAP TANT 10UF 16V 10% 1206

View More >>

ZLDO1117G15TA Tags

  • ZLDO1117G15TA
  • ZLDO1117G15TA PDF
  • ZLDO1117G15TA datasheet
  • ZLDO1117G15TA specification
  • ZLDO1117G15TA image
  • Diodes Incorporated
  • Diodes Incorporated ZLDO1117G15TA
  • buy ZLDO1117G15TA
  • ZLDO1117G15TA price
  • ZLDO1117G15TA distributor
  • ZLDO1117G15TA supplier
  • ZLDO1117G15TA wholesales

ZLDO1117G15TA is Available in