Molex has launched the Brad Micro-Push M12 connector for factory automation and industrial lighting applications. Featuring an innovative push-on mating interface, the connectors reduce installation time up to 80% compared to screw-style connectors and facilitate simple blind-mate connections in tight locations.
Littelfuse has introduced four new solutions for general-purpose ESD protection TVS Diode Arrays (SPA Diode) that occupy less board space than similar industry offerings. The SP1013 and SP1014 TVS Diode Arrays fit into a standard 0201 footprint but offer a 30 percent reduction in the board space required over other 0201 outline solutions, allowing more clearance between components.
Gallium nitride high electron mobility transistor (HEMT) monolithic microwave integrated circuits (MMICs) from Cree target X-band and C-band high-frequency applications. The transistors feature a wide bandgap material used for high-power high-performance semiconductors with electrical characteristics superior to conventional silicon devices, useful in many applications including power conversion systems.
The next generation of its CAPZero line of innovative, two-terminal, X capacitor discharge ICs has been introduced by Power Integrations. CAPZero-2 ICs increase design flexibility by covering a wide range of applications and output power.
Recom has introduced two new DIN-Rail power supply families, the REDIN45 and REDIN60 with 45W and 60W power respectively. Special attention was given during the development of the units to make them as durable and reliable as possible by using high quality components and generous design margins to ensure a long, trouble-free life.
Fox Electronics has developed its most compact watch crystal, measuring just 1.6mm x 1.1mm x 0.5mm (L x W x H). Although smaller in size, the new FX161 crystal operates at many of the same high standards as previous models, making it one of the most efficient tuning forks yet.
Micrel MIC28303 50V / 3A power modules are aimed at applications such as industrial, medical, telecom, and automotive distributed power systems. The units combine in a single package a DC-DC controller, power MOSFETs, bootstrap diode, bootstrap capacitor and an inductor. The MIC28303 feature a unique adaptive ON-time control architecture and a supply range from 4.5V to 50V.
The Texas Instruments (TI) ADC34J2 series offers high-linearity, ultra-low power, dual-channel, 12-bit, 50-MSPS to 160-MSPS, analog-to-digital converters (ADCs). The devices are designed specifically to support demanding, high input frequency signals with large dynamic range requirements.
Advanced Thermal Solutions clipKIT heat sink attachment system can be used with most industry standard, off the shelf straight fin, pin fin, cross cut or slant fin heat sinks. It improves on heat sink performance in thermal transfer, and vibration and shock resistance, says the company.
C&K Components’ JCH sealed detect switch is IP64-sealed in a 4.7mm x 4.2mm package. The micro-miniature JCH is the first SMT detect switch in this package size with an IP64 rating for protection against dust, dirt, water, and other contaminants.
The STMicroelectronics M95M02-A125 Automotive EEPROM is compliant with the high level of reliability defined by the Automotive standard AEC-Q100 grade 0. The M95M02-A125 is accessed by a simple serial SPI compatible interface running up to 10MHz. The memory array is based on advanced true EEPROM technology, says the company.
Latest from Intersil is the first 60V synchronous buck controller able to bypass the intermediate step-down conversion stage traditionally employed in industrial applications. The ISL8117 synchronous step-down PWM controller’s low duty cycle (40ns minimum on time) enables the direct step-down conversion from 48V to a 1V point-of-load.
NXP Semiconductor TrEOS ESD protection devices support SuperSpeed USB up to 10Gbps. TrEOS ESD devices protect against 20kV contact discharges and exceeds IEC 61000-4-2, level 4. TrEOS also delivers surge protection against a pulse up to 9A. Applications include: ultra-high-speed data lines such as USB 3.1 and HDMI 2.0, interface lines for sensitive IOs, and general ESD protection.
Infineon’s BTN8962TA integrated high-current half-bridge for motor-drive applications is part of the NovalithIC family, combining one p-channel high-side MOSFET and one n-channel low-side MOSFET with an integrated driver IC in one package.
A new approach to audio-function integration to ease compliance with European Ecodesign legislation while enabling high-performance end products - Texas Instruments’ (TI) has introduced the PCM186x family of audio front-end devices. With no need for a 5V supply or an external programmable-gain amplifier, smaller, smarter products are now feasible at reduced cost.
Fairchild Semiconductor’s FL7734 primary-side regulation PWM controller is designed to minimize components for low-power LED lighting solutions.
Vishay ultra-fast AU1PMHM3/84A series recovery rectifiers have fast reverse recovery times as low as 15ns and voltage levels as high as 1500V. Typical applications include very high-frequency switched mode power supplies (SMPS), inverters and freewheeling diodes.
Available in 3W to 15W versions, Recom’s REC series compact power supplies are offered in a variety of Industry-standard package types (DIP24, SMD, and 2″ x 1″) and are EN, UL and/or CB certified. They feature wide input ranges (2:1 and 4:1) and efficiencies up to 87%. These features make them versatile solutions for a variety of applications in the industrial controls, telecommunication, and medical arenas.
