ON Semiconductor offers a new family of four devices that promote the high levels of performance and innovative functionality that vehicle manufacturers and consumers now demand from automotive exterior and interior lighting.
TDK Corporation has released the new B43707* and B43727* series of EPCOS aluminium electrolytic capacitors with screw terminals. They are created for rated voltages of between 400VDC and 450VDC and comprise a capacitance range from 1800µF to 18000µF.
Diodes Incorporated AL17150-10B High-Voltage Step-Down Switcher is a universal high voltage input step-down regulator that gives an accurate CV.
Maxim MAX25410 USB PD Port Protector, available now from Mouser, is an automotive USB-PD-based Type-C protection solution for automotive radio, navigation, connectivity, and USB hub/multimedia module applications.
ROHM now offers a highly integrated and efficient PMIC, BD71850MWV, optimised for NXP Semiconductors’ i.MX 8M Nano family of application processors, which provides exceptional computing, and audio performance.
Diodes Incorporated now offers the AP43771 USB Type-C PD controller, providing an embedded microcontroller with one-time programmable memory.
Nexperia has released its lowest-ever RDS(on) power MOSFET. The PSMNR51-25YLH sets a new standard of 0.57mOhm at 25V. Employing the company's NextPowerS3 technology, this excellent performance is provided without compromising other important parameters such as maximum drain current (ID(max)), SOA or gate charge QG.
Murata now offers a new LoRa-based module that, at just 10mm x 8mm x 1.6mm, is claimed to be the smallest available in the world. Ideal for a broad range of high-volume applications where small size, extended battery life, long-range, security and a competitive price point are necessities.
The Analog Devices AD74413R Quad-Channel Software Configurable Input/Output is a solution for building and process control applications.
KEMET Corporation has launched the R41T, and R76H series AEC-Q200 qualified metallised polypropylene film capacitors. This series grows on the company’s expertise in power management solutions by using advances in manufacturing technology and new materials to meet the stringent demands of the latest automotive applications, including those for EV powertrains and ADAS.
The Analog Devices ADRF5545A RF front end module from is a dual-channel integrated RF receiver front-end module designed for time-division duplexing and massive multiple-input and multiple-output (mMIMO) applications that operate in the 2.4GHz-4.2GHz frequency range.
ROHM now offers the 200V ultra-low IR Schottky Barrier Diodes optimised for automotive applications incorporating powertrains and xEVs.
A Single-Arm Composite Backshell developed by Souriau-Sunbank is specifically designed to offer robust and unique performance in terms of reliability and functionality for aerospace defence and other harsh environment applications.
AVX Corporation has released a new series of high-temperature, glass-encapsulated MLVs that are qualified to AEC-Q200, rated for operating temperatures up to 150C, and created for application in a wide variety of high-energy, harsh-environment, automotive underhood, industrial, and oil and gas applications.
Analog Devices LTC7841 PolyPhase Synchronous Boost Controllers drive two N-channel power MOSFET stages out-of-phase. Multiphase operation decreases input and output capacitor demands and allows the usage of smaller inductors than the single-phase equivalent.
The Panasonic DJ-H series is a latching relay to satisfy the demands of the IoT and building automation market for switching actuators like lighting and motor loads.
IDT ZSSC3230 Capacitive Sensor Signal Conditioner ICs is a CMOS integrated circuit for accurate capacitance-to-digital conversion and sensor-specific correction of capacitive sensor signals.
Analog Devices AD242xW Automotive Audio Bus (A2B) Transceivers provide the unprecedented ability to tailor system-level performance to even the most stringent EMC demands.