Contact Us
SalesDept@heisener.com 0755-83210559 ext. 805

SFR16S0009103JR500

SFR16S0009103JR500

SFR16S0009103JR500

For Reference Only

Part Number SFR16S0009103JR500
Manufacturer Vishay BC Components
Description RES 910K OHM 1/2W 5% AXIAL
Datasheet SFR16S0009103JR500 Datasheet
Package Axial
In Stock 177 piece(s)
Unit Price $ 0.0160 *
Lead Time To be Confirmed
Estimated Delivery Time Dec 6 - Dec 11 (Choose Expedited Shipping)
Request for Quotation

Part Number # SFR16S0009103JR500 (Through Hole Resistors) is manufactured by Vishay BC Components and distributed by Heisener. Being one of the leading electronics distributors, we carry many kinds of electronic components from some of the world’s top class manufacturers. Their quality is guaranteed by its stringent quality control to meet all required standards.

For SFR16S0009103JR500 specifications/configurations, quotation, lead time, payment terms of further enquiries please have no hesitation to contact us. To process your RFQ, please add SFR16S0009103JR500 with quantity into BOM. Heisener.com does NOT require any registration to request a quote of SFR16S0009103JR500.

SFR16S0009103JR500 Specifications

ManufacturerVishay BC Components
CategoryResistors - Through Hole Resistors
Datasheet SFR16S0009103JR500Datasheet
PackageAxial
SeriesSFR16S
Resistance910 kOhms
Tolerance±5%
Power (Watts)0.5W, 1/2W
CompositionMetal Film
Features-
Temperature Coefficient±250ppm/°C
Operating Temperature-55°C ~ 155°C
Package / CaseAxial
Supplier Device Package-
Size / Dimension0.075" Dia x 0.138" L (1.90mm x 3.50mm)
Height - Seated (Max)-
Number of Terminations2
Failure Rate-

SFR16S0009103JR500 Datasheet

Page 1

Page 2

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents Revision: 12-Aug-16 1 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Standard Metal Film Leaded Resistors A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting leads of electrolytic copper are welded to the end-caps. The resistors are coated with a colored lacquer (light-blue for type SFR16S; light-green for type SFR25 and red-brown for type SFR25H) which provides electrical, mechanical, and climatic protection. The encapsulation is resistant to all cleaning solvents in accordance with IEC 60068-2-45. FEATURES • Small size (SFR16S: 0204, SFR25 / SFR25H: 0207) • Low noise (max. 1.5 μV/V for R > 1 M) • Compatible to both lead (Pb)-free and lead containing soldering processes • Material categorization:  for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • General purpose resistors Note • R value is measured with probe distance of 24 mm ± 1 mm using 4-terminal method. TECHNICAL SPECIFICATIONS DESCRIPTION SFR16S SFR25 SFR25H DIN size 0204 0207 0207 Resistance range 1 to 3 M; jumper (0  0.22 to 10 M; jumper (0  0.22 to 10 M Resistance tolerance ± 5 %; ± 1 % Temperature coefficient ± 250 ppm/K; ± 100 ppm/K Rated dissipation, P70 0.5 W 0.4 W 0.5 W Thermal resistance 170 K/W 200 K/W 150 K/W Operating voltage, Umax. AC/DC 200 V 250 V 350 V Operating temperature range -55 °C to 155 °C Permissible film temperature 155 °C Max. resistance change at rated dissipation |R/R max.|, after 1000 h ± (2 % R + 0.05 )

Page 3

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents Revision: 12-Aug-16 2 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Note (1) Jumper is only available for SFR25. Notes • The products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER. (1) N4 packaging indicates SFR25 and SFR25H radial version. TEMPERATURE COEFFICIENT AND RESISTANCE RANGE TYPE TOLERANCE TCR RESISTANCE E-SERIES SFR16S ± 5 % ± 250 ppm/K 1 to  4.7  E24± 100 ppm/K 4.7 to 100 k ± 250 ppm/K > 100 k to 3 M ± 1 % ± 100 ppm/K 5.6  to 100 k E24; E96 ± 250 ppm/K > 100 k to 976 k Jumper (0  -  30 m; Imax. = 3 A - SFR25, SFR25H ± 5 % ± 250 ppm/K 0.22 to 4.7  E24± 100 ppm/K > 4.7 to 1 M ± 250 ppm/K > 1 M to 10 M ± 1 % ± 250 ppm/K 1  to 4.7  E24; E96± 100 ppm/K > 4.7 to 1 M ± 250 ppm/K > 1 M to 10 M Jumper (0 ) (1) -  30 m; Imax. = 5 A - PART NUMBER AND PRODUCT DESCRIPTION PART NUMBER: SFR2500001001FA500 TYPE VARIANT TCR/MATERIAL RESISTANCE TOLERANCE PACKAGING SPECIAL SFR16S0 SFR2500 SFR25H0 0 = neutral Z = value overflow (special) 0 = standard Z = jumper 3 digit value 1 digit multiplier MULTIPLIER F = ± 1 % J = ± 5 % Z = jumper N4 A5 A1 R5 The 2 digits are used for all special parts. 00 = standard 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 5 = *105 Z = 0000 PRODUCT DESCRIPTION: SFR25 1 % A5 1K0 SFR25 1 % A5 1K0 TYPE TOLERANCE PACKAGING (1) RESISTANCE VALUE SFR16S SFR25 SFR25H ± 1 % ± 5 % N4 A5 A1 R5 47K = 47 k 51R1 = 51.1  2 5RFS 0 0 0 0 1 0 0 1 F A 5 0 0

Page 4

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents Revision: 12-Aug-16 3 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) A1 packaging only available for resistors with ± 5 % tolerance. (2) N4 packaging only available for SFR25 and SFR25H radial version. MARKING The nominal resistance and tolerance are marked on the resistor using four or five colored bands in accordance with IEC 60062, marking codes for resistors and capacitors. PACKAGING TYPE CODE QUANTITY PACKAGING STYLE WIDTH PITCH DIMENSIONS SFR16S A5 5000 Taped acc. to IEC 60286-1 fan-folded in a box 52 mm 5 mm 75 mm x 73 mm x 270 mm R5 5000 Taped acc. to IEC 60286-1 on a reel 92 mm x 278 mm x 278 mm A1 (1) 1000 Taped acc. to IEC 60286-1 fan-folded in a box 75 mm x 28 mm x 262 mm SFR25, SFR25H A5 5000 Taped acc. to IEC 60286-1 fan-folded in a box 52 mm 5 mm 75 mm x 98 mm x 270 mm R5 5000 Taped acc. to IEC 60286-1 on a reel 93 mm x 300 mm x 298 mm A1 (1) 1000 Taped acc. to IEC 60286-1 fan-folded in a box 75 mm x 28 mm x 262 mm N4 (2) 4000 Taped acc. to IEC 60286-2 fan-folded in a box - 12.7 mm 45 mm x 262 mm x 330 mm

Page 5

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents Revision: 12-Aug-16 4 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FUNCTIONAL PERFORMANCE Maximum dissipation (Pmax.) in percentage of rated power as a function of the ambient temperature (Tamb) SFR16S Hot-spot temperature rise (T) as a function of dissipated power SFR25/SFR25H Hot-spot temperature rise (T) as a function of dissipated power Note • The maximum permissible hot-spot temperature is 155 °C. -55 Ambient Temperature in °C P o w e r in % 0 50 70 100 125 155 180 Derating 20 0 40 60 80 100 0 0.2 0.4 0.6 30 (W) (K) Δ P T 90 70 50 10 0 0.5 100 20 40 60 80 0.1 0.2 0.3 0.4 (W) Δ (K) SFR25 SFR25H P T

Page 6

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents Revision: 12-Aug-16 5 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFR16S Pulse on a regular basis; maximum permissible peak pulse power ( max.) as a function of pulse duration (ti) SFR16S Pulse on a regular basis; maximum permissible peak pulse voltage ( max.) as a function of pulse duration (ti) SFR25 Pulse on a regular basis; maximum permissible peak pulse power ( max.) as a function of pulse duration (ti) 10-5 10-4 10-3 10-2 10-1 1 103 1 10 102 max. (W) i(s)10 -6 10-1 200 100 50 20 10 5 2 / = 1000itpt P t 500 P 600 0 10-6 10-5 10-4 10-3 10-2 10-1 1 500 400 300 200 100 max. (V) i (s) U t U 10-5 10-4 10-3 10-2 10-1 1 103 1 10 102 max. (W) 10-6 10-1 2 5 10 20 50 100 200 500 / = 1000 i(s)t P itpt P

Page 7

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents Revision: 12-Aug-16 6 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SFR25 Pulse on a regular basis; maximum permissible peak pulse voltage ( max.) as a function of pulse duration (ti) SFR25H Pulse on a regular basis; maximum permissible peak pulse power ( max.) as a function of pulse duration (ti) SFR25H Pulse on a regular basis; maximum permissible peak pulse voltage ( max.) as a function of pulse duration (ti) 600 0 10-6 10-5 10-4 10-3 10-2 10-1 1 500 400 300 200 100 max. (V) U i (s)t U 10-5 10-4 10-3 10-2 10-1 1 103 1 10 102 10-6 10-1 2 5 10 20 50 100 200 500 i (s)t max. (W) / = 1000 P itpt P h 1200 0 10-6 10-5 10-4 10-3 10-2 10-1 1 800 400 max. (V) U i (s)t U

Page 8

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents Revision: 12-Aug-16 7 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TESTS PROCEDURES AND REQUIREMENTS All tests are carried out in accordance with the following specifications: • EN 60115-1, generic specification (includes tests) The test and requirements table contains only the most important tests. For the full test schedule refer to the documents listed above. The tests are carried out in accordance with IEC 60068-2-xx test method and under standard atmospheric conditions in accordance with IEC 60068-1, 5.3.   Unless otherwise specified the following values apply: • Temperature: 15 °C to 35 °C • Relative humidity: 45 % to 75 % • Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar). For performing some of the tests, the components are mounted on a test board in accordance with IEC 60115-1, 4.31. In test procedures and requirements table, only the tests and requirements are listed with reference to the relevant clauses of IEC 60115-1 and IEC 60068-2-xx test methods. A short description of the test procedure is also given. TEST PROCEDURES AND REQUIREMENTS IEC 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (Rmax.) 4.5 - Resistance - ± 5 %; ± 1 % 4.8 - Temperature coefficient At (20 / -55 / 20) °C and (20 / 155 / 20) °C ± 250 ppm/K; ± 100 ppm/K 4.12 - Noise IEC 60195 < 68 k 68 k to 100 k > 100 k to 1 M > 1 M SFR16S ≤ 0.1 μV/V ≤ 0.5 μV/V ≤ 1.5 μV/V ≤ 1.5 μV/V SFR25, SFR25H ≤ 0.1 μV/V ≤ 0.1 μV/V ≤ 0.1 μV/V ≤ 1.5 μV/V 4.13 - Short time overload Room temperature; P = 6.25 x Pn; (voltage not more than 2 x limiting voltage); 5 s ± (0.25 % R + 0.05 ) 4.16 21 (Ua1) 21 (Ub) 21 (Uc) Robustness of terminations Tensile, bending, and torsion ± (0.25 % R + 0.05 ) 4.17 20 (Ta) Solderability at +235 °C; 2 s; solder bath method; SnPb40 Good tinning (≥ 95 % covered); no damage at +245 °C; 3 s; solder bath method; SnAg3Cu0.5 4.18 20 (Tb) Resistance to soldering heat Unmounted components (260 ± 5) °C; (10 ± 1) s ± (0.25 % R + 0.05 ) 4.19 14 (Na) Rapid change of temperature 30 min at -55 °C and 30 min at +155 °C; 5 cycles ± (0.25 % R + 0.05 ) 4.20 29 (Eb) Bump 3 x 1500 bumps in 3 directions; 40 g ± (0.25 % R + 0.05 ); no damage 4.22 6 (Fc) Vibration 10 sweep cycles per direction; 10 Hz to 2000 Hz 1.5 mm or 200 m/s2 ± (0.25 % R + 0.05 ); no damage 4.23 Climatic sequence: 4.23.2 2 (Ba) Dry heat 155 °C; 16 h 4.23.3 30 (Db) Damp heat, cyclic 55 °C; 24 h; 90 % to 100 % RH; 1 cycle 4.23.4 1 (Aa) Cold -55 °C; 2 h 4.23.5 13 (M) Low air pressure 8.5 kPa; 2 h; 15 °C to 35 °C 4.23.6 30 (Db) Damp heat, cyclic 55 °C; 5 days; 95 % to 100 % RH; 5 cycles SFR16S, SFR25, SFR25H ± (1 % R + 0.05 ); no visible damage ± (1 % R + 0.05 ); no visible damage ± 2 % R; no visible damage4.23.7 DC load apply rated power for 1 min

Page 9

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents Revision: 12-Aug-16 8 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS SFR25, SFR25H WITH RADIAL TAPING Note • Please refer to document “Packaging” for more detail (www.vishay.com/doc?28721). 4.24 78 (Cab) Damp heat (steady state) (40 ± 2) °C; 56 days; (93 ± 3) % RH ± (2 % R + 0.05) 4.25.1 Endurance (at 70 °C) U = or U = Umax.; 1.5 h on; 0.5 h off 70 °C; 1000 h ± (2 % R + 0.05 ) DIMENSIONS - Leaded resistor types, mass and relevant physical dimensions TYPE Ø Dmax. (mm) L1 max. (mm) L2 max. (mm) Ø d (mm) MASS (mg) SFR16S 1.9 3.5 4.1 0.45 ±0.05 102 SFR25 2.5 6.5 7.5 0.58 ±0.05 205 SFR25H 2.5 6.5 7.5 0.58 ±0.05 205 TEST PROCEDURES AND REQUIREMENTS IEC 60115-1 CLAUSE IEC 60068-2 TEST METHOD TEST PROCEDURE REQUIREMENTS PERMISSIBLE CHANGE (Rmax.) P70 x R Ø D L1 Ø d OutlineL2 PP2 W W0 D0P1P0 L1 L F H0 H1 H α = 30° to 40° αα aa DIMENSIONS in millimeters Pitch of components P 12.7 ± 1.0 Feed-hole pitch P0 12.7 ± 0.2 Feed-hole center to lead at topside at the tape P1 3.85 ± 0.5 Feed-hole center to body center P2 6.35 ± 1.0 Lead-to-lead distance F 4.8 + 0.7 / - 0 Tape width W 18.0 ± 0.5 Minimum hold down tape width W0 5.5 Maximum component height H1 29 Lead wire clinch height H0 16.5 ± 0.5 Height of component from tape center H 19.5 ± 1 Feed-hole diameter D0 4.0 ± 0.2 Maximum length of snipped lead L 11.0 Minimum lead wire (tape portion) shortest lead L1 2.5

Page 10

SFR16S, SFR25, SFR25H www.vishay.com Vishay BCcomponents Revision: 12-Aug-16 9 Document Number: 28722 For technical questions, contact: filmresistorsleaded@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HISTORICAL 12NC INFORMATION • The resistors had a 12-digit numeric code starting with 23. • The subsequent 6 digits for 1 % or 7 digits for 5 % indicated the resistor type and packaging. • The remaining digits indicated the resistance value: - The first 3 digits for 1 % or 2 digits for 5 % indicated the resistance value. - The last digit indicated the resistance decade. Resistance Decade for ± 5 % Tolerance Resistance Decade for ± 1 % Tolerance 12NC Example The 12NC of a SFR25 resistor, value 5600  ± 5 %, taped on a bandolier of 5000 units in ammopack was: 2322 181 43562. RESISTANCE DECADE LAST DIGIT 0.10  to 0.91  7 1  to 9.1  8 10  o 91  9 100  to 910  1 1 k to 9.1 k 2 10 k to 91 k 3 100 k to 910 k 4 1 M to 9.1 M 5 = 10 M 6 RESISTANCE DECADE LAST DIGIT 1  to 9.76  8 10  to 97.6  9 100  to 976  1 1 k to 9.76 k 2 10 k to 97.6 k 3 100 k to 976 k 4 1 M to 9.76 M 5 = 10 M 6 HISTORICAL 12NC - Resistor type and packaging TYPE TOL. 23.. ... ..... BANDOLIER IN AMMOPACK BANDOLIER ON REEL RADIAL TAPED STRAIGHT LEADS STRAIGHT LEADS 4000 UNITS 1000 UNITS 5000 UNITS 5000 UNITS SFR16S ± 5 % - ..22 187 73... ..22 187 53... ..06 187 23... ± 1 % - - ..06 187 3... ..06 187 1.... Jumper - - ..06 187 90013 ..22 187 90346 SFR25 ± 5 % ..06 184 03... ..22 181 53... ..22 181 43... ..22 181 63... ± 1 % - - ..22 188 2... ..06 181 8.... Jumper - ..22 181 90018 ..22 181 90019 ..06 181 90011 SFR25H ± 5 % ..06 186 03... ..22 186 16... ..22 186 76... ..06 186 63... ± 1 % - - ..22 186 3.... ..06 186 8....

SFR16S0009103JR500 Reviews

Currently No Review!

SFR16S0009103JR500 Guarantees

Service Guarantee

Service Guarantees

We guarantee 100% customer satisfaction.

Our experienced sales team and tech support team back our services to satisfy all our customers.

Quality Guarantee

Quality Guarantees

We provide 90 days warranty.

If the items you received were not in perfect quality, we would be responsible for your refund or replacement, but the items must be returned in their original condition.

SFR16S0009103JR500 Packaging

Verify Products
Customized Labels
Professional Packaging
Sealing
Packing
Insepction

SFR16S0009103JR500 Related Products

520M15DT20M0000 520M15DT20M0000 CTS-Frequency Controls, OSC TCXO 20.000MHZ CLP SNWV SMD, 4-SMD, No Lead, SFR16S View
KP1830222635 KP1830222635 Vishay BC Components, CAP FILM 2200PF 10% 630VDC RAD, Radial, SFR16S View
1206J0630123JXT 1206J0630123JXT Knowles Syfer, CAP CER 1206, 1206 (3216 Metric), SFR16S View
VJ0402D1R0CLAAP VJ0402D1R0CLAAP Vishay Vitramon, CAP CER 1PF 50V C0G/NP0 0402, 0402 (1005 Metric), SFR16S View
F10-1200-C2-B F10-1200-C2-B Triad Magnetics, XFRMR LAMINATED 12VA THRU HOLE, -, SFR16S View
S-816A45AMC-BAUT2U S-816A45AMC-BAUT2U SII Semiconductor Corporation, IC REG LINEAR 1A SOT23-5, SC-74A, SOT-753, SFR16S View
PM1210-1R0J PM1210-1R0J Bourns Inc., FIXED IND 1UH 400MA 700 MOHM SMD, 1210 (3225 Metric), SFR16S View
HDWM-09-58-S-D-250-SM HDWM-09-58-S-D-250-SM Samtec Inc., .050" BOARD SPACERS, -, SFR16S View
VE-26P-CY-B1 VE-26P-CY-B1 Vicor Corporation, CONVERTER MOD DC/DC 13.8V 50W, Full Brick, SFR16S View
VE-252-EV-S VE-252-EV-S Vicor Corporation, CONVERTER MOD DC/DC 15V 150W, Full Brick, SFR16S View
REC3-4805SRW/H4/A/M/CTRL/X2 REC3-4805SRW/H4/A/M/CTRL/X2 Recom Power, DC/DC CONVERTER 5V 3W, 24-DIP Module, 8 Leads, SFR16S View
RGZ-2424D RGZ-2424D Recom Power, CONV DC/DC 2W 24VIN +/-24VOUT, 14-DIP Module, 6 Leads, SFR16S View
Payment Methods
Delivery Services

Quick Inquiry

SFR16S0009103JR500

Certified Quality

Heisener's commitment to quality has shaped our processes for sourcing, testing, shipping, and every step in between. This foundation underlies each component we sell.

ISO9001:2015, ICAS, IAF, UKAS

View the Certificates

Do you have any question about SFR16S0009103JR500?

0755-83210559 ext. 805 SalesDept@heisener.com heisener007 3008774228 Send Message

Featured Products

LTST-S326KGJRKT

LED GREEN/RED CLEAR 2SMD R/A

ESD9X5.0ST5G

TVS DIODE 5VWM 12.3VC SOD923

XC7A200T-2FBG484I

IC FPGA ARTIX7 285 I/O 484FCBGA

LTST-C190KFKT

LED ORANGE CLEAR 0603 SMD

MIC2025-1YM

IC SW DISTRIBUTION 1CHAN 8SOIC

WSL20108L000FEA

RES SMD 0.008 OHM 1% 1/2W 2010

HDT0001

SWITCH DETECTOR SPST-NO 1MA 5V

CAT24C256WI-GT3

IC EEPROM 256KBIT 400KHZ 8SOIC

SS36FA

DIODE SCHOTTKY 60V 3A SOD123FA

0251001.NRT1L

FUSE BRD MNT 1A 125VAC/VDC AXIAL

View More >>

SFR16S0009103JR500 Tags

  • SFR16S0009103JR500
  • SFR16S0009103JR500 PDF
  • SFR16S0009103JR500 datasheet
  • SFR16S0009103JR500 specification
  • SFR16S0009103JR500 image
  • Vishay BC Components
  • Vishay BC Components SFR16S0009103JR500
  • buy SFR16S0009103JR500
  • SFR16S0009103JR500 price
  • SFR16S0009103JR500 distributor
  • SFR16S0009103JR500 supplier
  • SFR16S0009103JR500 wholesales

SFR16S0009103JR500 is Available in