Texas Instruments ISOUSB111DWXEVM Evaluation Module (EVM) is used to evaluate a high-performance 5000VRMS reinforced isolated USB repeater in a 16-pin SSOP (DWZ-16) package. The evaluation module has test point and jumper options to support evaluation with minimal external components.
BYD Semiconductor announced the launch of an industrial-grade global shutter CMOS image sensor chip - BF3031. BF3031 is a 1/3-inch 500,000-pixel image sensor chip developed and produced by BYD Semiconductor using Global shutter technology. It supports parallel and MIPI digital output interfaces. The effective pixel array is 838×640, and the maximum frame rate is 120fps@full.
Würth Elektronik offers another high-quality switch from the series of washable tact switches. The WS-TASV Tact Switch for SMT assembly is extremely space-saving, with a footprint of only 4.1mm x 2.8mm and a height of 1.9mm. Three variants are available, colour-coded according to their actuating force: 200g (black), 300g (white), and 400g (salmon). The tact switches are developed for an operating temperature range of -55C to +125C.
Infineon Technologies AG and Delta Electronics have developed a three-in-one system that combines solar, energy storage and EV charging. Thanks to bidirectional inverters, the electric car is not only charged but can also be utilised as a buffer storage or as household emergency backup power. More and more cars are equipped for this. Bidirectional energy flows could also be employed to realise new vehicle-to-home (V2H) and vehicle-to-grid (V2G) solutions.
Texas Instruments offers high immunity, 5.7 kV reinforced single and triple channel digital isolators, ISO7830/31/10/10F are high performance single and triple channel digital isolators with 8000 V (PK) isolation voltage. These devices have enhanced isolation certification according to VDE, CSA and CQC. Isolators provide high electromagnetic immunity and low power consumption with low emissions while isolating CMOS or LVCMOS digital I/Os.
Broadcom's automotive high-precision r2 coupler isolation products provide enhanced isolation and reliability, Broadcom's ACPL-C87AT and ACPL-C87BT automotive isolation amplifiers utilize superior optical coupling technology, Sigma-delta (Sigma-Delta erta) analog-to-digital converters, chopper-stabilized amplifiers, and fully differential circuit topologies to provide unmatched isolation-mode noise rejection, low offset, high gain accuracy, and stability.
Texas Instruments provides SAR adc internal reference buffer, internal LDO, and multi-spi digital interface, DS8920B, ADS8922B and ADS8924B (ADS892xB) are pin-to-pin compatible, high-speed, high-precision successive approximation register (SAR) based ADCs family with integrated reference buffer and integrated low dropout regulator (LDO).
Bourns' CDTO269-BR1xL bridge rectifier product for power and switching power supply applications, Bourns offers the CDTO269-BR1xL overvoltage protection for rectification applications in a TO-269aa package, due to its comparable Large size difference, thus saving PCB footprint. The CDTO269-BR1xL diodes with overvoltage protection provide a forward current of 1A and selectable repetitive peak reverse voltages of 190 V and 380 V.
The Display Visions EA DOGXL240-7 offers a small, multi-function graphics display that is fully functional and has many lighting options, the EA DOGXL240-7 is the latest addition to the Display Visions EA DOG series. The graphics display has a resolution of 240 pixels x 128 pixels. It comes with a UC1611s controller, graphics RAM, and background lighting.
ON Semiconductor's NCP1623 Critical Conduction Mode (CrM) Power Factor Controller is designed to drive a PFC boost stage. Based on an innovative Valley Synchronous Frequency Foldback (VSFF) method, the NCP1623 operates in Critical Conduction Mode (CrM) until the power drops below a threshold level. The NCP1623A model features follower boost capability, which greatly improves low line efficiency. The device is also available in a SOIC-8 package and features an ultra-low power mode controlled externally by a disable pin.
NXP's USB Type-C CC provides an intelligent low-current source anti-corrosion solution, the NX20P0477 is a single-chip USB-c (USB-c) port overvoltage protection solution that integrates a moisture-proof and anti-corrosion algorithm. On the system side CC1 and CC2 pins are protected from 28 V short to V (bus). Available in 0.5 mm pitch, nine bumps, and 1.49 mm x 1.49 mm x 0.555 mm WLCSP packages.
Hirose's high power mezzanine connectors are available in a variety of stacking heights, IT-P was developed to provide a high power solution for any mezzanine application. Together with Hirose's high-speed IT series, the IT-p provides a perfect solution for connecting power without having to use high-speed contacts.
Microchip's 75 V/5 A DC/DC switching buck regulator has a unique adaptive on-time control architecture, and the MIC28515 is an adjustable frequency synchronous buck regulator with a unique adaptive on-time control architecture. The MIC28515 operates from an input supply range of 4.5 V to 75 V and provides a regulated output up to 5 A. The output voltage is adjustable to 0.6 V with an accuracy of ±1%. The MIC28515 provides a "mode" select pin that allows the user to select between ultra-light load and over-speed control operation.
Texas Instruments' 38v, three-phase, smart gate driver features three current-shunt amplifiers, the DRV8304 device is an integrated gate driver for three-phase brushless DC (BLDC) motor applications on 12v and 24v DC rails. These applications include Field Oriented Control (FOC), Sinusoidal Current Control, Trapezoidal Current Control Brushless DC Motors
Texas Instruments' INA233 is a high-side or low-side measurement, bidirectional current and power monitor with I2C, SMBus and pmbus compatible interfaces, the device monitors and reports the values of current, voltage and power. Integrated power accumulators are available for energy or average power calculations. Programmable calibration values, conversion times and averaging time, combined with an internal multiplier, enable direct readout of current in amps and power in watts.
TE Connectivity's DOG2 MEMS series dual-axis inclinometers are used for mobile leveling applications. The dual-axis inclinometers are mainly developed for platform leveling, engine dynamic management, rollover protection and tilt alarms. Fast response time and good accuracy make this device ideal for mobile leveling applications. It features digital signal processing, including temperature compensation. Integrated filters improve performance and allow the sensor to be used in many noisy environments (eg, vibration).
ROHM has developed a 1608 size (1.6mm × 0.8mm) optimized for micro-light-emitting applications for the indicator and digital display applications of FA equipment*2 including control devices such as PLC*1, modems, and routers, etc. ) LED "CSL1901 series".
STMicroelectronics has launched the L9918 automotive-grade alternator regulator, which ensures the stability of 12V automotive electrical systems with enhanced functionality.
